New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Diatone ET 200 Class Micro Drone

Diatone ET 200 Class Micro Drone

Discontinued Product

Please continue searching for a similar product.
Gewicht:
80 g
SKU:
9366000102-0
WANT FREE SHIPPING? Click here to find out more!

De Diatone ET 200 is een ander aanbod van deze hoogwaardige fabrikant van micro grootte drone. Als u op zoek bent naar een micro-sized multirotor dat is iets groter dan de 150 en 180 en zal u toelaten om iets grotere motoren en propellers gebruik vervolgens de Diatone ET 200 is de juiste keuze.

Het is groot genoeg om een ​​standaard brushless setup en trouwens ook kan vervoeren boveneinde FPV versnelling maar ook klein genoeg rond te vliegen binnen en buiten en kan vliegen door de spleten grotere machines passen niet door. Het lage gewicht (39g kader only) betekent dat het de stoten te nemen en slaat de grotere machines kan niet zonder te breken te nemen.

Het frame is ontworpen om zowel slim en esthetisch te zijn, het heeft 30mm bevestigingsgaten boven- en onderkant, zodat je alle standaard hardware kan monteren. Er is volop ruimte, zowel binnen als op de top voor apparatuur die beschikbaar is. De cut-outs zijn strategisch geplaatst om de FPV onderdelen met inbegrip van de camera en de antenne steel tegemoet te komen.

Geleverd is de bekendheid Diatone stroomverdeling board met 5V stepdown wat zorgt voor een zeer nette installatie en tevens voorzien zijn van aluminium impasse's, nylon bevestigingsmiddelen, moeren, pakkingen en bevestigingsschroeven.

Kenmerken:
• Ultra sterke carbon fiber constructie
• 3K carbon fiber 2mm dikke armen
• 3K carbon fiber 1mm dik centrum platen
• Standard 30mm boutgaten voor de vlucht controller etc
• 25mm afstand tussen boven- en onderplaten
• Geïntegreerde macht distibution board (met 5V stepdown)
• Suits motoren met 12 ~ 19mm montagegat centra
• Aluminium impasse's
• Lichtgewicht (39g alleen montuur)

specs:
Materiaal: Carbon fiber
Frame Breedte: 190 mm ​​(voor motorische centra)
Frame Breedte: 135mm (achter motorische centra)
Frame Lengte: 140mm (motorische centra)
Frame Hoogte: 32mm
Gewicht: 39g (alleen montuur)
Motor montagegaten: 12 ~ 19mm

Vereiste:
4 x 1306 ~ 2204 borstelloze motoren
4 x 4 ~ 5ins propellers
4 x 6 ~ 12A regelaars
1 x Flight controller
1 x 800 ~ 1200mAh 2 ~ 3S LiPoly batterij
4ch radiosysteem

  • Sku 9366000102-0
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 80.00
  • Lengte 130.00
  • Breedte 30.00
  • Hoogte 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great frame, horrible PDB and some stock parts. Once upgraded, this thing is a beast.

Seems to flip better than roll, but that is probably due to the back arms.

Space can be limited, so 35mm spacers will go a long way to allowing you to mount inside of the cage. 8mm screws will also hold onto the spacers from the bottom better than the 6mm ones. I found i was losing screws because it couldn't grab the spacer (with the stock pdb)

The stock PDB is trash, the 5v is coming from voltage regulators. These are just heat pumps that can only do .5a out. The spacers they give you will make it impossible to screw it all down with 6mm screws. I thought I had a short in my frame and kept on burning myself when holding it. Turned out to be the regulators, they are right at the edge too.

The PDB does give it a bit more stiffness. I just stopped using it, so i'm not sure how much that will affect overall strength, but once reassembled with the top, it feels just as solid.

Has taken a fair amount of hit as well with no damage, a plus is the ability to get spare arms.

Motor Mix:
cmix 1 1 -0.715 0.701 -1
cmix 2 1 -1 -0.701 1
cmix 3 1 0.715 0.701 1
cmix 4 1 1 -0.701 -1

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great frame, horrible PDB and some stock parts. Once upgraded, this thing is a beast.

Seems to flip better than roll, but that is probably due to the back arms.

Space can be limited, so 35mm spacers will go a long way to allowing you to mount inside of the cage. 8mm screws will also hold onto the spacers from the bottom better than the 6mm ones. I found i was losing screws because it couldn't grab the spacer (with the stock pdb)

The stock PDB is trash, the 5v is coming from voltage regulators. These are just heat pumps that can only do .5a out. The spacers they give you will make it impossible to screw it all down with 6mm screws. I thought I had a short in my frame and kept on burning myself when holding it. Turned out to be the regulators, they are right at the edge too.

The PDB does give it a bit more stiffness. I just stopped using it, so i'm not sure how much that will affect overall strength, but once reassembled with the top, it feels just as solid.

Has taken a fair amount of hit as well with no damage, a plus is the ability to get spare arms.

Motor Mix:
cmix 1 1 -0.715 0.701 -1
cmix 2 1 -1 -0.701 1
cmix 3 1 0.715 0.701 1
cmix 4 1 1 -0.701 -1

Nice Frame, one hole missing on top plate but it is easy to drill with a high speed metal drill and a piece of wood under the plate. Bolts are long enough if you use vinyl electrical tape instead of the spacers to isolate your distribution board from carbon frame. If you use the spacers you need longer bolts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice Frame, one hole missing on top plate but it is easy to drill with a high speed metal drill and a piece of wood under the plate. Bolts are long enough if you use vinyl electrical tape instead of the spacers to isolate your distribution board from carbon frame. If you use the spacers you need longer bolts.

Really neat little frame. Although one hole is missing on the the top plate and the provided screws aren't long enough, luckily had some spares. Also it says you can fit 2204 motors but you can't without drilling put bigger holes both for the screws and in the center. So anything over 1806 would be too big for this frame. I also used taller standoffs in order to fit everything. But I managed to do so and this is by far my favorite quad. Insanely fast and incredibly nimble.

Multistar 2204 motors
Afro 12 amp esc
Cc3d atom
Lemon rx
Eachine 200mw fpv combo
5 in bullnose props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really neat little frame. Although one hole is missing on the the top plate and the provided screws aren't long enough, luckily had some spares. Also it says you can fit 2204 motors but you can't without drilling put bigger holes both for the screws and in the center. So anything over 1806 would be too big for this frame. I also used taller standoffs in order to fit everything. But I managed to do so and this is by far my favorite quad. Insanely fast and incredibly nimble.

Multistar 2204 motors
Afro 12 amp esc
Cc3d atom
Lemon rx
Eachine 200mw fpv combo
5 in bullnose props

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save