Become a Dealer Blog
Taal
NLD
USD
Selected Country:
[["US","AU","GB","DE"]]
    Registreren

    Totale prijs

    US$ 0,00

    Winkelmand 0 Winkelmand 0 Loading...
    Tonen : ALLE CATEGORIEËN 7 Energie Systeem 838 Radio Servo's 353 Servos 123 Alle Servo's 123

    BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g

    BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g

    You will earn 20 bonus points for buying this item.

    Generating Links

    BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g

     
    Prijs:

    Now save bespaar US$ 0,00 US$ 0,00

    US$ 25,25
    Verzonden vanaf:
    • USA
    Al gekocht Discontinued Product

    Please continue searching for a similar product.
    1 year warranty
    SKU:
    BMS-621MG
    Discontinued Product
    Please continue searching for a similar product.
    Geen verzendkosten? Klik hier meer leren!
    Meld een probleem Niet goedkoop?

    Deel de URL

    Product beschrijving
    BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g
    De servo heeft een servo accessoire pakket en is gemaakt met een zware servo geval de servo ontworpen voor R / C hoogwaardige Autotoepassingen. Dubbele kogellager met flexibele rubberen waterdichte, anders wordt de ourput spline is hetzelfde met Futaba 25 tand.

    Deze servo wordt geleverd met JR / Hitec S Connector ook bekend als een "universele connector". Zelfs dacht dat dit servo wordt geleverd met JR / Hitec S Connectors, deze servo is elektrisch compatibel met Futaba ontvangers.

    1. Metal gear
    2. curve versnelling met glad.
    3. Dubbelklik M9.6 kogellager (si-olie)
    4. 3 polige sterke koppel van de motor met een lage signaal beïnvloeden en succes te krijgen CE-certificering.
    5. Rubber passende case voor waterdichte
    6. Zelfde met Futaba 25 tand spline
    7. Heavy duty servo case


    Gewicht:     47 gram / ​​1,66 oz
    Afmetingen: 40,5 x 20 x 38,5 mm / 1,60 x 0,78 x 1,54 inch
    Koppel bij 4.8V: 6.4kg-cm, 89 oz-in
    Koppel bij 6.0V: 7,2 kg-cm, 109 oz-in
    Snelheid Bij 4.8V: 0.13 sec / 60 ° onbelast
    Snelheid Bij 6.0V: 0.10 sec / 60 ° onbelast

    Product specificaties
    • Servo Torque ( kg) ( min . 0,01 kg ) 7.20
    • Servo Snelheid ( Sec / 60deg ) 0.10
    • Servo A ( mm ) 42.00
    • Servo B ( mm ) 41.00
    • Servo C ( mm ) 37.92
    • Servo D ( mm ) 20.00
    • Servo E ( mm ) 54.00
    • Servo F ( mm ) 27.00
    attributeset-11
    Close

    Dimension Diagram Guide

    • attributeset-11

    Close

    Videos
    Upload video

    Registreer u om video's te uploaden aanmelden of registreren

    Bespreken 0
    Onderwerpen
    Sorteer op
    Meest recente onderwerpen
    * Bijnaam:

    * Uw antwoord:


    Voer de tekst in de afbeelding in het onderstaande veld in
    CAPTCHA Image
    *Verificatie code:
    annuleer
    Bevestig
    Plaats een nieuw onderwerp
    * Bijnaam:

    * Uw onderwerp:



    Voer de tekst in de afbeelding in het onderstaande veld in
    CAPTCHA Image
    *Verificatie code:
    Onderwerp plaatsen
    Recensie

    Registreer u om beoordelingen te schrijven aanmelden of registreren

    __Mac | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Mar 19, 2016

    I have installed this servo in my 2,6m 3d model as a gas sevro. After 20min of good work on the ground (while I was trimming a model) IT BURND!!! well, good that happend not in the air , not recommended

    coolmobility | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 25, 2015

    I've been using these for years in my yachts for rudder control and had only one fail.
    I sail in salt water and have had boats flooded, but I pack top gearbox with thick lanolin grease, add 'O' ring onto shaft, coat with liquid electrical tape (rubber compound) and they are bullet-proof. I use them in all my yachts. Great power, good centreing, tough and low power consumption.

    doodlebug | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 16, 2015

    Bought 5 for a seagull models mxs-r, all 5 initially looked very good, however, last night the throttle servo melted down, literally, lots of smoke and melted plastic. Fortunately the airframe was on the bench and not in the air. I have read other reports of BB servos melting down, I'll be pulling the rest and bench testing them for an extended period of time.

    Hudsonn | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Sep 16, 2014

    This bluebird BMS-621MG servo is very nice for the price. Quality seems great and speed/torque are quite good and more than adequate for on-road use like I use it. I can highly recommend this to everone.

    Satya | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Apr 13, 2014

    Ive brought 2 of these servos now and they both work perfectly! nice and fast and center every time, im using them on 1/10 drift cars with a 6v bec, i will be using the hi torque version in my scx10 trail truck when it shows up they are the best bang for buck around!

    Nounoun | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Nov 14, 2013

    it came very well packaged and with all the screws and arms. it gives 6.4Kg @ 4.8V and can withstand 6V. Great for RC car and plane

    Elvis Bogart | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Nov 11, 2013

    For the price this servo has a lot of torque and is very fast. My only complaint is it does not center well. Very good for a basher 2wd off road car steering or off road nitro throttle on a budget.

    LaMont | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Mar 02, 2013

    I purchased two that run in my 1/8 scale buggy. Good torque, centers great, and noticeable quick speed. I ordered two more to replace my steering servos in my 1/10 scale nitro touring car and 1/10 electric touring car.

    Henrique | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 25, 2013

    That it is what i call a very good servo. it is very fast, Reliable and cheap! I used it in my SC10 truck and now it is my rc drift car =)
    I have no problema with this servo. I will buy more....

    thecount6468 | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Jan 14, 2013

    Purchased 9 of these servos and 3 burned out during installation. I didn't expect to find that 30 percent of these servos were faulty

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 11
    Handleidingen / Bestanden
    Upload bestand

    Registreer om bestanden te uploaden.
    Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

    Gerelateerde Producten

    Need Help
    Live chat

    © 2024 HobbyKing. All Rights Reserved.

    Trustpilot