Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

D922MG Digital Metal Gear Servo 1.8kg / 12g / 0.07sec

Generating Links

D922MG Digital Metal Gear Servo 1.8kg / 12g / 0.07sec

Prijs:

Now save bespaar € 0,00 € 0,00

€ 11,37
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
D922MG
Geen verzendkosten? Klik hier meer leren!
Speciaal ontworpen voor helikopters en een snelle respons applications.Steel materiaal dat wordt gebruikt in de productie versnelling voor een betere intensiteit en verminderen uitgang afwijking na lange tijd use.It's van hoge kwaliteit motor maakt het mogelijk langer draaien op hoge snelheid. Compatibel met vele gyroscopen, zoals Futaba 401.601.
Model: D922MG
Operating Voltage: 4.5V / 6.0V
Werkende stroom: 50mA / 180mA
Idle Current: 5mA
Aanloopstroom: 600mA
Operating Speed: 0.09sec.60º / 0.07sec.60º
Stall Koppel: 1.6kg.cm / 1.8kg.cm
Grootte: 22.5x11.5x24.6mm
Gewicht: 12g
Dead Band: ≤3uSec
Gear: Metal
Connector draad: 210mm
Temperatuur bij gebruik: -20 ° C tot + 60 ° C
  • Servo Torque ( kg) ( min . 0,01 kg ) 1.80
  • Servo Snelheid ( Sec / 60deg ) 0.07
  • Servo A ( mm ) 31.00
  • Servo B ( mm ) 22.00
  • Servo C ( mm ) 28.00
  • Servo D ( mm ) 11.00
  • Servo E ( mm ) 32.00
  • Servo F ( mm ) 19.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Antonio | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 24, 2012

Amazing finally installed a servo on the tail of hk 250 that works, I was about to send to the trash hely

furunkel | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2012

For the price my absolute favourite! only issue is the bad soldering!! put evidentially some hot.glue at intern wiring and then you are safe. totally compares to 264mg savox!

D_Mac | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 04, 2012

I guess you need to give a good rating to have your review posted, anyways I tested the servo speed and it is .15 at 5v not even close to specs. I then ran the servo continuous and about a minute in it started cycling erratically, maybe I got a dud as it has good reviews but mine went in the trash and I won't be buying them again

2Doggs | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 22, 2012

I bought three of these to replace my 933's on a 450 Pro, after two were damaged in a crash.

The 933's were pretty good servos - smooth running with good centring, very little backlash in the gears and a perfect fit in the 450 Pro. On the downside, they seem to have fragile cases. I'd recommend using the HK servo arms, which are thin and quite flexible, and might offer some protection to the servo in a crash. You can use a back nut on the ball link bolt.

The main reason I decided to try the 922's was that the 933's were a bit slow - showing only 0.13s @ 5.9v on a servo tester.

I was therefore shocked to see the 922's show almost the same speed in the servo tester - 0.125s @ 5.9v.

Not only that, they also sound really harsh and rough, and have far more backlash in the gears than the 933's. I find it hard to believe they come from the same supplier.

In flight, on my 450 FBL, I had to reduce cyclic gains by 10 points from the value I'd used with the 933's, otherwise I would get a severe cyclic shake.

I also made the mistake of only ordering 3 servos - and the one I installed in the right aileron position oscillated around centre. After about 20 flights, it decided to shift it's neutral by about 30 degrees.

Overall, therefore, I think the 922's are nothing like as good as the 933's. I've since replaced them with Corona DS-929MG's. Although the Coronas have slighly more gear

D_Mac | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 20, 2012

I tested the servo and found it to be .15 on 5v nowhere near the stated speed, followed by running it continuous and it lasted about a minute before it started cycling erratically. Not worth sending back so it's in the trash.

Davyspeed | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 17, 2012

Ottimo servo, robusto e preciso, l'ho utilizzato per gli alettoni del mio Funcub Multiplex, dopo un forte crash in picchiata i servi non hanno subito alcun danno e fanno ancora un'ottimo lavoro :-)

Vassili80 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 15, 2012

Buon servo per il ciclico.

veloce e preciso e poi costa veramente poco.

Mi sa che ne compro ancora

blacknoise | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 10, 2012

There have been many discussions about this servo on major web forums. Mostly, people don't read the specs that this is not .09/sec at 5V and only .07 at 6V. Theory aside, this is an awesome cyclic servo for a 450 class as it has a smooth and precise movement. It is "OK" as a tail servo on a 250, but a faster servo would be better. Overall, great value and great servo.

Moustafa | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 05, 2012

it is fast servo and powerful but not as torque of DM 933

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 17, 2012

tima qualidade, uso em um HK 450, apesar de no fazer vos 3D ainda, para hovers perfeito. Segundo outros colegas, pode fazer 3D com estes, sem problemas.

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!