New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Corona Synthesized Receiver 4Ch 35Mhz (v2)

Corona Synthesized Receiver 4Ch 35Mhz (v2)

Discontinued Product

Please continue searching for a similar product.
SKU:
RP4S1-35
WANT FREE SHIPPING? Click here to find out more!

Corona Synthesized Receiver 4Ch 35Mhz

Gooi uw kristallen, afscheid te nemen van glitches! De nieuwe Corona gesynthetiseerd ontvanger is hier!
Dit apparaat werkt met bestaande gesynthetiseerd zenders of kristal zenders. In feite zal de nauwkeurigheid van deze ontvanger de prestaties van alle 35MHz kristal zenders verbeteren.
De RP4S1 is de kleinste en lichtste gesynthetiseerd systeem vandaag beschikbaar zijn. Dit kleine formaat heeft geen invloed op de receptie de kwaliteit of de prestaties, omdat dit toestel heeft het grootste bereik beschikbaar vanaf elke Corona ontvanger plus een sensitiviteit groter dan 2uV. Tests hebben aangetoond dat het bereik meer dan 1 mijl zijn!

De nieuwe technologie in de gesynthetiseerde reeks Coron ontvangers zetten is echt uitstekend en zal zeker je wel twee keer na te denken over het upgraden naar een duurdere 2.4GHz.
Neem een ​​kijkje op Coronas website voor meer informatie;
http://www.corona-rc.com/index.php?option=com_content&task=view&id=26&Itemid=56

Spec.
Gewicht 0.14oz / 4.0g (zonder krimpfolie)
Gevoeligheid over 2.0ìV
Selectiviteit ± 8kHz op 65dB omlaag
Aantal kanalen 1-4
Filtering Dual draaide RF schakeling
Filtering Dual 4 pole keramisch filter
Filtering DSP filtering in MCU met milde algoritme
Shift polariteit Positief of negatief (automatische detectie)
Case krimpfolie
Operating Voltage 4.8V ~ 6.0VDC
Werkende stroom 11mA
Moduleer FM / PPM (puls positie modulatie)

* (Version2) unit is herzien met de volgende besluiten;
-Verhoogde Binding met verschillende branded radio's.
-Corrected Servo vergrendeling kwestie.
-Corrected Kanaal 2 jitter probleem bij gebruik van bepaalde zenders.

  • Sku RP4S1-35
  • Brand Corona
  • Capaciteit ( mAh ) -
  • Gewicht 59.0000
  • Lengte 66.00
  • Breedte 21.00
  • Hoogte 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Have some problem with my graupner MC-10. Lots of noise on each chanel. One time, it lost completely the signal (No signal). After a lot of try to set my frequency chanel, it found it. Now it's working fine but sometime, it's not perfect. Maybe not lucky and it's just a bad receptor. Don't know. I always flight with Corona Synthesized Receiver 6Ch 35Mhz (v2) and never had problem before.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have some problem with my graupner MC-10. Lots of noise on each chanel. One time, it lost completely the signal (No signal). After a lot of try to set my frequency chanel, it found it. Now it's working fine but sometime, it's not perfect. Maybe not lucky and it's just a bad receptor. Don't know. I always flight with Corona Synthesized Receiver 6Ch 35Mhz (v2) and never had problem before.

Fliege diesen Empfnger im Shockflyer.

Reichweite mehr als ausreichend, Leicht und gnstig.

Selbst das Binding ist ohne Probleme. Sehr zu empfehlen

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fliege diesen Empfnger im Shockflyer.

Reichweite mehr als ausreichend, Leicht und gnstig.

Selbst das Binding ist ohne Probleme. Sehr zu empfehlen

I bought two, they both didn't work with my 1980 Futaba Tx. I suspect a compatibility issue. A friend with a slightly younger Futaba had no problem with a same receiver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought two, they both didn't work with my 1980 Futaba Tx. I suspect a compatibility issue. A friend with a slightly younger Futaba had no problem with a same receiver.

So far it does what it is supposed to do, but I have one big problem, it doesn`t work with the HK i86A flight stabilisation board!
The servos start to stutter very fast in an unusual way, i hooked it up with a other receiver (JR) without problems.
Without the i86A it works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far it does what it is supposed to do, but I have one big problem, it doesn`t work with the HK i86A flight stabilisation board!
The servos start to stutter very fast in an unusual way, i hooked it up with a other receiver (JR) without problems.
Without the i86A it works fine.

This is a nice cheap and light PLL RX system that makes you postpone switchin to 2.4Ghz system. There is only one really bad thing about these RX systems: the antenna wire is really crappy. I've 4 of these and was forced to teplace the antenna on 2 of them. I'm planning to schedule replacement on the remaining 2 units.
To replace the antenn you will need to cut open the shrink tube and remove the heat glue that fizes the wire to the PSB.
Overall I'm pretty happy with these but the stock antenna makes them loos 1 crown !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a nice cheap and light PLL RX system that makes you postpone switchin to 2.4Ghz system. There is only one really bad thing about these RX systems: the antenna wire is really crappy. I've 4 of these and was forced to teplace the antenna on 2 of them. I'm planning to schedule replacement on the remaining 2 units.
To replace the antenn you will need to cut open the shrink tube and remove the heat glue that fizes the wire to the PSB.
Overall I'm pretty happy with these but the stock antenna makes them loos 1 crown !

A very goog reciver in the best price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A very goog reciver in the best price

Sehr guter Empfnger perfekt fr kleine Quadrocopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr guter Empfnger perfekt fr kleine Quadrocopter

Mulla toimineet puistokoneissa ihan mainiosti.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mulla toimineet puistokoneissa ihan mainiosti.

Very good receiver.Small and light.Hobby king you didi it!I used it to my push propler f15 foam.No problemm at all.Many thanks!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good receiver.Small and light.Hobby king you didi it!I used it to my push propler f15 foam.No problemm at all.Many thanks!

very good receiver, it works very good with Futaba T9ZHP (35.100)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good receiver, it works very good with Futaba T9ZHP (35.100)

Customer files
48461814X255302X13.pdf Download [170]
Corona-RP4S1-manual Download [170]
file:///home/larry/Documents/eWriter Pro stuff/Corona RP4S1 Receiver Manual (non-72).pdf Download [92]
Corona RP4S1 Receiver Manual.pdf Download [92]
Corona RP4S1 Receiver Manual.pdf Download [92]
Corona RP4S1 Receiver Manual.pdf Download [92]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!