Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Emax PM1806-2300Kv borstelloze Multi-Rotor Motor Set (1xCW 1xCCW)

Generating Links

Emax PM1806-2300Kv borstelloze Multi-Rotor Motor Set (1xCW 1xCCW)

Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
045000031-0
Geen verzendkosten? Klik hier meer leren!

De Emax borstelloze motoren zijn bij het front van technologie met de unieke toepassing van glasvezelversterkte kunststoffen in de bouw van de behuizing. Dit levert een ultra-lichtgewicht motor die nog steeds sterkte en duurzaamheid. Combineer dit met hoogwaardige lagers en magneten evenals betrouwbare metalen stator brace en mounts.

Elke set bestaat uit zowel de klok mee en tegen de klok in schroefdraad prop adapters, waardoor deze een must voor de 250 formaat multi-rotoren.


Kenmerken:
• Glazen versterkte kunststof behuizing
• Lichtgewicht en robuust
• Hoge kwaliteit lagers
• Hoge kwaliteit magneten
• CW en CCW schroefdraad prop adapters
• Metalen inzetstukken voor montage

specs:
Polen: 9N12P
KV (RPM / V): 2300
Input Voltage: 2 ~ 3S (7,4 ~ 11,1 V)
Max Thrust: 290g
Prop Grootte: 5 ~ 6 inch
Voorgestelde ESC: 6 ~ 10A
Gewicht: 1 9g (per stuk)

PROP Vermogen / PWM% Voltage (V) Stroom (A) Thrust (gf) RPM
5X4.5 STD 10 11,1 0,28 10,07 2595
5X4.5 STD 25 11,1 1,45 96,79 7269
5X4.5 STD 50 11,1 3,94 209,7 10589
5X4.5 STD 75 11.1 7,91 338,61 13626
5X4.5 STD 100 11,1 9,03 363,57 14144
5X4.5 STD 10 14,8 0,32 22,12 3602
5X4.5 STD 25 14.8 2.06 151,62 9039
5X4.5 STD 50 14.8 5.61 311,08 13136
5X4.5 STD 75 14,8 11,39 473,45 16022
5X4.5 STD 100 14.8 12.37 487,52 16210

  • Kv ( tpm / v ) 2300.00
  • Max Currents (A ) 8.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 78.00
  • Shaft A ( mm ) 5.00
  • Lengte B ( mm ) 15.00
  • Can Diameter C ( mm ) 25.00
  • Kan Lengte D ( mm ) 10.00
  • Totale lengte E ( mm ) 0.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • EMax Multi Rotor Plastic Motor
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Benoit | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Oct 23, 2016

The motors are of very poor quality. The casing in plastic is extremely fragile and broke off after the 1st flight. The holding of the shaft broke off from the upper part.
I do not recommend this motors.

Kovács | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Sep 04, 2016

im very disapointed... very weak motors... it needs just a little hit and 10pcnt slower
for this price you can buy 2204-2300 kv motors
i do not recomend it if you are a beginner and if you are a pro/expert than you nevah' gonna buy these..... "motors"

Karen | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jun 06, 2016

These motors are stunning! They are 10 times better than the multistar motors, some people say they are weak and may break, I have had tens of very, very hard crashes and they work like a dream! The only disadvantage is the fact that they do scratch, not being metal, but this is nothing, doesn't effect the function, just bugs me a bit... I am using 12amp King Kong escs with 2200mah 3s 30c and a 1500mah 3s 25mah, 230 frame and the props are 5x3, although I think you can use 5x3x3 props, but i am yet to test... Btw, the bearings are fine, one was a bit stiff, but loosened up after a fly and a bit. Also use ecalc to add it up.

casey | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 22, 2016

I purchased these to put on my HK Color 250 Frame and they are perfect. This I my first attempt at an FPV quad and these motors did not break the bank at all. I'm using them with a 4x-12A ESC and the motors have more than enough power and punch out with gemfan 5030 props. I hit a pole in my fire station and landed upside down on a concrete floor and the motors were perfectly fine... Not even a scratch. I will definitely be purchasing these again!

Ig0rb | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 09, 2016

work very good on my 3d printed 250 quad!!!

Robert | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Jan 05, 2016

Stay away from these, unless you never crash your multirotor!

The smallest crash will separate the motor from the base. The bearing is surrounded by a 1 mm plastic shell which joins the top of the motor to the mounting plate. The slightest impact on these will cause the top of the motor to separate, and the wires will inevitably rip out.

I broke every single one from very minor crashes. In all cases, the propellers didn't even break which shows how minor the crashes were.

If you buy these, you might as well throw your money away. HK shouldn't even stock these because of how low quality they are.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 16, 2015

Not powergull but its cheap.. if you fly slow, there is no problem

Tonib | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 31, 2015

I love this ones I ordered 4 but maybe I going to order many more

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 30, 2015

These motors are great. I purchased these for my first ever quad build. They have a uniform 16mm spacing for mounting. If you cut the wires you will have to scrape off the enamel to tin the wires with a soldering iron. They are only warm after running for almost ten minutes constant (3s) on a 250 frame with recommended props.

kr4mt@suddenlink | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Aug 24, 2015

So far these motors have been working really well for my budget build color 250 quadcopter. Balance is good, has plenty of power and much better quality than I expected from a plastic motor.

  1. 1
  2. 2
  3. 3
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!

Accessoires