-
Product
Omschrijving -
Introductie van onze Doctor Mad Thrust High performance EDF motor serie. Onze dokter heeft druk weg te werken achter de schermen om te komen met deze MAD reeks van EDF motoren ....... Macht? - Niet ontbreken met deze!
Dit is 3000kv 2-4s versie 70mm EDF units aan te passen, met maar liefst 1300watt vermogen deze 29mm inrunner is niet te snuffelde aan!
De Dr. Mad Thrust aanbod van EDF inrunners zijn gebouwd met slechts één ding in het achterhoofd - maximale EDF prestatie! Ze zijn voorzien van hoge temperatuur statorwikkelingen, hoge kwaliteit lagers, zijn precisie in evenwicht gehouden voor de goede werking en zijn van een 4-polige ontwerp.Over-ontworpen om de stress en spanning van high performance EDF units en een hoog 'C' beoordeeld packs te behandelen. De arts heeft hard aan het werk geweest om u een reeks van bullet proof, extreme prestaties EDF motoren die zijn gebouwd om lang mee te nemen.
Hier krijg je een Doctor Mad stuwkracht huis voor uw EDF!
specs:
RPM / V: 3000kv
Voltage: 2-4s
Max stroom: 85A
Max Power: 1300 Watt
Suggereerde Rpm Operating Range.
High Blade Count: 41.000 rpm
Lage Blade Count: 46.000 rpm
Pole: 4
Diameter: 29mm
Voorzijde montagegaten Afstand: 19mm
Shaft Diameter: 4mm
Shaft Lengte: 10mm
Voorzijde mount Thread Grootte: M3
Plug Type: Bullet-Connector 3.5mm
Gewicht: 194g -
Product
Specifications -
Aanvullende Informatie
-
Sku:
107000115
-
Brand:
Nee
-
Gewicht ( g)
235.00
-
Lengte
110.00
-
Breedte:
40.00
-
Hoogte:
40.00
-
Kv ( tpm / v )
3000.00
-
Max Currents (A )
85.00
-
Vermogen ( W):
1300.00
-
Lengte B ( mm ):
68.00
-
Kan Lengte D ( mm )
68.00
-
Max Voltage ( V )
15.00
-
Shaft A ( mm ):
4.00
-
Unit Weight (g):
194
-
C Diameter ( mm )
29.00
-
Totale lengte E ( mm )
85.00
-
Resistance ( mh ):
0.00
-
Sku:
-
Community
Discussions -
-
Rate&
Review -
I have put the Dr Mad Thrust 2950 3000kv in my Aquacraft Supervee 27 using S3 Lipo and 50mm 3 blade aluminium prop. And WOW the boat is almost flying in stead of floating in the water. It's a High Speed Supervee Monster now. Without any extra cooling for the motor. It stayed nicely cool.Looks beefy. long motor and a bit larger than a 28mm more like 30mm can so make sure you have a motor mount that will fitGood motor. Can handle a lot of power. Pushed to 120amps in edf on 4s. Bearings are NMB and remained smooth for quite a while compared to the super cheap stuff allthough this one is quite cheap also. Still works after 50-100 flights but the sound is not that great anymore. A bit on the heavy side.A power beast! I am going to use it on my Radjet 800 for extreme speed setup :-)If u want more speed on your funjet ultra! Buy it!parece ir bien pero lo tengo que comprobar con una helice mas grandeRan the motor up today on my eflite tester and the results were 759watts at 49amps with TURNIGY Nanotech 2200mah 4s packs with std 45amp VAMPIRE ESC and FANFitted up to my HK Durafly VAMPIRE... bolted straight in no mods!!! Test flight tomorrow.as with everything HK sells, the measurements are incorrect. The shaft is 4mm. NOT 3.175. Chinese cant seem to measure worth a dang.Vamos a probar que tal resultado da con una wemotec minifan evo de 70 mm
-
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesNo File Name download now [1335kb]