C2226 Micro borstelloze Outrunner 1800kv (21g)

• Overall
• Quality
• Value

Customer Rated

Aug 15, 2016

love this motor use it on a 600mm wing with a 3s lipo, 6x4 apc prop, and a 10 amp turnigy esc little thing scoots run battery after battery no problems.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 01, 2016

vorsicht- alles ein bischen d?nn und leicht gebaut. Bei dem Auswechseln der Welle aufpassen sonst bricht alles.

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 09, 2015

perfect motor all the way, I am using 4 of these motors and love them, they work flawlessly and are cheap! I think they are the best deal for this size motor

• Overall
• Quality
• Value

Customer Rated

Nov 20, 2014

These motors may work ok and are quite strong...

but it is almost IMPOSSIBLE TO MOUNT THESE things like you want to. I've had to try 3D printing several different propeller and motor mounting methods to get these to fly my quadcopter. The shaft is TOO SHORT. grr... lots of time wasted just trying to mount these things.

• Overall
• Quality
• Value

Customer Rated

Aug 27, 2013

put this motor on the outside of firewall on the HK mini stick arf. what a performer for such a little guy!! I have a 850mah 2S stuffed into the nose hatch (hence outside firewall mounting) and a plush 12A esc and a caseless 615rx directly in front of the elevator and rudder servos. this motor is super easy to install, just drilled 1.5mm holes and threaded screws then ca just like servo mounting. holds firm because its so little. using an apc 6x5.5 prop drawing 7.8 - 8.5 amps depending on battery. zips right along on this small model, and im sure would be great for anything in the 100-150g rtf weight range.

• Overall
• Quality
• Value

Customer Rated

Sep 02, 2011

I use six of this motors for my shrediquette mm6 multiwii clone and they perform great. Using them with the turnigy plush 10a esc and gws 5x3 three-blade-props.

After a big crash one shaft is bend, but this does not affect the review, cause every motor would have been damaged in this crash.

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 21, 2011

Good fast motor! I works flawlessly! I put in the park airplane weighing 240 grams. Battery 2s500mah, Prop 8x6

• Overall
• Quality
• Value

Customer Rated

Nov 13, 2010

strong motor, prop save doesnt hold prop too well, it wobbles off at hi speed.need to look for a smaller rubber o-ring. doesnt heat up a lot, running 3S 1250 mAh. 7x35 prop, zoom-zoom-zoom!

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 07, 2010

Used the wrong prop, stupid because the motor became a smoker.

• Overall
• Quality
• Value

Customer Rated

Jul 01, 2010

Great Motor on 2S with 7x4 APC prop, pulls my 7.5 oz scratchy almost vertical. Only 3 stars as I fried the motor within 1 minute with a 3s with the same 7x4 prop. This is a great 2S motor but it can not even handle a 3s without a load on it. Do not use this motor with a 3s lipo or it will be FRIED!!!!!!!!