Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

EPS EDF Jet 64mm

Generating Links

EPS EDF Jet 64mm

Prijs:

Now save bespaar € 0,00 € 0,00

€ 38,62
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
F-F5
Geen verzendkosten? Klik hier meer leren!
Een uitstekende parkflyer sized EDF Foamie (EPS).
Dit EDF jet komt 97% pre-gebouwd en wordt geleverd met een krachtige 25A borstelloze EOF-systeem.

Spec.
Wing Span: 590mm
Lengte: 700mm
Flying Gewicht: 400g
Motor: 14L Inrunner borstelloze motor
ESC: 25A
Servo: 9g * 2
Batterij: 1300mAh 3s1p 15C LiPoly Pack (niet inbegrepen)
EDF Diameter: 64mm
Benodigde items;
Zender en ontvanger. (4ch +)
Beperkte voorraad - Als ze eenmaal weg zijn ze weg zijn!
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

CPT. HAUK | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 16, 2011

I purchased this 5 years ago from a local hobby show (free-wing) brand

a friend of mine purchased this from this site a few weeks back, did piece to piece comparison, everything is the same. (cept servos, i modded mine)

so my review should be quite fair.

okay,
IT LOOKS REAL GOOD
IT FLYS VERY WELL (NOT RECOMMENDED FOR BEGINNERS)
More than 1:1 thrust to weight ratio.
need alot of negative expo, (-50 for me)
used a dualsky 11.1v 2200mah battery

follow this video for set up (Sorry bro, I haven't filmed mine yet, gotta borrow yours since it's kick-ass accurate)

http://www.youtube.com/watch?v=bqVdIoOljaQ

Ron | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 15, 2011

Took a while to write the review, but good little plane. Very agile and quick. Due to the size, I would reccomend that the pilot keep it in close as it gets very small very fast and can be difficult to track and recognise orientation durring maneuvers. It handles well, but landings can be tricky. Be cautious when bringing it in on grass fields at speed. I was flaring it before touchdown and lost an elevon when it got snagged on thick grass and pulled it off the plane. Repairs have been easy and were done with hot glue. Be mindful of the glue temp as mine was a bit too hot and melted some of the foam. All in all a decent plane.

Wolvereine | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 22, 2010

I have had about 10 flights with this model and it is great fun. I am using a small 1300 3s Lipo and it will climb vertical!

To Launch:

Only use 3/4 throttle and give it some up elevator and throw at about 30% and it will be fine. DO NOT GIVE IT FULL THROTTLE ON LAUNCH!

Mellemel | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Oct 13, 2010

Been flying my F-35 for a year now and it's AWESOME. It's completely stock and it works perfectly. If there were 100 stars it would get them all !

Richard | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 19, 2010

This is a twitchy little aircraft and quite fast. The colour makes it difficult to see and even harder to see what way it is going. If you do not know how to set the radio then find someone to help as it is very hard to work out and will waste a lot of your time. I have enjoyed nervously flying this plane but today it met with a full speed dive into a newly made hole in the ground, think one servo can be used again. I will replace this model with

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2010

Great, little fast jet. A great little hand launcher.

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 22, 2010

Hi, I have one of these little planes and allways struggeld with it (because of the down thrust on full throttle and the 2 servos only) until I decided to install 2 more servos for the elevator. Now it flies 100% better, much easier to control and more stable. Ah, the stock motor burnt at the second flight and the esc at the fourth. Now flying with a Towerpro 40A ESC and a EDF Outrunner 4800 KV. Really fast and more stable!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2010

Really nice edf jet. Great performance for the size, and the detail is great. Got lots of ooh's and aaah's the first time I brought it out of 'the hanger'. Sadly, it was more than I could handle for the maiden. It repairs really well! Maiden ripped the wing off and broke the nose off from the fuse just forward of the intakes. A little hot glue and some new trim settings and she was fine!

Klant | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2010

This is the first jet that I mastered. Had i known about the up elevator-4-neutral I could have done a lot better faster. This little piece needs a good chuck at 3/4 throttle, 45 degree launch "in wind' but a 30 degree launch in zero wind. Best situation is an 8 knot wind on an overcast day. I like this plane and is ideal for an intermediate fliers. Its lively but not fast

rmgmag | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 08, 2010

I bought one of these back in May. It is a total nightmare to launch. On just about every launch it rolls left, stalls and ends up tearing up the nose. After gluing it back together one too many times, I gave up. I think I got 6 decent flights out of it before it finally died.



Once you get it up and flying, it flies very well. Smooth tracking and pretty fast too. Easy to land. As I stated above, take offs are a nightmare.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!