New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Corona Synthesized Receiver 6Ch 72Mhz (v2)

Corona Synthesized Receiver 6Ch 72Mhz (v2)

Shipped From:
  • Global

Now save bewaar € 0,00 € 0,00

€ 16,14
Alert me
status:
Uit voorraad!
Gewicht:
59 g
SKU:
RP6S1-72
WANT FREE SHIPPING? Click here to find out more!

Corona Synthesized Receiver 6Ch 72Mhz

Gooi uw kristallen, afscheid te nemen van glitches! De nieuwe Corona gesynthetiseerd ontvanger is hier!
Dit apparaat werkt met bestaande gesynthetiseerd zenders of kristal zenders. In feite zal de nauwkeurigheid van deze ontvanger de prestaties van alle 72MHz kristal zenders verbeteren.

De nieuwe technologie in de gesynthetiseerde reeks Coron ontvangers zetten is echt uitstekend en zal zeker je wel twee keer na te denken over het upgraden naar een duurdere 2.4GHz.
Neem een ​​kijkje op Coronas website voor meer informatie;
http://www.corona-rc.com/index.php?option=com_content&task=view&id=26&Itemid=56

Spec.
Gevoeligheid over 2.0ìV
Selectiviteit ± 8kHz op 65dB omlaag
Aantal kanalen 1-6
Filtering DSP filtering in MCU met milde algoritme
Shift polariteit Positief of negatief (automatische detectie)
Case krimpfolie
Operating Voltage 4.8V ~ 6.0VDC
Werkende stroom 11mA
Moduleer FM / PPM (puls positie modulatie)

* (Version2) unit is herzien met de volgende besluiten;
-Verhoogde Binding met verschillende branded radio's.
-Corrected Servo vergrendeling kwestie.
-Corrected Kanaal 2 jitter probleem bij gebruik van bepaalde zenders.

* De afbeelding toont 'Dual conversie', op de verpakking. Het beeld is van de beta-versie, die de verkeerde verpakking hadden. We zullen beelden snel te werken.
  • Sku RP6S1-72
  • Brand Corona
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 59.00
  • Lengte 94.00
  • Breedte 23.00
  • Hoogte 74.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Works with Futaba T6XA , T6XH;
Doesnt work with Futaba 9Z 'cause its another FM system :(

Corona tech support couldn't assist me properly to make it work with 9z, but they said if i provided the brandwith of 9z they could make it. Of course i don't have an oscyloscope.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works with Futaba T6XA , T6XH;
Doesnt work with Futaba 9Z 'cause its another FM system :(

Corona tech support couldn't assist me properly to make it work with 9z, but they said if i provided the brandwith of 9z they could make it. Of course i don't have an oscyloscope.

I'm using this with a JR 8301 Range checks about 50 feet/15 meters further than the JR 7000. I have used both the single and double conversion 6ch RX the single conv. always does better on range checks. The double conv works fine (a little better than the JR 7000).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using this with a JR 8301 Range checks about 50 feet/15 meters further than the JR 7000. I have used both the single and double conversion 6ch RX the single conv. always does better on range checks. The double conv works fine (a little better than the JR 7000).

I have a test with Futaba 6ch, no problems so far

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have a test with Futaba 6ch, no problems so far

I have used most all of the corona synthesized receivers for about 2 years. the dual conversion receivers have better range

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used most all of the corona synthesized receivers for about 2 years. the dual conversion receivers have better range

Pros a) Light weight b) cost effective c) Scan ability
Cons a) like most FM and PPM which I used it on I found the servos 9g HXT900 twitchy b) pins a little too close

Additionally I found a problem with my rx I received July 10 2012 With my JR XP6102 radio. With battery attached and radio on the heli worked fine (meaning it recognized zero and full throttle) until I turned off the radio. Where it made the motor throttle up 100pcnt and after turning the radio back on it went back to 0pcnt throttle.

Sorry HK not happy with this RX at all for that reason alone. Luckily I had the motor away from the main gear at the time.

If you need more information please contact me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pros a) Light weight b) cost effective c) Scan ability
Cons a) like most FM and PPM which I used it on I found the servos 9g HXT900 twitchy b) pins a little too close

Additionally I found a problem with my rx I received July 10 2012 With my JR XP6102 radio. With battery attached and radio on the heli worked fine (meaning it recognized zero and full throttle) until I turned off the radio. Where it made the motor throttle up 100pcnt and after turning the radio back on it went back to 0pcnt throttle.

Sorry HK not happy with this RX at all for that reason alone. Luckily I had the motor away from the main gear at the time.

If you need more information please contact me.

eu comprei 2 deste Receptor Sintetizado Corona 6Ch 72Mhz [ ELE E MUITO BOM ] E FCIL DE ESTALAR , APENAS TROQUEI O RECEPTOR E APERTEI O BOTO DE SCANNER E PRONTO MEU AEROMODELO FICOU COMO ESTAVA ANTES DE PARAR DE FUNCIONAR , FOI MUITO FCIL VALEU MUITO A PENA A COMPRA ESTOU SATISFEITO , _

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

eu comprei 2 deste Receptor Sintetizado Corona 6Ch 72Mhz [ ELE E MUITO BOM ] E FCIL DE ESTALAR , APENAS TROQUEI O RECEPTOR E APERTEI O BOTO DE SCANNER E PRONTO MEU AEROMODELO FICOU COMO ESTAVA ANTES DE PARAR DE FUNCIONAR , FOI MUITO FCIL VALEU MUITO A PENA A COMPRA ESTOU SATISFEITO , _

Solo pesa 9.6 gramos. 100 cm de antena. A ver cuando le ponen una carcasa un poco mas dura.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Solo pesa 9.6 gramos. 100 cm de antena. A ver cuando le ponen una carcasa un poco mas dura.

I bought 6 of those Rx and used 3 of them , on my planes EDf and prop, some of th eRX are difficult to Bind with the Tx, but after all , all the 3 Rx installed on my planes worked fine at first then during the flights , it suddenly lost control , I was thinking that because of the batteries, but a friend found a blog regarding these Corona RX , people describing their problems that are so similar to all my crashes, (all 3 of my planes , lost one and repair few times the others and keep crashing until we found the blog discussing about th eCorona Rx working with Futaba 72 MHz Tx) I had to remove all those RX , I plan on returning them all.

Very frustrated : lost one EDF and destroy few prop planes , crashing pretty often. Spend time to fix more than to fly!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 6 of those Rx and used 3 of them , on my planes EDf and prop, some of th eRX are difficult to Bind with the Tx, but after all , all the 3 Rx installed on my planes worked fine at first then during the flights , it suddenly lost control , I was thinking that because of the batteries, but a friend found a blog regarding these Corona RX , people describing their problems that are so similar to all my crashes, (all 3 of my planes , lost one and repair few times the others and keep crashing until we found the blog discussing about th eCorona Rx working with Futaba 72 MHz Tx) I had to remove all those RX , I plan on returning them all.

Very frustrated : lost one EDF and destroy few prop planes , crashing pretty often. Spend time to fix more than to fly!!!!

Funciona muy bien, en mi futaba 6 EXA anda impecable...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Funciona muy bien, en mi futaba 6 EXA anda impecable...

I purchased 1 of these as part of my first HK order. Using with Futaba 6xa tx. Followed instructions and I had no trouble binding. servo response is smooth, no jitter. I will purchase more of these and I think I'm going to try some of the 9ch version. HobbyKing is King!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased 1 of these as part of my first HK order. Using with Futaba 6xa tx. Followed instructions and I had no trouble binding. servo response is smooth, no jitter. I will purchase more of these and I think I'm going to try some of the 9ch version. HobbyKing is King!!!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
No File Name Download [24]
seccion central Mini Yak 54 Download [24]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!