E-Fly 100C 6Ch Flight System w / ESC
Met Vliegtuig, V-staart, CCPM heli en de standaard heli mode bewijst dit radiosysteem vrij krachtig te zijn en maakt het mogelijk om gebruikt te worden met grootschalige helis, één vleugel flaperon vliegtuigen met een mixer en ook jets of grote vlakken die meerdere vereisen nodig kanalen voor trekt etc.
Dit systeem wordt geleverd met de volgende;
3 parkflyer servo
30A Speed Controller
Signal vermogen: <750mW
Werken Actueel: <250mA
Voltage Indicator: LCD
Flying Mode: A / V / H / C
Werken Frequentie: 72MHz
Dit product is volledig FCC en voldoet aan CE.
Software voor simulator kan hier worden gevonden;
Capaciteit ( mAh )
Gewicht ( g)
bought one of these complete radio kits, cant go wrong for its price tag, everything works just fine, no glitches no twitching, the servos it came with are really nice, system includes recvr, servos, battery, and charger!! great productOrder one of this and I was amazed at how good the quality is .Ordered extra RX and I am using them in my Heli.Hello Robert,
How did you change the throttle to the left stick?
It seems that the radio works really good! And the price is amazing!
I remade its transmitter in mode 2 for 1 hour. In my opinion it is not difficult.Thanks Zavadovskyy Vitaliy for replying on info of changing to Mode 2.
I mis-typed when I posted the question. I am interested to change it to Mode 2.
Good to know that it is not difficult to do and I will look a round the web for the pictures of the modification.
Thanks again.This is great radio. But now package are some different then on the picture and like in comments. First, I received this radio with the charger device on an ~220v (not 120 as in comments). Also there was 4 9g servo (!not 3 as on the picture) - this is very good :) Also in package was additional 1 pair of Tx and Rx crystals for 72.150 MHz. Also in transmitter was installed Tx 72.810 MHz but in receiver was 72.150 MHz. So in transmitter crystal was replaced to 72.150 MHz, and now I have additional Tx 72.810 and Rx 72.150MHz - don't know it should be like that or it was mistake on factory )
Anyway this is very good radio for this price.
Reply to previous post: It is already in Mode 1!!! If you want change it to Mode 2 - it is possible. The spring load mechanism of the vertical slide of the right stick can be removed and installed to the left stick (because their mechanisms are identical), and then you should switch wires for channels. Somewhere in internet i saw picture how to do it.First, I would be happy to rewrite the instruction manual in better English, for better communication.
Regarding mode 2, I wish I had been able to order it in mode 2, but now would like instructions for converting it from mode 1 to mode 2.
Otherwise, although I haven't gotten started using it, I'm impressed with the product and look forward to doing so.
Dear RCmodel, Yes this radio is working fine with corona reciever 4 channels, the one you questioned. I'm ordering the 6 channels from Corona, cant wait for the shipment. RegardsThe excellent system, inexpensive and is enough high quality...
Has anybody try to open up the TX box and modify it to Mode 1? Can the left stick and right stick be switched around? Or can the spring load mechanism of the veritcal slide of the right stick be removed and install to the left stick?