New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Easy 3D Balsa GP / EP 1280mm (ARF)

Easy 3D Balsa GP / EP 1280mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
4370000017-0
WANT FREE SHIPPING? Click here to find out more!

De Easy 3D is een geweldige formaat club aerobatic model van de traditionele stijl die is ontworpen om veel plezier evenals goedkope en makkelijk te bouwen.

De Easy 3D is licht van gewicht, maar is ontworpen om een ​​beetje misbruik te behandelen! Bijvoorbeeld, de legering onderstel is uniek rubber gemonteerd, de bestuurbare staart wiel maakt gebruik van een aanzienlijke roer & romp mount, alle drie de wielen te gebruiken juiste rubber banden, de controle hoorns zijn de heavy duty type en de kap is van een moeilijke GF constructie . Ook opgenomen met de Easy 3D is mounts voor zowel gloed en EP, brandstoftank, motorsteun en spinner, waardoor het veel waar voor uw geld!

Deze grote presterende "club" aerobatic model is ook goedkoop om te bouwen, zal standaard servo's worden meer dan tot aan het werk voor iedereen, maar de meest hardcore 3D-piloten en er is geen twijfel over het vermogen van deze mooi geprijsd model, het is briljant low speed performance gecombineerd met het is makkelijk om te vliegen natuur maken van de Easy 3D een geweldige eerste 3D-model of op lage prijzen, een geweldige leuke aerobatic model!

Kenmerken:
• Lichtgewicht Balsa / Ply Bouw
• Felgekleurde & Traditionele See Through Covering, Groot voor Orientation
• Snelle en eenvoudige Build
• Rubber gemonteerd U / C
• Uitgebreide hardware inbegrepen
• Grote Eerste 3D-Plane
• Mounts voor Ofwel Glow of EP
• slijtvast RubberBanden All Round
• Plug In Wings voor gemakkelijk transport
• Grote, Quick Release Canopy

specs:
Spanwijdte: 1280mm
Wing Gebied: 45dm2
Lengte: 1190mm
Gewicht: 1900g ~ 1950g

vereist:
Uw eigen 6-kanaals TX / RX
0.46 Glow Motor / 42mm Brushless Motor Outrunner rond 800w (3D)
5 x Standard Servo (4 x voor het EP versie)
60A ESC (EP Version)
RX Battery (Lipo of NiMH)
UBEC (voor EP of Lipo RX batterij)
4s Lipo 2700mAh ~ 3300mAh (EP Version)

  • Sku 4370000017-0
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 3594.0000
  • Lengte 940.00
  • Packaging Width 190.00
  • Hoogte 430.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very good plane,stable,easy landing,capable for 3D.Flies without problems on a lower speed (not to low!).Takes a lipo 4S/4000 without any problem what does give a flying time from about 8 minutes.Motor SK3 4240 ,prop 14x8 wood.All right for H.K.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good plane,stable,easy landing,capable for 3D.Flies without problems on a lower speed (not to low!).Takes a lipo 4S/4000 without any problem what does give a flying time from about 8 minutes.Motor SK3 4240 ,prop 14x8 wood.All right for H.K.

Try again signed me out before I had posted.
Nice plane looks and feels well built.
If you want to run Glow then you need to cut the bolts down on the landing gear mounts inside to make enough room for the tank to fit in .
I have made mine Electric using a 1100w motor 4s 4000mah 40c lipo 100A opto esc sbec .
run motor on a 13x6 prop = 928w 80A should be plenty for my prop hanging 3D moves.
900watts is about the same as a .46 glow
Had to move battery back to get the c of g .
This plane is for 3D not for fast flying.
Once I get the time and weather to fly it I will give the results

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Try again signed me out before I had posted.
Nice plane looks and feels well built.
If you want to run Glow then you need to cut the bolts down on the landing gear mounts inside to make enough room for the tank to fit in .
I have made mine Electric using a 1100w motor 4s 4000mah 40c lipo 100A opto esc sbec .
run motor on a 13x6 prop = 928w 80A should be plenty for my prop hanging 3D moves.
900watts is about the same as a .46 glow
Had to move battery back to get the c of g .
This plane is for 3D not for fast flying.
Once I get the time and weather to fly it I will give the results

Good looking plane, great hardware. My only deduction is because I had to inject glue into the wing to secure some parts that were loose. I haven't assembled it yet but am getting ready. I have an OS .46 2 stroke to put on it. It should zoom.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good looking plane, great hardware. My only deduction is because I had to inject glue into the wing to secure some parts that were loose. I haven't assembled it yet but am getting ready. I have an OS .46 2 stroke to put on it. It should zoom.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save