Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Carbon Fiber Propeller 11x5 Black (CW / CCW) (2 stuks)

Generating Links

Carbon Fiber Propeller 11x5 Black (CW / CCW) (2 stuks)

Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 10,97
Toestand:
Uit voorraad!
SKU:
445000038-0
Geen verzendkosten? Klik hier meer leren!

Dit zijn een aantal leuke Carbon Blades voor multi-rotor projecten, ze worden geleverd als een tegengesteld draaiende paar (1 links, 1 x rechts). Deze bladen weegt 15 gram per stuk en zijn zeer goed afgewerkt! Deze propeller paar wordt geleverd met contentric centrering ringen om nauwkeurige centrering te garanderen.

specs:
Diameter: 11 inch
Pitch: 5 inch
Hub dikte: 8mm
Shaft diameter: 6mm
Gewicht (per stuk): 15g  

  • Propeller Diameter X ( Inch) 11.00
  • Propeller Pitch Y ( Inch) 5.00
  • omwenteling CW/CCW
attributeset-13
Close

Dimension Diagram Guide

  • attributeset-13

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Petsinis Panagiotis | Geverifieerde koper

  • Overall
  • Quality
  • Value

OK

Jan 13, 2023

quadromania | Geverifieerde koper

  • Overall
  • Quality
  • Value

Carbon Fiber Propeller 11x5 Black (CW / CCW) (2 stuks)

May 24, 2022

good blads, balance , not a lot of power, gentel

Anders J | Geverifieerde koper

  • Overall
  • Quality
  • Value

Driving the two motors in the Stick without problems.

Aug 05, 2019

Driving the two motors in the Stick without problems. The Stik had vertical prestanda.

PatrickB | Geverifieerde koper

  • Overall
  • Quality
  • Value

Very good products

Jul 26, 2019

I don't use any other prop since I bought them, perfect for their resistance and output.
Very good product but obligation to check balancing the first time

petrim | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 05, 2016

Very nice finish! Almost perfect balance, so I was lucky.
Very stiff and do not bend at all in flight. Quad is much more responsive with these props compared to basic carbon mixed ones.
Balanced them with piece of tape, took 15 minutes x 4 props.
I use them in a 450 class "reptile" type frame, NTM 28-30S 800kv, with 1.9Kg weight, very nice! Thrust is more than enough.

pilotoheavy | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2015

pales molt maques i ben fetes. llastima que no vinguin equilibrades. bon rendiment i dures. les faig servir amb un2830 1100kv. variadors de 30 ampers. no s'escalfan gaire. estan molt be pero es tenen que equilibrar.

david | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2015

Good and solid product ... but you need to balance it, and if you compare to common plastic slowfly props 11x47, this model gives less trust due to its design.
But for the price ... don't hesitate even a second !!!

gammelman | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2015

HK negative censorship police have been out again write comment with something negative about a product and you have a 95pcnt chance that your review will be deleted shame on you HK Let all the reviews good and bad remain otherwise you are a bunch of hypocrites my Propps was just garbage when the hole in the hub was not centered

Nicolas | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

May 21, 2015

true carbon propellers. they still last on my large quadcopter build. no hit could break them till now. just be sure to put thread locker on the screw, otherwise it's very dangerous if one of these flies off! happened to me and from then on I always put a lot of thread locker on the motor screw before fixing it!

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 23, 2015

Used these on my Tricopter with Multistar 2216 800kv motors. Motors are still cool to the touch! Feels very firm. Finishing could be better but for the price...we shouldn't ask for anything more. One prop has uneven coating and a little of the CF was exposed. Had to smear some CA to patch that and re balance. Will need some balancing due to the uneven finishing. But good product overall. Do check for cracks or wear pre and post flight! Stay Safe!

  1. 1
  2. 2
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!