New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Easy 3D Balsa Glow / EP 1280mm (ARF)

Easy 3D Balsa Glow / EP 1280mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
Gewicht:
3910 g
SKU:
437000007
WANT FREE SHIPPING? Click here to find out more!

De Easy 3D is een geweldige formaat club aerobatic model van de traditionele stijl die is ontworpen om veel plezier evenals goedkope en makkelijk te bouwen.

De Easy 3D is licht van gewicht, maar is ontworpen om een ​​beetje misbruik te behandelen! Bijvoorbeeld, de legering onderstel is uniek rubber gemonteerd, de bestuurbare staart wiel maakt gebruik van een aanzienlijke roer & romp mount, alle drie de wielen te gebruiken juiste rubber banden, de controle hoorns zijn de heavy duty type en de kap is van een moeilijke GF constructie . Ook opgenomen met de Easy 3D is mounts voor zowel gloed en EP, brandstoftank, motorsteun en spinner, waardoor het veel waar voor uw geld!

Deze grote presterende "club" aerobatic model is ook goedkoop om te bouwen, zal standaard servo's worden meer dan tot aan het werk voor iedereen, maar de meest hardcore 3D-piloten en er is geen twijfel over het vermogen van deze mooi geprijsd model, het is briljant low speed performance gecombineerd met het is makkelijk om te vliegen natuur maken van de Easy 3D een geweldige eerste 3D-model of op lage prijzen, een geweldige leuke aerobatic model!

Kenmerken:
• Lichtgewicht Balsa / Ply Bouw
• Felgekleurde & Traditionele See Through Covering, Groot voor Orientation
• Snelle en eenvoudige Build
• Rubber gemonteerd U / C
• Uitgebreide hardware inbegrepen
• Grote Eerste 3D-Plane
• Mounts voor Ofwel Glow of EP
• slijtvast RubberBanden All Round
• Plug In Wings voor gemakkelijk transport
• Grote, Quick Release Canopy

specs:
Spanwijdte: 1280mm
Wing Gebied: 45dm2
Lengte: 1190mm
Gewicht: 1900g ~ 1950g

vereist:
Uw eigen 6-kanaals TX / RX
0.46 Glow Motor / 42mm Brushless Motor Outrunner rond 800w (3D)
5 x Standard Servo (4 x voor het EP versie)
60A ESC (EP Version)
RX Battery (Lipo of NiMH)
UBEC (voor EP of Lipo RX batterij)
4s Lipo 2700mAh ~ 3300mAh (EP Version)

  • Sku 437000007
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 3910.00
  • Lengte 940.00
  • Breedte 210.00
  • Hoogte 430.00
  • Easy 3D Balsa Glow/EP
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very will made plane putting this together took no time at all. I have put a OS40 glow using a 11x4 prop plenty of thrust good for prop hanging and 15pcnt nitro. Total weight of around 1.8 kg. If they restock may buy a second.

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the medium is set, the engine cowling is low in fiber quality and used without paint peels. About the price, shipping to Brazil is expensive which makes the product benefit with average cost. The Construction Builder wood / balsa looks good.

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very good value 3D plane. It is personally my first plane, and it was fairly straight forward to build. Very light weight, loads of power with a .46 nitro and a 10x7 prop. Elevator snapped on me under steep descent, but that was probably my fault for over-speed, managed to land with minimal damage which was very impressive as half went completely and the half with the control horn was barely in place. (Landed hard taking wheel mounts off and breaking engine mount, easily replaced/repaired. Need to build myself an elevator).

Everything inside the box is of good quality, very impressed with it for my first plane. Is touchy and took some getting used to first flight, so perhaps not best choice for first plane, but I managed so if you are keen to skip the trainer stage, not a bad choice.

Very good value as it was cheaper for my to ship from HongKong to Australia, than purchase anything locally.

NOTE: This plane does not come with engine mounts as stated in the description!!!

Customer files
No File Name Download [2152]
No File Name Download [1903]
failed elevator Download [2646]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save