Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

EDF Ducted Fan Unit 7 Blade 3.5inch / 89mm

EDF Ducted Fan Unit 7 Blade 3.5inch / 89mm

QTY:

Now save bewaar € 0,00 € 0,00

€ 16,71
Stock:
Gewicht:
183 g
SKU:
OR003-00110-7B

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

EDF Ducted Fan Unit 7 Blade 3.5inch
Blade Diameter: 3.5inch / 89mm
Outer Diameter: 96mm
Wanddikte 2 mm
EDF Lengte: 86mm
Blade Type: 7
Shaft Maat: 5 mm
Dit EDF zal een motor te nemen met een maximale diameter van 39mm


Gemaakt van hoge sterkte kunststof.
Spare propellers beschikbaar.

Recomended Motor: 36-70 5 Turn (14.8 ~ 22.2V)
ESC: 50A
Rpm: 2,000kv
Vermogen: 1000 ~ 2,500g Thrust


Product
Specifications

Aanvullende Informatie

  • Sku:
    OR003-00110-7B
  • Brand:
    Nvt
  • Gewicht ( g)
    183.00
  • Lengte
    120.00
  • Breedte:
    100.00
  • Hoogte:
    120.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Well like most folks say you have to balance this bad boy. I ran it up with my 1400kv Inrunner before balancing on 6 cells and it vibrated so much I couldn't put it past half throttle plus it moved the test bench across the floor paving stone and all.

Before I put this in the model I was getting 1278 watts and 54amps on 6s
I then got it installed and tested it in the model and got an additional 100 watts the amps went up to 58 too.

Jepe Fast foam Mirage 2000 weighs 5.5 pounds with glass so it should perform rightly. Haven't flown it just yet though so we shall see.
Quality
Value
Overall
Quality
Value
Overall
I ran it up today after checking fan for balance. Mine was OK out of the box. It certainly has some serious thrust on 5 cells and the HK 2850KV motor, it's not a toy like the 70mm units. Easy to fit motor too.
Quality
Value
Overall
Quality
Value
Overall
I use this fun with motor warhead 1850kv on 5s nanotech 4000mah esc k-force 100A on my homemade jet. the thrust is 2400 gr with intake ring! and consumes 86 Ampere. and also the sound is very good. exellent fun!!
Quality
Value
Overall
Quality
Value
Overall
Very powerful ,unit @ low price .And with rite motor you can get almost 4kg of thrust ,WOW Thanks Hauye .The blade is balance , if vip check the shift and hole in blade for a perfect setting ,thats all you need.
Quality
Value
Overall
Quality
Value
Overall
if you well balanced the fan reinforce the motor mount and add a intake lip like I did from a extra one that I had from a midi fan with a arc motor 36/75/1680 kv you will get around 2400 watts and below 110 amps on 6s 5000 mah 35/50 c
Quality
Value
Overall
Quality
Value
Overall
great edf but fist find the motor it well take
Quality
Value
Overall
Quality
Value
Overall
It runs very well after balancing. Great thrust! It has also a very nice sound (almost like a real turbine at high rpm).
Quality
Value
Overall
Quality
Value
Overall
Keep an eye on the balance when you mount it !!!
Quality
Value
Overall
Quality
Value
Overall
Upon balancing, I found that the hole that is bored through the center of the fan was drilled at a slight angle. The hole is centered correctly in the rear of the hub but slightly off-center in the front. Needless to say this made balancing a bit more interesting.



Materials and moldings seem to be of good quality.



The price makes the extra effort worthwhile if you are on a budget.
Quality
Value
Overall
Quality
Value
Overall
Using this EDF with a Novak HV-Pro 5.5 system. Didn't mount it yet but was able to pull 44A peak (measured with the Turnigy wattmeter) with 4s lipo...and that wasn't at full throttle since it's scary when you're just holding it. This is the only 5mm shaft EDF that I could find on HobbyKing, but I'm glad I bought it. It's a shame that the max diameter is 39mm when the Mamba Monster series is 40mm.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.