Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

Composite Glider w / Motor 1410mm (Plug N Fly)

Composite Glider w / Motor 1410mm (Plug N Fly)

QTY:

Now save bewaar € 0,00 € 0,00

€ 155,63
Stock:
Gewicht:
1930 g
SKU:
189000038

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
acc
Product
Omschrijving

Een mooi afgewerkt composiet pod en giek stijl zweefvliegtuig met balsa en lichte ply vleugels, 3 x 9g servo's vooraf geïnstalleerd voor rol- en lift functies, waaronder ook de vooraf geïnstalleerde 28-36 1800kv NTM Prop Drive borstelloze outrunner met 20A ESC.


De vleugels en de staart van het vliegtuig zijn gemaakt van goede kwaliteit balsa en lichte laags, ook met pre scharnierende stuurvlakken.

Alle hardware is inbegrepen in het vak aan de glider in de lucht te krijgen met minimale montage. Mits is een carbon vleugel spar en carbon look boom. Zoals bij elke goede glider, de vleugel is gemakkelijk te verwijderen aanbieden van snelle montage / demontage van het veld, dit maakt transport en opslag een briesje.

U hoeft enkel uw eigen Tx / Rx en LiPo batterij toe te voegen aan het zweefvliegtuig in de lucht te krijgen.

Kenmerken:
• Composite romp
• Carbon fiber blik boom
• Afneembare vleugel voor een gemakkelijk transport
• borstelloze motor en het vouwen van 9 x 6 prop w / spinner opgenomen
• 3 x 9g Servo

specs:
Spanwijdte: 1410mm
Lengte: 704mm
Motor: 28-36 1800kv NTM borstelloze outrunner (inbegrepen)
ESC: 20A
Flying Gewicht: 450g


Vereiste:
4 kanaals zender en ontvanger
3S 1800 ~ 2200mAh LiPo batterij

Product
Specifications

Aanvullende Informatie

  • Sku:
    189000038
  • Brand:
    Nee
  • Gewicht ( g)
    1930.00
  • Lengte
    1030.00
  • Breedte:
    160.00
  • Hoogte:
    235.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
When this arrived the tail was broken off,and needs extensive repair.The elevator rod is to stiff to work and will also need attention.There is no method of attaching the canopy,just a bit of wire glued in,but that doesn't work.It was obvious the tail was broken before despatch,and the other things are just poor design and thought.Very disappointed with this product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
MODEL IS VERY BEAUTIFUL, BUT SOME COMMENTS, THE RED BAND IS A PAINTING AND STRIPS VERY EASILY, THE SERVANTS NOT GOOD QUALITY ARE BUT RUNNING, THE ENGINE IS STRONG AND ENOUGH TO RISE VERTICAL, ESC OF 20A heats A LITTLE, AND The HOME THE FLIGHT iS VERY sTABLE and docile, wORTH A BUY
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am disappointed very poor quality.
one servo does not work
a flap has a small travel
fixing the wing, impossible to assemble
empennage assembly through 3degrer
esc too small
corvering Film full of air bubble
no assembly instructions
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I replaced the stock ESC as it was getting quite warm just sitting on the bench with the battery plugged in and replaced the stock props with 6x4 ( https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13130 ). Assembly took one evening. Build quality is OK but the horizontal stab is a bit flimsy and slightly misaligned, the balsa construction is quite good as is the composite pod. Flies quite well and thermals nicely with a 1300mAh 3s. I will probably add rudder at some point or program in some differential aileron to correct for adverse yaw.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not the best glider out there but with a lit bit of work you can actually fly it some day :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Several defects found when finishing assembly. Vertical stabilizer was cracked, horizontal stabilizer was warped, elevator servo and control rod were stuck (glue in control rod line), the brown paint freely chips from mono coat, control arms for ailerons not long enough (connection touches the wings lower surface). No flights yet, seems to have more than enough power. Then the price drops a week after purchase. A file with some minimal instructions would be good (no CG info).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very disappointed in this model. Quality is very poor for the following reasons:
1. Two out of the three servos were bad out of the box.
2. Tail section is glued in place approx ten degrees off. Vertical stab and horizontal stab do not align with fuselage and wings.
3. Paint chips were falling off out of the box and continue to fall off, even on the bench which I have covered with a towel. The paint definitely does not have enough elasticity properties. This thing looked like a beater plane BEFORE it was ever flown!
4. No instructions what so ever. No idea where to set throws or CG. This model takes very small throws on elevator and ailerons so be cautious. Also, there is a set screw that holds the prop on the motor shaft. You will not see this initially as you have to disassemble the prop adapter to find it.

With all the work this plane has taken on the bench to fix all the bad quality issues, I would have preferred an ARF. It would've been faster to build than to repair and I would have used better components.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [14.14Mb]

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.