Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren

DYS BE1806 2300KV Combo set met 16amp Opto Regelaars X 4

DYS BE1806 2300KV Combo set met 16amp Opto Regelaars X 4

Now save bewaar € 21,23 € 21,23

Special Price € 48,10 € 48,10

You save bewaar € 21,23 € 21,23

Was  € 69,33

Uit voorraad!
Stock:
OUT OF STOCK
Gewicht:
240 g
SKU:
206000049-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

De perfecte combinatie voor uw 250 multi-rotor project van deze kwaliteit fabrikant van multi-rotor componenten. In dit combo set ontvangt u 4 x DYS BE1806 2300KV motoren, 4 x DYS 16amp BLheli Opto snelheid controllers, de prop chauffeurs en bevestigingsbouten.

DYS BE1806 2300KV Motor Specs:
Rpm / V: 2300KV
Voltage: 2 ~ 3S (7,4 V ~ 11,1 V)
Max Current: 8amps
Max Watts: 85W
Shaft Diameter: 2mm
ESC: 10 ~ 16amp
Montagegaten: M2 x 12 / 16mm
Prop Grootte: 5 x 3-7 x 2.4ins

Testgegevens:
7.4V met 6 x 2ins prop, 17060rpm / 6.5A / 48.1W
7.4V met 7 x 2.4ins prop, 17060rpm / 7.6 bis / 56.2W
11.1V met 5 x 3ins prop, 25590rpm / 6.5A / 72.2W
11.1V met 6 x 2ins prop, 25590rpm / 7.6 bis / 84.4W

Kenmerken van de DYS 16amp ESC:
• Speciaal ontworpen voor multi-rotoren
• Twisted servo-kabel om storing te verminderen
• Snelle gasrespons
• Lage weerstand MOSFET
• Klein en lichtgewicht
• Dikkere PCB voor betere warmte dissapation
• Maximale refresh frequentie tot 500Hz gas signaal, compatibel met alle luchtverkeersleiders
• High performance condensator filter

Specs van DYS 16amp ESC:
Model: 16A Micro Opto multi-rotor ESC
Input Voltage: 2 ~ 4S (7,4 ~ 14,8 V)
Continu Stroom: 16 ampère
Burst Actueel: 18 ampère
Signaal Frequentie: 20-500Hz
Output PWM Frequentie: 18KHz
Toepassing: compatibel met SimonK & BLheli firmware
BEC: Nee BEC, alleen opto
Afmetingen: 23 x 12 x 4,5 mm
Gewicht: 7,6 g

inbegrepen:
4 x DYS BE1806 2300KV borstelloze motoren
4 x DYS 16amp Opto snelheid conrollers
4 x Prop adapters
4 x Sets van schroeven

Product
Specifications

Aanvullende Informatie

  • Sku:
    206000049-0
  • Brand:
    Nvt
  • Gewicht ( g)
    240.00
  • Lengte
    160.00
  • Breedte:
    60.00
  • Hoogte:
    100.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Bought them a while when there was an offer for 40$. Today I replaces my 2206 Multistar Baby Beast 2 with them because they where broken after some crashes. I was leery if the can replace them and lift my 600gr "racer". I have an 280 ZMR clone frame and 5040 props with 2200mah 3s lipo. But now I'm amazed. This little motors lift my quad better than my old ones. I did not use the ESCs yet, but my old Afro 12A work great with the motors.
The only downside the prop mounts are 4 time CW and not 2CW and 2CCW which would be great for quadcopter usage. Luckily my old ones fit the motors.
Quality
Value
Overall
Quality
Value
Overall
Non ho ancora provato gli esc in dotazione a questo pacchetto, ma credo che non abbino alcun problema. Per quanto riguarda i motori posso dire per esperienza perche' gia acquistati in precedenza, che sono ottimi per frame 250. Complessivamente il pacchetto acquistato in offerta e' molto vantaggioso
Quality
Value
Overall
Quality
Value
Overall
Perfect for an all in one 250 or similar sized project. I have bought 3 sets and have had no issues. Requires some soldering. But I custom soldered all the ESCs to custom fit my frame. Wrote this review to counteract the previous customer's unfair 1star review just because they had some pilot error.
Quality
Value
Overall
Quality
Value
Overall
Great combo, bought two sets, updated the ESC and flys like ad dream. Use them with Jiyi P2 and after firmware update of Jiyi and ESC fuly compatible
Quality
Value
Overall
Quality
Value
Overall
This setup is quality all the way. I am running 6x3 props with a 3s 2200mAh lipo and it powers my quad no problem
Quality
Value
Overall
Quality
Value
Overall
Would of be nice if there were bullet connectors for the ESC's in the box.
Only blank cable here but bullet pin's on the motors.

Will get back when i get everything flying ;)

Quality
Value
Overall
Quality
Value
Overall
Bought this set for my first FPV Quadcopter. Just got them together and put on and they work so far as intended. As a beginner, it is kind of nice ESC and motor are correctly sized - Later you can always upgrade motorne or ESC. The more advanced users, I believe not choose these but as a beginner you have to start somewhere :)
Quality
Value
Overall
Quality
Value
Overall
Great little motor and esc combo. I recommend purchasing the DYS ESC USB Linker ESC Programmer as well. It made getting all of the esc's set the same very easy. Mine were all set differently when I got them. I put these on a H King Color 250 Class frame and a Nano Tech 1300 mah 3s with a KK 2.1.5 controller. Flies great. Just make sure you get the KK mini. Had to carve the controller board a bit to make it fit.
Quality
Value
Overall
Quality
Value
Overall
Great combo !
At this price, i don't think you can get any better.
Perfect for your first Quadcopter
Quality
Value
Overall
Quality
Value
Overall
Got this combo its great put a amp metre on the quad and its saying 25A at full on 4s on 5/3 3blade props. And the esc are cold the motors are just warm if u use larger props the amps will go up. Havant flown it much so i will see if it lasts
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
On H King color 250 frame download now [258kb]

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.