Become a Dealer Blog
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Corona 538MG Digital Metal Gear Servo 7.0kg / 0.13sec / 53g

Generating Links

Corona 538MG Digital Metal Gear Servo 7.0kg / 0.13sec / 53g

Prijs:

Now save bespaar € 0,00 € 0,00

€ 9,40
Aantal stuks:
Verzonden vanaf:
  • USA
  • Global
Al gekocht
Toestand:
Op voorraad
SKU:
DS538MG
Geen verzendkosten? Klik hier meer leren!

Accessoires

Corona 538MG Digital Metal Gear Servo 7.0kg / 0.13sec / 53g
Model: DS538MG
Operating Voltage: 4.8V / 6.0V
Werkende stroom: 300mA / 400mA
Operating Speed: 0.14sec.60º / 0.13sec.60º
Stall Koppel: 6.5kg.cm / 7kg.cm
Grootte: 20x40x38.5mm (0,78 "x1.57" x1.51 ")
Gewicht: 53g
Dead Band: ≤3uSec
Operating Travel: 40º / ene kant pulse reizen 400US
Potentiometer: 5 slider / Indirect Drive
Kogellager: MR106
Gear: Metal
Connector draad: 215mm
Temperatuur bij gebruik: -20 tot + J 60J
  • Servo Torque ( kg) ( min . 0,01 kg ) 7.00
  • Servo Snelheid ( Sec / 60deg ) 0.13
  • Servo A ( mm ) 44.00
  • Servo B ( mm ) 40.00
  • Servo C ( mm ) 41.00
  • Servo D ( mm ) 20.00
  • Servo E ( mm ) 53.00
  • Servo F ( mm ) 27.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Heliwingo | Geverifieerde koper

  • Overall
  • Quality
  • Value

Geht so....

Jan 09, 2022

Großes Spiel in dem Getriebe....
Rückstellgenauigkeit lässt zu wünschen übrig....
Ware Könnte besser sein.....

Bart | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good servo

Dec 20, 2021

Works well on my old nitro car

Antonio | Geverifieerde koper

  • Overall
  • Quality
  • Value

Low price but doubts about quality and functioning.

Sep 19, 2021

I bought this servo for a 1/10 rc car but I am not satisfied.
Power and speed are as in the description but when it rotates slowly it shakes and after a few minutes of light use it warms up slightly.
I have at least 10 servos from 4 different brands that are more and less powerful or faster than this one but none of them shake or get hot after a few minutes.
Maybe it is faulty? Maybe it is not suitable for my receiver (Flysky FGr4S)? I don't know.

Bob | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good product at a very reasonable price.

May 14, 2021

I bought these to put in a Mick Reeves Gangster Lite as I wanted digital servos without paying the earth for them. I found these on the HK website and having used Corona rc products previously, decided to buy. These are well made powerful units with metal gearing and metal casing. Ideal for my purpose and fairly quiet in operation. Very pleased.

Dietsch | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good Quality Standard Size Servo

May 10, 2021

It does what it should. Never had an issue with it

Malik | Geverifieerde koper

  • Overall
  • Quality
  • Value

Top

Apr 25, 2021

Rien à ajouter ils font le job

TJ | Geverifieerde koper

  • Overall
  • Quality
  • Value

Quality of fittings provided leave doubts about reliabilty

Dec 29, 2020

1. The DS-538MG servos all appear to work OK. However, I have yet to use them in flight, so a comment about reliability would be premature. Control arms. Oh, that should not be plural. The single and solitary control arm supplied does not appear to be adequately strong enough or big enough for a 7kg servo, so I have resorted to more robust arms from my box of bits. Mounting hardware was totally inadequate and appears to have been sourced from Dubro's “Small Servo Mounting Hardware kit”, The brass ferrules only go half way through the mounting rubbers – this means that the puny little screws cannot be tightened properly, as all they do is squash the rubber vibration absorbers. The mounting screws are disturbingly small and unsuited to anchoring such a powerful servo. and were discarded. This meant another dive into the bits box was required, looking for more manly servo mounting screws.. What happened to the notion of providing “fit for purpose” control arms and mounting hardware like in the old days? This is all quite disappointing. I hope that the same penny pinching attitude does not apply to the insides of the servo itself as the longevity of my new 11kg aircraft is at stake. I may have made a bad call buying these servos.
2. The box: Purportedly shows views of the DS-538MG 7kg servo actual size. Not true. The diagrams are about 75% full size. But there's more; The box lid picture, a plan view of the servo, shows 2 mounting screws. Wrong. There are 4 mounting screws. Oh dear.

Peter | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good servo. Bad service

Jul 28, 2020

I bought five of these for a new model. Four seem very good - fast and powerful. One didn't work so I asked for a replacement. I am still waiting after several months. There is a delivery charge shown against the order, which I don't understand.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Jun 08, 2020

shlomi | Geverifieerde koper

  • Overall
  • Quality
  • Value

a

Mar 05, 2020

aaa

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Klantbestanden
Quality Box Download [1545]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!