Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Corona 2.4Ghz JR Module & Rx (V2 DSSS)

Generating Links

Corona 2.4Ghz JR Module & Rx (V2 DSSS)

Prijs:

Now save bespaar € 0,00 € 0,00

€ 30,69
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
RP8JII-2.4G
Geen verzendkosten? Klik hier meer leren!

Corona 2.4Ghz JR module vervangend systeem.
De Corona 2.4Ghz systeem vervangt de standaard JR module op de meeste JR PPM-systemen uitgerust met een FM-module.

Spec.

Grootte: 23mm * 37mm * 12mm
Voltage: 4.8 V - 6V
Bereik: meer dan 2100m
Werkende stroom: 30 MA
Gevoeligheid: 100dbm
Wachttijd: 22ms

Inbegrepen.
JR 2.4Ghz Module
Antenne
2.4Ghz Receiver

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Krzysztof | Geverifieerde koper

  • Overall
  • Quality
  • Value

Size :(

Feb 24, 2018

The module works well, but its size is too small and causes it to be too loose in 9xr turnigy pro, 9x is better but not perfectly like with frsky modules.

Udo | Geverifieerde koper

  • Overall
  • Quality
  • Value

Problems with installation in the Taranis transmitter

Dec 09, 2016

I bought this module for my Taranis transmitter. But it was not possible to plug it in. It did not fit. So I disassembled the module to find out why. Without the case it was possible to plug in the circuit board alone. The position of the board was a fraction of a mm to high. So I inserted the empty case of the module first, then the circuit board. That worked. With a little pushing and pressing I could also insert the cover. Now the activation and binding to the receiver was a breeze.

ChristianP | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 30, 2015

The range is not as good as with the stock turnigy 9x module and rx but more importantly, this glitches and loses signal in flight. It worked on the ground but the last two flights it resulted in crash due to radio failure. Luckily it is a cheap plane and only the nose wheel was damaged. Just wonder how they can sell this, according to rcmodelreviews there are other reports of this kind of behaviour, I am going for FrSky instead.

Denis:) | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2014

Very good module. I have tested it on the distance 2 km with stock antenna.
http://youtu.be/tT6RE_nutWM

Denis:) | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 03, 2014

Just received this one, looks good, but:
1) After binding procedure, TX module LED all time is RED, instead of Yellow a/p manual, range was not tested, but it works.
2) FAILSAFE not working properly - after power off the receiver, F/S setups erasing all the time!!! HOW TO PERFORM IT???? I am using 9XR and DJI Naza M lite.
So, better I will buy FrSky ...

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 20, 2014

Didnt check range but it works.

jose pop | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 15, 2013

Compr este modulo hace un ao y todava no lo he probado en vuelo, en tierra va bien, siempre que no este cerca de transmisiones de carbono o metlicas, lo he instalado en una turnigy 9x y encaja perfectamente.

Pavel Alexandrovich | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 24, 2013

Bought two of these. One has range about 30 meters, other just smoked, burned and died during first power on. Complete trash.

fastmurx | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 23, 2013

Fits into an old Graupner MC18, works perfect, no binding problems, just check whether you are in PCM modus, I did not check maximum distance because I just use it for parksize depron models, but 500m no problem at all.

Zeeshan Khan | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Sep 23, 2013

One of the best Module I use for Turnigy 9x 9ch Tx/Rx when i first buy Turnigy 9ch it never loose signal but after few crash i saw it loosing signal when i flight my scratch build and other brand they loose signal and crash after I search in HK I See that module and it fit perfect never loose signal. I comment very late i use more than 1 year plus and I also recommended to my friend and I already order for my frd Thx to Hobbyking for best product and low prices Value :)

Klantbestanden
Bind procedure Download [4]
Corona CR8D - manual.jpg Download [808]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!