BMS-A206 MG Digital Mini Servo 3.2kg / 0.05sec / 22,5 g
Excelllent keuze voor mini-helikopter staart servo.
Gewicht: 22,5 g
Afmetingen: 23 x 12 x 27.25mm
Operating Voltage: 4.8 ~ 6V
Koppel: 2,6 kg / cm @ 4.8V, 3,2 kg / cm @ 6V
Snelheid (sec / 60 deg): 0,06 @ 4.8V, 0,05 @ 6V
Motor Type: Japan Coreless
Case: Volledige Aluminium Case
Lead / Plug: JR Type
Dual Ball Bearing
All Metal Gears
Digitale 12-bits resolutie (4096 stappen)
Gewicht ( g)
Snelheid ( Sec / 60deg )
Torque ( kg) ( min . 0,01 kg )
Unit Weight (g):
A ( mm ):
B ( mm )
C ( mm )
D ( mm ):
E ( mm ):
F ( mm )
Use these on my Align 250DFC's and very happy. They're fast and hold rock sold...highly recommend.Amazing servo.
I'm using it for the roll on a ultra light gimbal, and gimbals require the highest requirements from servos. And this meets them all!!
Its fast, strong, and extremely smooth, centers perfectly.
The only issue I had was that the servo is directly connected to the bottom plate, which gives a ratio of 1:1 angle of camera to angle of servo. Since there is just a very little bit of free movement due to the metal gears, the gimbal was oscillating between the 2 lsbs of the 12 bit adc, causing a wobble in the video. So I had to dampen then movement by adding some soft foam between the movements, and now it works perfect.Hi there,
ordered this servo because of need for a super heli tail servo. As I noticed this one is the best quality servo I ever held in hands. No sloop, no shivering, stays cold, super fast and absolute precise. Best choice for perfectionists.