Diatone ET 200 Class Micro Drone

• Overall
• Quality
• Value

Customer Rated

Jul 10, 2016

Great frame, horrible PDB and some stock parts. Once upgraded, this thing is a beast.

Seems to flip better than roll, but that is probably due to the back arms.

Space can be limited, so 35mm spacers will go a long way to allowing you to mount inside of the cage. 8mm screws will also hold onto the spacers from the bottom better than the 6mm ones. I found i was losing screws because it couldn't grab the spacer (with the stock pdb)

The stock PDB is trash, the 5v is coming from voltage regulators. These are just heat pumps that can only do .5a out. The spacers they give you will make it impossible to screw it all down with 6mm screws. I thought I had a short in my frame and kept on burning myself when holding it. Turned out to be the regulators, they are right at the edge too.

The PDB does give it a bit more stiffness. I just stopped using it, so i'm not sure how much that will affect overall strength, but once reassembled with the top, it feels just as solid.

Has taken a fair amount of hit as well with no damage, a plus is the ability to get spare arms.

Motor Mix:
cmix 1 1 -0.715 0.701 -1
cmix 2 1 -1 -0.701 1
cmix 3 1 0.715 0.701 1
cmix 4 1 1 -0.701 -1

• Overall
• Quality
• Value

Customer Rated

Dec 21, 2015

Nice Frame, one hole missing on top plate but it is easy to drill with a high speed metal drill and a piece of wood under the plate. Bolts are long enough if you use vinyl electrical tape instead of the spacers to isolate your distribution board from carbon frame. If you use the spacers you need longer bolts.

• Overall
• Quality
• Value

Customer Rated

Sep 21, 2015

Really neat little frame. Although one hole is missing on the the top plate and the provided screws aren't long enough, luckily had some spares. Also it says you can fit 2204 motors but you can't without drilling put bigger holes both for the screws and in the center. So anything over 1806 would be too big for this frame. I also used taller standoffs in order to fit everything. But I managed to do so and this is by far my favorite quad. Insanely fast and incredibly nimble.

Multistar 2204 motors
Afro 12 amp esc
Cc3d atom
Lemon rx
Eachine 200mw fpv combo
5 in bullnose props