Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

C05XL Micro borstelloze outrunner 10800kv

C05XL Micro borstelloze outrunner 10800kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
23 g
SKU:
C05XL-10800
Product
Omschrijving
C05XL Micro borstelloze outrunner 10800kv

Specificatie:
Gewicht: 6.8g
Kv: 10800rpm / v
Afmetingen: 24 x 13.9mm
Max stroom: 4A / 40W
Huidige: 4.2V / 0.82A (onbelast)
Shaft: 1.5mm
Shaft lengte: 7mm
Product
Specifications

Aanvullende Informatie

  • Sku:
    C05XL-10800
  • Brand:
    Nee
  • Gewicht ( g)
    23.00
  • Lengte
    70.00
  • Breedte:
    14.00
  • Hoogte:
    50.00
  • Kv ( tpm / v )
    10800.00
  • Max Currents (A )
    4.00
  • Vermogen ( W):
    40.00
  • Lengte B ( mm ):
    15.00
  • Kan Lengte D ( mm )
    9.00
  • Max Voltage ( V )
    4.00
  • Shaft A ( mm ):
    2.00
  • Unit Weight (g):
    6.8
  • C Diameter ( mm )
    14.00
  • Totale lengte E ( mm )
    22.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very good motor I use it on my walkera 4#6S , replaced the old inrunner motor.Now I could see the flight difference ,longer flight time and good headspeed match it with 15 or 16 pinion.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good head speed with a 9 tooth but not much power. I would start with 8 tooth. Not sure if its the motor or the speedo but have to hand start this with hk 7a speedo w/convertor. Runs well once started.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice little critter. HK got the specs WRONG, the shaft diameter is 1,5mm, not 2mm!! Runs well on my v120d02 as a drop-in replacement with a 15T Pinion. Make sure that you use 1mm spacers when using the original motor screws, otherwise they will block. Has even a little more grip with 17T Pinion but then you get over one minute less flight time than with 15T.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
its been getting a lot of reviews so i order 1 , ill follow up on the result once i get it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
You gotta have this one for your 4G3, 4G6 or V120xxx! Use mine with a 18 teeth pinion on 600mAh15C lipo's on a 4G3. Better than HP06, makes it feel powerful. About 6-7 minutes of fast flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor. I use it in a Walkera V120D01 with the stock ESC and it makes the heli so much more alive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best for walkera 4g6 and 4#6. Pending to mount on CB100. You need to buy a 16T or 15T pinion with 1.5mm hole. You can't find in HK but there are other places. With this you can fly more time with more power.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Best for walkera 4g6 and 4#6. Pending to mount on CB100.
You need to buy a 16T or 15T pinion with 1.5mm hole. You can't find in HK but there are other places. With this you can fly more time with more power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Once installed on the 4 # 6S with 20T pinion it into a beast ..... When you first start ended on the ceiling, with broken rotor. :-(... Engine seems fine, does not heat as the original. Time will tell how durable it is.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i just got one on the last day. It 's aweesome motor when I put it on wk HM 4#6 with 16 T pinion and stick ESC. I like it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.