The Dancing Wings Hobby Stick-14T 3D aerobatic trainer is the perfect choice for intermediate and experienced RC pilots alike. It is based on the classic stick design and is quite capable of all the usual aerobatic maneuvers, plus with the right power train, it doubles up as the perfect 3D trainer. It has a very wide speed range, it is just as happy flying slowly as it is screaming about the sky. For added fun and enjoyment, the strip ailerons are split halfway making for outboard ailerons and inboard flaps. This allows for really slow or steep approach landings, and if the flaps are mixed in with your other controls it allows you to customize the handling to suit your own flying style.

The kit comes almost ready to fly and is constructed in balsa for a strong, lightweight, structure that has been factory-covered in an eye-catching, easy-to-see bright color scheme. It is also a very straightforward build and is easily assembled by those with very little experience. You will need to supply your own power system, servos, transmitter, and receiver, you will also require some tools and glue to complete the model.

Features:
• The perfect choice for the beginner to RC flying
• Constructed of strong, lightweight balsa
• Tricycle landing gear for easy take-offs and landings
• Airframe is factory-covered in an eye-catching color scheme
• Large, flat-bottom wing wing with dihedral for stability and slow flight
• Suitable for either an electric or GP setup
• Supplied with a complete hardware kit

Specs:
Type: Dancing Wings Hobby (ARF) Vogee-16 EP/GP High-Wing Trainer
Wingspan: 1400mm (55")
Length: 1187mm (47")
Flying Weight (Approx): 1.5kg (3.3lb)
Building Level: ARF (Almost Ready to Fly) kit, does require assembly
Construction: Balsa wood with factory-applied covering

Included:
1 x Fuselage
1 x Pair of wings
1 x Horizontal stab
1 x Vertical stab/rudder
1 x Main landing gear
1 x Pair of wheels
1 x Pair of wheel pants
1 x Steerable tailwheel assembly
1 x Carbon wing tube
1 x Pushrod set
1 x Complete hardware pack

Required:
Motor: 2815~3520-900~1000KV brushless outrunner
ESC: 40~60A brushless
Propeller: 12x6" or similar
Battery: 4S 2200~2800mAh LiPo
Servos: 2 x 17g and 2 x 37g
Radio: 5ch or more transmitter and receiver
Tools: Modelling knife, pliers, metal ruler, pin-vice, drills, etc
Glue: 20min epoxy or white glue, medium CA, thread-lock