Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Diamond DA-40 Sport Schaal Vliegtuig 1320mm (ARF)

Diamond DA-40 Sport Schaal Vliegtuig 1320mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
2100 g
SKU:
234000001-0

Combine

essential items and
esc
battery
servo
motor
acc
Product
Omschrijving

De DA-40 is een vier-zitplaats, low-wing cantilever eendekker, die een vaste driewieler landingsgestel en een T-staart heeft. de eerste plaats bedoeld als trainer vliegtuigen van de DA-40 staat bekend om zijn goedaardige handling bij lage snelheden en de korte opstijgen en landen kenmerken. De DA-40 met succes zijn eerste vlucht op 5 november 1997 afgerond.

Deze briljante sport schaalmodel is ideaal voor de beginnende en ervaren piloten gelijk. Met zijn hoge niveau van de schaal detail, zullen de meeste niet beseffen dat het een Foamie op het eerste gezicht! met zijn bestuurbare neuswiel, gegoten wielkap, scharnierende cockpit luifel, piloot en passagiersstoel, dit model heeft het allemaal! Gemaakt van ultra-duurzame EPO schuim met lichtgewicht triplex mallen, kan dit model gemakkelijk omgaan met minder dan perfect landingen zonder te doen om veel schade, dit maakt het zeer geschikt voor minder ervaren piloten op zoek naar een sport schaalmodel te vliegen.

De DA-40 vliegtuigen aankomt als een bijna klaar om te vliegen en vereist 4 servo's (3x9g, 1x5g), 30A ESC, 28mm 1000-1500kv borstelloze outrunner motor, 11.1v 2200mAh 20 ~ 30C lipo en je eigen zender en ontvanger. De hardware pakket bevat alle armaturen en fittingen, samen met een buis van foam veilig lijm. Alle servo verlengings- / Y-kabels zijn vooraf geïnstalleerd, zodat er geen behoefte aan essentiële veranderingen zullen bij het monteren van vliegtuigrompen.

Kenmerken:
• Ultra duurzaam EPO schuim en licht van gewicht multiplex constructie
• Grote schaal functies en detail
• Tricycle stijl onderstel
• Bestuurbare neuswiel en gegoten wielkappen
• Afneembare wing
• Eenvoudig te monteren
• Vooraf geïnstalleerde servo verlengsnoeren / Y-leads
• Uitrusting / fittingen en schuim veilig lijm opgenomen

specs:
Spanwijdte: 1320mm
Lengte: 930mm
Gewicht: 570g (alleen casco)
ESC: 30A borstelloze
Motor: 28mm 1000 ~ 1500kv borstelloze outrunner
Servo's: 3 x 9g, 1 x 5g micro servo's

vereist:
30A brushless ESC
28mm 1000 ~ 1500kv borstelloze outrunner
3 x 9g, 1 x 5g micro servo's
11.1v 2200mAh 20 ~ 30C lipo batterij
4 ~ 6 kanaals zender en ontvanger

Product
Specifications

Aanvullende Informatie

  • Sku:
    234000001-0
  • Brand:
    Nee
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    2100.00
  • Lengte:
    900.00
  • Breedte:
    210.00
  • Hoogte
    210.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Received Airplane missing right side wheel spats. This was done deliberately because the whole landing gear was packed and taped in protective foam, so it was a deliberately sent out that way.
Plane flys great, I have 4S funfighter motor installed with 8X3.8 prop and 1000mah 4s battery. No trim issues. Stall is gentle and landing easy. But will will go into a stall spin if your don't apply power and the spin is bad!
I added flaps and the make landings and take offs very nice.
4 crowns only because of bad Quality Control, otherwise this is a 5 overall.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Plane arrived no damages to foam, better quality than I expected, Huge cabin area! it looks like a tadpole *-) seems all the pieces are there, after assembly and maiden I will add to this review, but looks better than the pictures displayed of it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello friends
After hitting the plane you report in detail
1 there is a defect in the front of the plane must provide the engine forward slightly (see attachments)
2 front wheel change the direction should be installed well
3 position battery and control is not clear from the factory and is clear in the catalog (see attachments) cant fined CG
4 landing too fast must activate flaps to reduce speed when landing
In general plane is beautiful and graceful and gorgeous Air Sports

Use the plane in 2200ma
prop 8x 4.4 or 8x6 good
motor 2826 1400 or 1100
Speed 30a
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this model not to long ago.
it's a great plane to fly and a great looker
too. i never used the decals so i wouldn't
know if they are any good. I painted it myself.
tinted the windows, and painted the bottom black
and the top blue. my setup was a park 450 1200kv,
plush 30a ESC, orange Rx, Parkzone, Flyzone, and E-Flite
servos, MA 3 Blade 9x7 prop and 1.75 3 blade spinner.
flies great. flaps were very easy to add. fun plane to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
So far this is a build review only. First impressions on opening box were good. Well packed and arrived safely.

On sorting out parts discovered one wing bolt was not threaded, one nut missing from control connector and the heads on the screws for attaching motor were too large to fit next to motor body.

Had to add 2 x 3mm ply in front of firewall to move motor forward so prop cleared cowl.

Added small length of tubing for nose wheel pushrod to run in to stop flexing.

Plane went together reasonably easy. Spent time on positioning r/x, esc and battery.

Biggest hassle was applying the decals. Decals for wings were too large. Trouble getting edges to stay down especially where cuts were made for control surfaces. One of the fuselage decals came apart when applying it. Printed area came away from the adhesive back. The cream/gray decal for over canopy was a disaster. Discarded that piece.

Motor installed is a Turnigy 2217/1050, 9x7 3 blade prop., 30 amp Plush esc, 2 x TS9 servos, 2 HXT 900 and 1 Turnigy 1600 for elevator. Orange r/x and model balanced as indicated with a Zippy Compact 1800 3S, 25C lipo. Will submit further report after test flight.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo
motor
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.