New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Edge 540 EP / 0,25 1200mm (ARF)

Edge 540 EP / 0,25 1200mm (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
HZ-EDGE-540
WANT FREE SHIPPING? Click here to find out more!

Dit Edge 540 is prachtig gebouwd en afgedekt en vangt de lijnen van de Edge 540 zeer mooi. Het is zeer licht, die in combinatie met de royale afmetingen stuurvlakken mades deze Edge een ideale 3D-model, ook met minder gooit is het een ideale sport flyer.

Dit Edge wordt geleverd met een sterke motor mounten als het is ontworpen voor zowel elektrische of gloeien macht, want EP moet u op zijn minst een 400W en voor gloed, een 0,25 motorinhoud. Voor 3D vliegen, moet u gebruik maken van een hoog koppel digitale sub micro servo's (niet inbegrepen), voor sport vliegen, 9g servo zal fijn zijn. Dit prachtige zoek Edge functies sluit vleugels op een CF-vleugel buis en een bestuurbare staartwiel, waardoor voor een praktische als een goede kwaliteit en goed uitziende aerobatic model.

"0.25" balsa class modellen zijn al jaren populair en het is geen wonder, ze zijn klein genoeg om praktisch en goedkoop te bouwen te zijn, maar ze vliegen als een veel groter model, als je nog nooit geprobeerd deze klasse, dit prachtige Edge 540 zou een geweldige plek om te beginnen!

specs:
Spanwijdte: 1200mm
Lengte: 1040mm
Wing Gebied: 28dm2
Flying Gewicht: 1450g

vereist:
Uw eigen 4-kanaals TX / RX
4 x Digital High Torque Sub Micro Servo (3D) of 4 x 9g Servo (1 Servo voor Glow Power)
350W ~ 500W borstelloze Outrunner of 0,25 Glow Engine
Fuel Tank en toebehoren (Glow Power)
40A ~ 50A ESC w / BEC (EP)
50mm Spinner
2200mAh ~ 3300mAh 3s LiPoly Batterij (EP)

  • Sku HZ-EDGE-540
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 2332.0000
  • Lengte 890.00
  • Packaging Width 195.00
  • Hoogte 320.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good plane but weak pack it arrived crushed and open (didn't notice until received) and the plane with some formers broken but reparable, the tube that goes inside the wings didn't arrive, I have to look for it in stores.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good plane but weak pack it arrived crushed and open (didn't notice until received) and the plane with some formers broken but reparable, the tube that goes inside the wings didn't arrive, I have to look for it in stores.

Received my edge about a week a go. Went together with no problems, covering was not the greatest lots of seams to re seal. Wheel pants are white not black, no glow mount just electric, haven't had it out for a fly yet still winter up here in Canada, looks like it should fly alright will post when I get it airborn.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my edge about a week a go. Went together with no problems, covering was not the greatest lots of seams to re seal. Wheel pants are white not black, no glow mount just electric, haven't had it out for a fly yet still winter up here in Canada, looks like it should fly alright will post when I get it airborn.

I flew for the second time today, a verry smooth flight, durin a inverted cuban 8, verry slow, it broke both horizontal stabilazer, I don't know how I could land, when hit the ground because of the high descent ratio, it broke the engine mount. I'll fix it and reinforce it very well, but I see tha is a verry week plane. Teke care!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I flew for the second time today, a verry smooth flight, durin a inverted cuban 8, verry slow, it broke both horizontal stabilazer, I don't know how I could land, when hit the ground because of the high descent ratio, it broke the engine mount. I'll fix it and reinforce it very well, but I see tha is a verry week plane. Teke care!

the value in this planes was good. the only thing i noticed different was the coulors were lighter and more seethrough. mine was shipped from hongkong to australia. i ordered it in the christmas season so it toook 17. when it arrived it had a big dent in the box i opened it up and the left side of the fuselage was chrushed slightly, and the cowling was deformed. other than that the kit was in good condition. the manaul was suprisingly easy to use with picture and tips. overall it was a decent plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

the value in this planes was good. the only thing i noticed different was the coulors were lighter and more seethrough. mine was shipped from hongkong to australia. i ordered it in the christmas season so it toook 17. when it arrived it had a big dent in the box i opened it up and the left side of the fuselage was chrushed slightly, and the cowling was deformed. other than that the kit was in good condition. the manaul was suprisingly easy to use with picture and tips. overall it was a decent plane.

After reading a negative review regarding the poor quality from one of bros there, I got worried as I purchase my plane a day before the post.
I am glad I got my in good condition and the quality is fantastic! Thanks HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After reading a negative review regarding the poor quality from one of bros there, I got worried as I purchase my plane a day before the post.
I am glad I got my in good condition and the quality is fantastic! Thanks HK!

Be aware! HK sends now another kit, not the one, shown on the pictures. It's much heavier (1060g from the box) and of low quality

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Be aware! HK sends now another kit, not the one, shown on the pictures. It's much heavier (1060g from the box) and of low quality

Nachdem beim Jungfernflug das halbe Hoehenruder nur noch an der Folie hing konnte ich die Edge nur mit grosser Not ohne weiteren Schaden landen. Nach der Reparatur wars beim zweiten Flug dann entgueltig vorbei. Nach einem Turn kam sie ins Trudeln und lie sich nicht mehr abfangen. Das ist mir, mit einem 3D Flieger, noch nie passiert!? Schade ums Geld!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nachdem beim Jungfernflug das halbe Hoehenruder nur noch an der Folie hing konnte ich die Edge nur mit grosser Not ohne weiteren Schaden landen. Nach der Reparatur wars beim zweiten Flug dann entgueltig vorbei. Nach einem Turn kam sie ins Trudeln und lie sich nicht mehr abfangen. Das ist mir, mit einem 3D Flieger, noch nie passiert!? Schade ums Geld!

There were following missing parts in my Edge:
- plywood motor mount
- wheel pants
- tail wheel
- accessories pack
- CA higes from the other aileron

I'm still waiting for the missing parts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There were following missing parts in my Edge:
- plywood motor mount
- wheel pants
- tail wheel
- accessories pack
- CA higes from the other aileron

I'm still waiting for the missing parts.

Got mine, my landing gear and the wheel cap thingy is totally off from the pic!
My landing gear is not black as shown in the picture and the cap cupping the wheel if white! anyone else encounter this issue?

HOBBYKING...WHAT?!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got mine, my landing gear and the wheel cap thingy is totally off from the pic!
My landing gear is not black as shown in the picture and the cap cupping the wheel if white! anyone else encounter this issue?

HOBBYKING...WHAT?!

I have flown this plane 7 times now and I can do most 3D tricks. This plane hovers very easily! The kit is very good for the price and goes together very nicely. Watch the COG! The only complaint is the control rods provided for the rudder and elevator. They are too weak and bend.
I am using:
OS 750 EP engine - 300wats on 3S battery
14x7 prop for 3D
40Amp ESC
3S 2200mAh Turnigy Battery
Hitec HS65 servos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have flown this plane 7 times now and I can do most 3D tricks. This plane hovers very easily! The kit is very good for the price and goes together very nicely. Watch the COG! The only complaint is the control rods provided for the rudder and elevator. They are too weak and bend.
I am using:
OS 750 EP engine - 300wats on 3S battery
14x7 prop for 3D
40Amp ESC
3S 2200mAh Turnigy Battery
Hitec HS65 servos

  1. 1
  2. 2
Customer files
No File Name Download [1319]
HK manual Egde 540 Download [3589]
Edge 540 from Mannigs Download [1484]
Edge 540 from Mannigs Download [1724]
weight of hardware Download [95]
huge gap between aileron and wing Download [34]
No File Name Download [77]
I'v got two comlects of hardware, but no Download [147]
weight of wing join tube Download [69]
weight of cowl Download [107]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save