Become a Dealer Blog
Taal
NLD
USD
Selected Country:
[["US","AU","GB","DE"]]
    Registreren

    Totale prijs

    US$ 0,00

    Winkelmand 0 Winkelmand 0 Loading...
    Tonen : ALLE CATEGORIEËN 7 Energie Systeem 838 Radio Servo's 353 Servos 123 Alle Servo's 123

    BMS-760DMG Low Profile Digital Servo (Metal Gear) 5,6 kg / .18sec / 34g

    BMS-760DMG Low Profile Digital Servo (Metal Gear) 5,6 kg / .18sec / 34g

    You will earn 28 bonus points for buying this item.

    Generating Links

    BMS-760DMG Low Profile Digital Servo (Metal Gear) 5,6 kg / .18sec / 34g

     
    Prijs:

    Now save bespaar US$ 0,00 US$ 0,00

    US$ 35,97
    Verzonden vanaf:
    • USA
    Al gekocht Discontinued Product

    Please continue searching for a similar product.
    1 year warranty
    SKU:
    BMS-760DMG
    Discontinued Product
    Please continue searching for a similar product.
    Geen verzendkosten? Klik hier meer leren!
    Meld een probleem Niet goedkoop?

    Deel de URL

    Product beschrijving
    BMS-760DMG Low Profile Digital Servo 5,6 kg / .18sec / 34g
    Met een lage impedantie en precisie-uurwerk elektronisch, worden deze low profile servo's ontworpen voor high-performance F3A precisie aerobatic gebruik. Ze zijn ook een goede keuze voor bewegende mechanische intrekken versnellingen op een realistische manier.
    De servo zal automatisch leren van de gebruiker '' s zendpuls timings en sluit in het signaal iedere keer. De servo bevat ook een signaal buffer in de CPU met een fail-safe-functionaliteit. De motor wordt gewonden met 2PEW dunne gecoate draad voor een beter elektrisch geleidingsvermogen en kan boven 120 ° C weerstaan ​​zonder afbraak.
    De servo wordt geleverd met een accessoire-pakket en de universele JR / Hitec "S"
    1. Metal Gear
    2. Double M9.6 kogellager (si-olie)
    3. 3-polige high-torque motor met lage RF-ruis (CE gecertificeerd)
    4. Rubber afdichtingen voor waterdichte behuizing
    5. Futaba compatible 25 tand uitgang spieën
    6. Heavy duty servo case
    7. Digital IC - SOP-pakket met 12bit gegevensoverdracht
    8. MOS-FET motor driver chips die overweg kan met 7A piekbelastingen
    9. Digitale motoraandrijving met ultra-square PWM-signaal
    10. Automatische bepaling van de servo centrum pulsbreedte
    11. toestellen van het metaal van aluminium 6061 materiaal in combinatie met licht en sterk materiaal C95


    Gewicht: 34 g / 1.19oz
    Afmetingen: 42 x 21,5 x 22 mm / 1,65 x 0,85 x 0,87 inch
    Koppel bij 4.8V: 5,6 kg / cm, 79 oz / in
    Koppel bij 6.0V: 7,2 kg / cm, 112 oz / in
    Snelheid Bij 4.8V: 0.18 sec / 60 ° onbelast
    Snelheid Bij 6.0V: 0.16 sec / 60 ° onbelast
    Product specificaties
    • Servo Torque ( kg) ( min . 0,01 kg ) 7.20
    • Servo Snelheid ( Sec / 60deg ) 0.16
    • Servo A ( mm ) 27.00
    • Servo B ( mm ) 43.00
    • Servo C ( mm ) 24.00
    • Servo D ( mm ) 21.00
    • Servo E ( mm ) 55.00
    • Servo F ( mm ) 16.00
    attributeset-11
    Close

    Dimension Diagram Guide

    • attributeset-11

    Close

    Videos
    Upload video

    Registreer u om video's te uploaden aanmelden of registreren

    Bespreken 0
    Onderwerpen
    Sorteer op
    Meest recente onderwerpen
    * Bijnaam:

    * Uw antwoord:


    Voer de tekst in de afbeelding in het onderstaande veld in
    CAPTCHA Image
    *Verificatie code:
    annuleer
    Bevestig
    Plaats een nieuw onderwerp
    * Bijnaam:

    * Uw onderwerp:



    Voer de tekst in de afbeelding in het onderstaande veld in
    CAPTCHA Image
    *Verificatie code:
    Onderwerp plaatsen
    Recensie

    Registreer u om beoordelingen te schrijven aanmelden of registreren

    Vytautas | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Feb 28, 2012

    At first glance, it seemed perfect. It was purchased 5 units. Unfortunately during operation showed that the vibration increases current consumption of up to 1A or more per servo. Due to the current consumption necessary for powerful on-board power supply, so they had to change to another brand .. with which no such problems. Other companies servo under the same conditions required only to 0.4 A current. Do not trust the current consumption, in addition it requires very frequent on-board battery charging.

    Klant | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Jun 04, 2011

    I have bought 3 of them for Tucano 60. Two are used for retracts (with "Turnigy 3 Channel Servo Speed/Direction Regulator" from HK) and one for elevator. Powered from 6V regulated and Assan X8 R9 9Ch 2.4GHz Receiver. I have noticed to issues with that configuration:
    1. BMS servos love to buzz. Even not loaded and centered they make sound most of the time.
    2. Elevator servo do not initialize after powering on (behaves like dead) unless I move the stick all the way to extreme position. After that servos "wakes up" and works normally.

    These two issues could be compatibility issue with Assan Rx as these servos work normally with other receivers (analog and digital) and servo tester. Other servos I have (analog and digital) work normally with that Assan 9ch Rx.
    I will keep these servos for gear as they always start with extreme position (gear is up or down), but one will go away from elevator as at "low rate" the servo does not "wake up".

    AJ240 | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Jan 16, 2011

    These are a perfect replacement for the retract servos in the Durafly Spitfire.

    BELADOG | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Jun 03, 2010

    Great servos! Have two in the Paramotor. Very strong and Fast! Low twitch and not as loud as some say.

    michel54 | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    May 07, 2010

    raisonnable pour le prix a voir en fonctionnement

    stearmanpt17 | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    Feb 27, 2010

    Great servos good power use in my 2M Salto sailplane for trailing edge breaks.

    Klant | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Jan 27, 2010

    Bought 5 of these for a 26cc yak. The weight vs performance is amazing, and they center really well, and are fast and torqy. replaced a bunch of hitec metal gear servos with them. Took my yak from 9lb 4oz to 8lb 13 oz. The gears are loud, the motors ar vary strong and way under geared so they are hard to turn by hand and feel grindy. The greas inside sucks, hardly any, i cleaned it out and put in heavy machine greas and it smoothed them out a lot

    Caveman | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Customer Rated

    Nov 11, 2009

    Just bought 2 of these to try out. Only tried bench tests so far.

    @ 5.3 volts - a little noisy but not bad for metal gears.

    No load - rotating - .4 amp

    1kg/cm load - static .4 amp rotating .4 amp

    2kg/cm load - static .6 amp rotating .6 amp

    5kg.cm load - static .8 amp rotating 1.1amp

    No noisier or evident loss of performance under load. All amperages are averages over several cycles. Flight tests next. Very happy with them so far.

    | Geverifieerde koper

    • Overall
    • Quality
    • Value

    Certified Buyer Rated

    May 27, 2009

    Powerfull, fast, responsive and very strong. I have 4 of these on my Pulse 60 XT. These servos have no problem whipping this 8.5 lb. plane through the air.

    David Appleton | Geverifieerde koper

    • Overall
    • Quality
    • Value

    760DMG servo

    Mar 18, 2009

    great servo, ideal for tight tail ends on models. Speed and accuracy excellent, good accessories. ordered two of these and both 'sing' quite audibly during operation, more so than other digital servos i've had from HK. Other than that i'm very happy!! Grab them while they're in stock

    Handleidingen / Bestanden
    Upload bestand

    Registreer om bestanden te uploaden.
    Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

    Need Help
    Live chat

    © 2024 HobbyKing. All Rights Reserved.

    Trustpilot