New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g

BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g

Shipped From:
  • Global

Now save bewaar € 0,00 € 0,00

€ 21,64
Alert me
status:
Uit voorraad!
Gewicht:
79 g
SKU:
BMS-621MG
WANT FREE SHIPPING? Click here to find out more!
BMS-621MG High Speed ​​Servo (Metal Gear) 6.4kg / .13sec / 47g
De servo heeft een servo accessoire pakket en is gemaakt met een zware servo geval de servo ontworpen voor R / C hoogwaardige Autotoepassingen. Dubbele kogellager met flexibele rubberen waterdichte, anders wordt de ourput spline is hetzelfde met Futaba 25 tand.

Deze servo wordt geleverd met JR / Hitec S Connector ook bekend als een "universele connector". Zelfs dacht dat dit servo wordt geleverd met JR / Hitec S Connectors, deze servo is elektrisch compatibel met Futaba ontvangers.

1. Metal gear
2. curve versnelling met glad.
3. Dubbelklik M9.6 kogellager (si-olie)
4. 3 polige sterke koppel van de motor met een lage signaal beïnvloeden en succes te krijgen CE-certificering.
5. Rubber passende case voor waterdichte
6. Zelfde met Futaba 25 tand spline
7. Heavy duty servo case


Gewicht:
47 gram / ​​1,66 oz
Afmetingen: 40,5 x 20 x 38,5 mm / 1,60 x 0,78 x 1,54 inch
Koppel bij 4.8V: 6.4kg-cm, 89 oz-in
Koppel bij 6.0V: 7,2 kg-cm, 109 oz-in
Snelheid Bij 4.8V: 0.13 sec / 60 ° onbelast
Snelheid Bij 6.0V: 0.10 sec / 60 ° onbelast

  • Sku BMS-621MG
  • Brand Bluebird
  • Gewicht ( g) 79.00
  • Lengte 140.00
  • Breedte 30.00
  • Hoogte 100.00
  • Torque ( kg) ( min . 0,01 kg ) 7.20
  • Snelheid ( Sec / 60deg ) 0.10
  • A ( mm ) 42.00
  • B ( mm ) 41.00
  • C ( mm ) 37.92
  • D ( mm ) 20.00
  • E ( mm ) 54.00
  • F ( mm ) 27.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have installed this servo in my 2,6m 3d model as a gas sevro. After 20min of good work on the ground (while I was trimming a model) IT BURND!!! well, good that happend not in the air , not recommended

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have installed this servo in my 2,6m 3d model as a gas sevro. After 20min of good work on the ground (while I was trimming a model) IT BURND!!! well, good that happend not in the air , not recommended

I've been using these for years in my yachts for rudder control and had only one fail.
I sail in salt water and have had boats flooded, but I pack top gearbox with thick lanolin grease, add 'O' ring onto shaft, coat with liquid electrical tape (rubber compound) and they are bullet-proof. I use them in all my yachts. Great power, good centreing, tough and low power consumption.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've been using these for years in my yachts for rudder control and had only one fail.
I sail in salt water and have had boats flooded, but I pack top gearbox with thick lanolin grease, add 'O' ring onto shaft, coat with liquid electrical tape (rubber compound) and they are bullet-proof. I use them in all my yachts. Great power, good centreing, tough and low power consumption.

Bought 5 for a seagull models mxs-r, all 5 initially looked very good, however, last night the throttle servo melted down, literally, lots of smoke and melted plastic. Fortunately the airframe was on the bench and not in the air. I have read other reports of BB servos melting down, I'll be pulling the rest and bench testing them for an extended period of time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought 5 for a seagull models mxs-r, all 5 initially looked very good, however, last night the throttle servo melted down, literally, lots of smoke and melted plastic. Fortunately the airframe was on the bench and not in the air. I have read other reports of BB servos melting down, I'll be pulling the rest and bench testing them for an extended period of time.

This bluebird BMS-621MG servo is very nice for the price. Quality seems great and speed/torque are quite good and more than adequate for on-road use like I use it. I can highly recommend this to everone.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This bluebird BMS-621MG servo is very nice for the price. Quality seems great and speed/torque are quite good and more than adequate for on-road use like I use it. I can highly recommend this to everone.

Ive brought 2 of these servos now and they both work perfectly! nice and fast and center every time, im using them on 1/10 drift cars with a 6v bec, i will be using the hi torque version in my scx10 trail truck when it shows up they are the best bang for buck around!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive brought 2 of these servos now and they both work perfectly! nice and fast and center every time, im using them on 1/10 drift cars with a 6v bec, i will be using the hi torque version in my scx10 trail truck when it shows up they are the best bang for buck around!

it came very well packaged and with all the screws and arms. it gives 6.4Kg @ 4.8V and can withstand 6V. Great for RC car and plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it came very well packaged and with all the screws and arms. it gives 6.4Kg @ 4.8V and can withstand 6V. Great for RC car and plane

For the price this servo has a lot of torque and is very fast. My only complaint is it does not center well. Very good for a basher 2wd off road car steering or off road nitro throttle on a budget.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the price this servo has a lot of torque and is very fast. My only complaint is it does not center well. Very good for a basher 2wd off road car steering or off road nitro throttle on a budget.

I purchased two that run in my 1/8 scale buggy. Good torque, centers great, and noticeable quick speed. I ordered two more to replace my steering servos in my 1/10 scale nitro touring car and 1/10 electric touring car.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased two that run in my 1/8 scale buggy. Good torque, centers great, and noticeable quick speed. I ordered two more to replace my steering servos in my 1/10 scale nitro touring car and 1/10 electric touring car.

That it is what i call a very good servo. it is very fast, Reliable and cheap! I used it in my SC10 truck and now it is my rc drift car =)
I have no problema with this servo. I will buy more....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

That it is what i call a very good servo. it is very fast, Reliable and cheap! I used it in my SC10 truck and now it is my rc drift car =)
I have no problema with this servo. I will buy more....

Purchased 9 of these servos and 3 burned out during installation. I didn't expect to find that 30 percent of these servos were faulty

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Purchased 9 of these servos and 3 burned out during installation. I didn't expect to find that 30 percent of these servos were faulty

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!