New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

EDF Shark 850mm 64mm EDF, EPO (PNF)

EDF Shark 850mm 64mm EDF, EPO (PNF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
189000010
WANT FREE SHIPPING? Click here to find out more!

De kans is groot, had je niet verwacht een vliegende Shark zien, terwijl de trawlvisserij rond uw favoriete RC website en als je denkt dat er iets fishy aan de hand is, denk opnieuw, dit is een nieuwe versie van een oude favoriet nu gemaakt van super stoere EPO schuim!

Dit EDF jet leuk is gemakkelijk te monteren, de 64mm ventilator, ESC en servo's zijn allemaal vooraf geïnstalleerd, het onderstel is plug-in, ideaal voor degenen die willen naar de buik van het land en de enorme gapende mond kan de krachtige ventilator om slok perceel's van lucht, wat betekent dat er tonnen van stuwkracht voor een 3s model!

Hoewel niet strikt "schaal", de EDF Shark is een geweldige performer, snel, acrobatische en enorm veel plezier, het is een briljante sport vliegtuig voor weinig geld, dus als u zin ​​netting jezelf een nieuwe fun-fly jet, kijk dan niet verder dan Jaws hier, zal hij niet bijten .... veel!

Kenmerken:
Plug and Fly, maar RX en LiPoly toevoegen
Eenvoudig en snel bouwen
Geweldig optreden
Tough EPO schuim bouw
Maakt gebruik van gemeenschappelijke 2200mAh 3s LiPoly (niet inbegrepen)
Plug in onderstel
hardware inbegrepen

specs:
Spanwijdte: 850mm
Lengte: 1030mm
Flying Gewicht: 700g
EDF: 64mm met 39L borstelloze Outrunner Motor
ESC: 25A w / BEC
Servo: 9g x 3

vereist:
Uw Eigen 4-kanaals TX / RX
2200mAh 3s LiPoly Battery
Foam-safe lijm

  • Sku 189000010
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 2019.0000
  • Lengte 960.00
  • Packaging Width 220.00
  • Hoogte 250.00
  • EDF Shark Jet
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

The wings and elevator are horrible, I don't see them lasting through one flight much less many, them the control horns are very cheap and will fell, save you money and buy something built better, this is more of a novelty item not a lasting flying plane/shark.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The wings and elevator are horrible, I don't see them lasting through one flight much less many, them the control horns are very cheap and will fell, save you money and buy something built better, this is more of a novelty item not a lasting flying plane/shark.

First I find that the wings are very cheap and have a feeling they will fold during a flight, then there is no manual with it to let you know the correct CG, I guess I'll just stick a battery in it and see what happens, the body is one big ball of foam but the tail section and wings have no support and will break very easy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First I find that the wings are very cheap and have a feeling they will fold during a flight, then there is no manual with it to let you know the correct CG, I guess I'll just stick a battery in it and see what happens, the body is one big ball of foam but the tail section and wings have no support and will break very easy.

Very good un requin qui vols trs facile utiliser
trs trs bien super ractif trs surprenant

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good un requin qui vols trs facile utiliser
trs trs bien super ractif trs surprenant

Le requin volant et trs facile piloter il va super vite et trs impressionnant en vol
j'ai surpris tout le monde quand je les fais vol
pour moi le seul dfaut c'est la roue arrire on ne peut pas la dirig pour dcoller ou aterir
il vaut mieux le lancer la main

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Le requin volant et trs facile piloter il va super vite et trs impressionnant en vol
j'ai surpris tout le monde quand je les fais vol
pour moi le seul dfaut c'est la roue arrire on ne peut pas la dirig pour dcoller ou aterir
il vaut mieux le lancer la main

Maiden flight today and my first setup was aileron up/down 10mm, elevator 8mm, c/g 100mm behind the wing leading edge very nice and flying weight 895g (2200mAh 3S lipo plus 63,3g added lead). Flying went very well and it was easy to start with this setup. I will modify this plane for night flying too.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Maiden flight today and my first setup was aileron up/down 10mm, elevator 8mm, c/g 100mm behind the wing leading edge very nice and flying weight 895g (2200mAh 3S lipo plus 63,3g added lead). Flying went very well and it was easy to start with this setup. I will modify this plane for night flying too.

This edf sharks seems to have more than enough power for regular flight and might even do a loop though not a tight one.

First thing to do, I changed out the 25 amp esc and used a 35 amp instead. This should be done if you want the esc to last longer and not quit in flight.

Rear wheel should be reinforced by taping the foam before gluing the rear wheel. Then add a stiff support to the rear of the rear tail fin to prevent it flexing during bad landing.

CG is like everyone said, 11cm from edge but it still feels a bit tail heavy if you're used to slightly nose heavy. It all balances out nicely with 2200ma 3s lipo pushed all the way to the front. Add a lipo buzzer to bring more nose weight too.

During take offs, it tends to pitch up a little, due to huge mouth intake, but once reaching flying speed, it stays level. Good nice floater.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This edf sharks seems to have more than enough power for regular flight and might even do a loop though not a tight one.

First thing to do, I changed out the 25 amp esc and used a 35 amp instead. This should be done if you want the esc to last longer and not quit in flight.

Rear wheel should be reinforced by taping the foam before gluing the rear wheel. Then add a stiff support to the rear of the rear tail fin to prevent it flexing during bad landing.

CG is like everyone said, 11cm from edge but it still feels a bit tail heavy if you're used to slightly nose heavy. It all balances out nicely with 2200ma 3s lipo pushed all the way to the front. Add a lipo buzzer to bring more nose weight too.

During take offs, it tends to pitch up a little, due to huge mouth intake, but once reaching flying speed, it stays level. Good nice floater.

As review below, no instructions supplied with this model, ok assembly is very easy, however some info on C of G location would cost Hobby King nothing and would certainly help customers. As the previous review, I found the so called 24 hr help next to useless, i contacted them on a separate issue, took a week for an answer and when they did, they suggested an item that was out of stock everywhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As review below, no instructions supplied with this model, ok assembly is very easy, however some info on C of G location would cost Hobby King nothing and would certainly help customers. As the previous review, I found the so called 24 hr help next to useless, i contacted them on a separate issue, took a week for an answer and when they did, they suggested an item that was out of stock everywhere.

Well built body and lots of thrust with stock setup but awful electronics!

Neat plane, seemed to be flying well for the first few seconds of it's maiden flight until I lost thrust and had to hard land. I opened the access door and smoke poured out, the ESC was on fire!

I was using a 1800mah 3s LiPo...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well built body and lots of thrust with stock setup but awful electronics!

Neat plane, seemed to be flying well for the first few seconds of it's maiden flight until I lost thrust and had to hard land. I opened the access door and smoke poured out, the ESC was on fire!

I was using a 1800mah 3s LiPo...

This plane will not even take off using the stock set up! It is very underpowered. The body is built strong as a tank, but all the fins are flimsy, You will need to upgrade the motor before you will be able to gain enough speed to lift off. Hand launching is about impossible as is. No rudder or steerable tail wheel, no instructions, no cg measurements, the elevator push rods are too short if you mount the control horns in the pre drilled areas. Sloppy waste of money. This plane is a novelty:(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane will not even take off using the stock set up! It is very underpowered. The body is built strong as a tank, but all the fins are flimsy, You will need to upgrade the motor before you will be able to gain enough speed to lift off. Hand launching is about impossible as is. No rudder or steerable tail wheel, no instructions, no cg measurements, the elevator push rods are too short if you mount the control horns in the pre drilled areas. Sloppy waste of money. This plane is a novelty:(

minus a crown for the terrible packaging! My shark has a big gouge across the nose from the idiotic cardboard edge it rests against inside the box. Just dumb. As an aside, I ordered some lipos with it, they were just thrown in to bounce around inside; not taped down or anything.

Bah. Not quite bad enough to return it. Just a warning to other buyers!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

minus a crown for the terrible packaging! My shark has a big gouge across the nose from the idiotic cardboard edge it rests against inside the box. Just dumb. As an aside, I ordered some lipos with it, they were just thrown in to bounce around inside; not taped down or anything.

Bah. Not quite bad enough to return it. Just a warning to other buyers!

  1. 1
  2. 2
Customer files
No File Name Download [122]
820684894X300642X9.jpg Download [122]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save