C2024 Micro borstelloze Outrunner 1600kv (17 g)

• Overall
• Quality
• Value

cool

Nov 04, 2019

No issues to report - it's what it says it is.

• Overall
• Quality
• Value

Nice units for my project

Oct 19, 2019

Worked well for my foamy build.

• Overall
• Quality
• Value

Not the greatest...

Sep 27, 2019

Smooth as all hell, buttery in fact. However that prop saver is really something to be desired... I really wish I could take it off, I’m a real experimental maker and I like to try out all the props. I’m super limited to 2 vein props and that just WONT DO.

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 25, 2013

Nice machined little Motor with good look, and it has enough power for my small antik slow flyer. Theese golden coloured turnigy motors are very good quality. I have several of them, ans, as of now, absolutely no complaints. All are working perfectly.

• Overall
• Quality
• Value

Customer Rated

Aug 17, 2013

I have 4 of these and they take a beating .. used on puddleshark foamies and have had many nose dives into the dirt from teaching kids how to fly they all are still working eve n with slightly bent shafts .. I use 10a or 12a esc and 800mah2s battery with a 7x6 prop. I have tried 8" props but they aren't as profiecent the other prop that works is a 7x6 SF and the planes are between 150g and 200g auw depending on the plane

• Overall
• Quality
• Value

Certified Buyer Rated

May 21, 2013

Used this is a 1/12 control line. Simplay great!

• Overall
• Quality
• Value

Customer Rated

Mar 13, 2013

I don't know how you can say this c2024 motor will pull a 8043 prop. I tried it on my 138g plane and the plane will hover with a little pull out power,but the motor gets very hot. I also tried a 7060 prop and it doesn't get hot but it will not hover. It also is a amp hog with the 8043 prop.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 20, 2011

50/50 chance of working. Prop saver for me was no good - too wobbly. Will probably see if can cut the prop saver hub off and use a prop adaptor on the shaft instead.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 11, 2011

Own many Turnigy motors. This one is going in a Park Scale Models Cessna 187. One front and one back. Will be using 8x4 props and 15 amp escs. Love these motors.

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 06, 2010

Brushless molto buono da utilizzare su un aereo micro.