ARF 63inch CAP 232
Groot, en een zeer indrukwekkende pre-built cap.
Die-hard bouwers zou het moeilijk vinden om hun neus snob bij dit beest!
Spanwijdte: 63,4 in (1610 mm)
Wing Gebied: 702 sq in (45,3 dm2)
Flying Gewicht: 6,5 pond (2950 g)
Model Gewicht (zonder motor etc ..): 1300g
Romp Lengte: 53 in (1340 mm)
Vereist: 50-65 300KV motor of groter (4-5S)
We hebben genoeg van de motoren en BESCs dat dit vliegtuig zal passen!
Vanwege de grootte van de doos, kan dit toestel alleen verstuurd EMS express.
Bestellingen die met Air Parcel kunnen worden geweigerd.
Capaciteit ( mAh )
Gewicht ( g)
I like all the people wrote in om the plane all the information is very helpful. and the plane. cap 232 looks very nicw
Oh when does it come to stock im dying for one!HAD ONE OF THESE BEFORE BUT TREES GOT IN THE WAY LOL
SO IM WAITING FOR STOCK TO COME IN NOW I WILL BE FITTING A ASP 4S 120 GLOW WITH SMOKE
GREAT PLAIN FUN TO FLY. NOT FOR THE BEGINNER.
WILL LET YOU NO HOW I GO WHEN IVE HAD THE MADDEN
GREAT MODELJESUS H. CHRIST...HK YOU GIVE A DOGS BUTT HEART BURN....WAITING FOR YOU TO STOCK IN PLANES...I WILL GIVE IT UNTIL JULY 1ST THEN GO BUY ELSEWHERE!!!WATCH OUT WITH WING SHARE WEBS.
I had one of this planes after some serious 3D maneouvers one wing broke duirng flight and down it went, total loss.
after necropsy found share webs where 1/16 balsa and not complet from rib to rib, spars where 3/32 soft balsa.
No wonder why wing broke in flight.
If you buy one, make sure you retire low wing covering and reinforce spars with CF and 1/8 balsa share webs, rib to rib.HK please get this big bird in stock by next week and I will buy it........Man, what a plane.........looks great i am beginner a building first kit every but still got it ok I am running a TURNIGY 50-65B 350kV and a TURNIGY 60A ESC with switched BEC connected to a 6S Lipoly setupOver all it is good value for money
this kit not for beginner builder
my cowl had no clear coat on it & the withe color was a bit yellow
the rudder have a weak constriction for its size, no pilot, no spinner
I had .75cu engine on it & it flies well
bit hard to land when it's windy.
Looks nice & I'm happy with itBox arrived yesterday with my CAP232 and associated goodies.
One thing that is not mentioned in ANY review or HK blurb is the fact that the wing is 1 PIECE after Construction,have to modify to 2 piece for transport .
Flightmax 2x3s3000 and 2x3s4000 to power Turnigy 5065 350Kv with a SS60-70 ESC,
TEST run with a Master Airscrew14x8 only drew 26Amps
Assan 2.4Ghz receiver
All up, beautiful kit for an experienced builder thanks
I would like ask, it is possible this sum send to the Czech Republic? Mates here from Czech say, that the is that a already much heavy weighted.
I'd like about answer from HC, if it go at once lunching. Pray for reply to enamel firstname.lastname@example.org
I'm looking forward to early answer, raslik