Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

(Compleet) Sukhoi SU-29 Carbon Fiber landingsgestel 1980mm Gas (ARF)

(Compleet) Sukhoi SU-29 Carbon Fiber landingsgestel 1980mm Gas (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
9100 g
SKU:
SU-2935CF
Product
Omschrijving

Dit prachtige Benzine SU-29 is een model van de 2 zetel variant wereldwijd gebruikt voor aerobatic training. De SU-29 was een ontwikkeling van de SU-26 en deelt veel van dezelfde componenten, ondanks de extra kracht van deze briljante Sukhoi aerobatic vliegtuigen, de gewichtstoename over de SU26 was slechts 50kg geven uitstekende prestaties.

Deze grote Sukhoi is prachtig gebouwd en bedekt, de regeling is heel simpel, op slechts donker blauw aan de onderkant voor een gemakkelijke oriëntatie. Alle hardware is in de eerste klas kwaliteit, met inbegrip van een CF vleugel buis, full CF onderstel en heavy duty ball-links op alle controle oppervlakken. Zowel de vleugel en de horizonal stab zijn afneembaar voor gemakkelijk transport. Roer is pull / pull zoals je zou verwachten op een grote aerobatic model en afhankelijk van hoe u wilt uw SU-29 vliegen, zal het een groot aantal centrales te wijten aan de enorme kap, reccomendations zijn voor 35cc ~ 45cc .... Ja, je weet waar dit naartoe gaat! Er is geen twijfel over mogelijk, dit model is zeer flexibel en heeft een enorm potentieel, van een briljante sport flyer om een ​​3D Beast!

specs:
Spanwijdte: 1980mm
Lengte: 1850mm
Flying Gewicht: 4800g ~ 5200g
4-kanaals / 6 Servo (niet inbegrepen)

inclusief:
alle Hardware
instructies

vereist:
Uw Eigen 6-kanaals TX / RX
6 x digitale MG High Torque Servo
35cc ~ 45cc Gas Engine
RX Battery
UBEC / Regulator

Product
Specifications

Aanvullende Informatie

  • Sku:
    SU-2935CF
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    9100.00
  • Lengte:
    1455.00
  • Breedte:
    390.00
  • Hoogte
    560.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Finished the build. This is a well made kit that goes together very well. Carbon wing spar is a good tight fit in the fuselage and wings, Stab spar required some fibreglass tape on the centre section to stop the slop. Some of the plywood components were broken or delaminated, easily fixed with some cyano. Covering is typical Chinese so it doesn't take much heat, wont shrink much and doesn't stick too well. That aside, the supplied hardware is good. In total this kit took me a week to assemble and I'm very particular about the building phase. The parts I've used are:- EMP 6364 230RPM/V 3200W Outrunner Motor, a mounting cage & 10mm Collet prop Adaptor. YEP 120A HV OPTO ESC & YEP 20A SBEC. 2 x Zippy 5S 4A 40C batteries in series. 4 x JR DS 8425 12kg Servos & 1 x BMS-860DMAX HS 24kg servo on rudder. I used a 'vertical rudder assist, 20-50cc' (C/F rudder tray & tiller). HD alloy servo arms 35mm long & Du-Bro monster 3mm Ball Links. XT90 series connector and battery connections. AeroStar 21"x10" electric wood prop. C/F 2.75" dia. spinner.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just to add to the above reviews, the ready to fly weight has come out at 6.6kg, with C of G set at 150mm from the wing LE at the fuselage. All control surfaces are double bevelled allowing 60 degree deflection in both directions, perfect for 3D. Depending on flight times I have the option to change batteries to larger capacity as there is plenty of room in the forward fuselage area.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was fortunate enough to pick this kit up on sale for $200.
Now that Aus Post don't deliver large kits, Hobby King is using Mainfreight as their carrier from the Australian warehouse. This kit cost me US $40 to ship it to Brisbane, Qld from the ACT, with a turnaround of one week. Kit arrived in good order. All the components shown above are in the kit, including C/F main & stab spars, C/F main gear & tail wheel assembly. Wheel pants and good size axils are supplied. Main wheels are a bit small. Most fixings are socket head. I intend to use a 3.2KW electric motor on 10S LiPo's spinning a 21" x 10" JXF wood prop. This is about the equivalent of a 40cc gas motor. Covering appears well done and is good quality. Fuselage is pretty heavy, hopefully that translates to robust. As usual HK is optimistic about flying weight, my guess is it will be more like 6.7kg ready to fly. (I hope so, as I don't want to get it heavy weight certified). So far it all looks pretty good. Definitely good value for what you get. I'll post more details once I finish it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ho acquistato questo modello e devo dire che visto il costo ho fatto un ottimo affare.A prima vista sembra un p fragile ma una volta ripassate tutte le incollature accessibili , ho rinforzato il castello motore con resina e fibra di vetro e sostituito le cerniere di fibra de kit con quelle a perno da 5 mm poi ho montato tutto il resto dell' Hardware che di buona qualit.Come motore ho montato il mio DA 50 con silenziatore tipo pitts e elica 23/8 servocomandi da 17 kg per alettoni e piani di coda e uno da 25 kg per la deriva.Visto il peso contenuto con il gas al 40pcntil modello rimane letteralmente "appeso" all'elica . Meno preciso il volo a coltello (ma questo dovuto al fatto che nel su 29 il piano di quota fuori asse rispetto alle ali) che comunque si pu sostenere facilmente con una piccola correzione con il comando di quota. La velocit di stallo molto bassa e comunque questo avviene sempre di "muso" e non d'ala. la livrea piuttosto semplice ma il modello bello da pilotare e anche da vedere in volo.Grazie hobby king!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am from Turkey,and I bought this model directly from warehouse( UK ).Quality is very very high.Covering is perfect.There is no any damage.And staff is very nice.Thank you
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.