Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

C2020 Micro borstelloze Outrunner 3500KV (11g)

C2020 Micro borstelloze Outrunner 3500KV (11g)

QTY:

Now save bewaar € 0,00 € 0,00

€ 8,65
Stock:
Gewicht:
42 g
SKU:
C2020/25

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

Specificaties.
Diameter: 20.2mm
Lengte: 20mm
Shaft: 5mm
Gewicht: 11g (met 10cm draad)
Vermogen: 60W
Kv: 3500rpm / v
Turns: 25
Resistance: 262
Idle Current: .3A
Max amp: 10A (15sec burst)
Voltage: 2-4cell LiPoly


Wij hebben geen verplichting prop maat voor deze kleine motor nog.
Zodra we hebben de gegevens, zullen wij het ​​nemen in deze lijst.

Product
Specifications

Aanvullende Informatie

  • Sku:
    C2020/25
  • Brand:
    Nvt
  • Gewicht ( g)
    42.00
  • Lengte
    65.00
  • Breedte:
    40.00
  • Hoogte:
    40.00
  • Kv ( tpm / v )
    3500.00
  • Max Currents (A )
    10.00
  • Vermogen ( W):
    60.00
  • Lengte B ( mm ):
    14.00
  • Kan Lengte D ( mm )
    6.00
  • Max Voltage ( V )
    15.00
  • Shaft A ( mm ):
    2.00
  • Unit Weight (g):
    11
  • C Diameter ( mm )
    20.00
  • Totale lengte E ( mm )
    23.00
  • Resistance ( mh ):
    262.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I ordered 2 of these motors; one works fine with a 5x3 GWS prop with hub reamed out to fit. I'm using a HK 8-10 ESC. The second motor does not work properly, only spinning up to half speed before it quits. It will restart if the throttle is closed and re-opened, but will quit at half speed. It will spin up to full speed with no prop on it. I tried a 30A ESC but got the same results. I think the motor is defective out of the box, but it's not worth mailing back to HK on their RMA procedure.
Quality
Value
Overall
Quality
Value
Overall
I bought two of these motors for a bonzai, they work very well with that small wing. There is an issue keeping the prop on, maybe not quite as big a problem for a pusher, but the prop does damage the wing when it comes off. I have not found a prop that fits without some sort of modification, and the supplied rubber rings are too big. That seems to be the only issue.
Quality
Value
Overall
Quality
Value
Overall
Nice little motor, fits perfect on micro pcb quad frame. But you have to be VERY!!! careful with the wires, don't bend them more than two times!
Quality
Value
Overall
Quality
Value
Overall
Good little motor - Plenty of power running on 600mm span canard (outdoor model) with a 5x3 GWS prop. Pulls 6A on a 2s 350mah Zippy Flightmax battery - Total 42Watts. Prop adapter doesn't seem to fit any prop without modification (had to drill out the GWS prop to suit). O ring bands that came with the motor were far too big, hence only 4 stars.
Quality
Value
Overall
Quality
Value
Overall
when it worked it was fine, but sadly never made it into the air, as the extremely delicate wires from the winding had a fracture from rather minimal but repeated movement - too small to fix where the break occurred; need more care with the next one, because otherwise it's a good motor with a 4025 prop on 2s
Quality
Value
Overall
Quality
Value
Overall
early testing yet, but running a 2s 460mah nanotech via a turnigy plush 6amp esc, i pull 26.6 watts at just under 4amps with a gws 4025
Quality
Value
Overall
Quality
Value
Overall
11.6gm with bare wires; diameter 20.3mm; mounting holes centres at 13mm from the axis; spins up nicely on a 2s lipo using a 12amp blue series esc, and sounds lovely; once i get the watts up meter cranking i'll try and post some numbers loaded with my assorted props to assist other shoppers
Quality
Value
Overall
Quality
Value
Overall
Got touched on this one!!! Connected wires to esc that i know works and motor flickers back and forth... Rechecked connections and same result. Checked resistance between wires and one has a high resistance inside motor.. dud motor..
Quality
Value
Overall
Quality
Value
Overall
comprei esse modelo de motor para colocar em uma asinha BONSAI, mas fritou na primeira acelerada! mesmo que no fritasse, no iria ficar rpido o quanto eu esperava

hi, I have received mine today, but it burn! i bought to use with a bonsai wing but didn't worked well, very weak!
Quality
Value
Overall
Quality
Value
Overall
I ordered 2 of these, only problem was to keep the prop on. I had to make a strap of sheet aluminum because the o-rings wouldn't keep the prop on at top speed. These little motors are great, but need to increase shaft length so a prop adapter can be used. When I get prop and power data I will post it.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.