Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Extra-260 EP 49inch ARF

Extra-260 EP 49inch ARF

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
3800 g
SKU:
Extra-260EP
Product
Omschrijving

Extra-260 EP 49inch ARF Laser gesneden ply & balsar. Inclusief mount, lichtmetalen buizen en toebehoren. GEGEVENS Spanwijdte: 1245mm Lengte: 1192mm Wing Gebied: 26.8dm2 Voorgestelde Motor: Turnigy 42-XX grootte of 35-48 Recomended ESC: 60A Aanbevolen Prop: 11x5.5 of 12x8 Gewicht (zonder motor / batterij etc.): 1050g * Kit is dubbele lading boxed op bescherming in het vervoer te waarborgen. Een blog is gestart met dit model door een van onze Franse klanten. http://myhobbycity.com/showthread.php?t=3952

Product
Specifications

Aanvullende Informatie

  • Sku:
    Extra-260EP
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    3800.00
  • Lengte:
    930.00
  • Breedte:
    220.00
  • Hoogte
    360.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this plane in sale for 56 Euros and it takes a lot of effort and work to make this baby fly. The landing gear mount must be reinforced, the Elevator Balsa breaks easily and is too thin. The Canopy does not fit properly and the Cowl is slightly too small for the fuselage. I fly it with 3S 3000-3300mAh Lipo batteries, Turnigy XP 3548/1100KV brushless motor swingig a Turnigy 13x6 wooden E-Prop and a YEP 60A ESC. Goes unlimited vertical with this setup but for 3D the Rudder deflections are too less. This EXTRA 260 is very light but also very fragile. It flies very good and is easy to land. All in all its sure wirth the money but you have to be patient and must invest many hours too be satisfied in the end.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice looking plane. Mounting was easy, took me 3hrs. Waiting for the turnigy 4240 800kv brushless motor for 13*6.5 APC and 4s lipo.
Hope it wille do some 3D extreme, will see.....
Overall good quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Heb model overal verstevigd met latten. Motorschot versterkt. Landingsgestel vervangen door HK carbon. Bok voor lanndingsgestel binnenin verstevigd.
Motor Prop Drive 42-38 met een 13 x 4 prop op 4S 3300 MAH. Gaat prima.
Gewicht totaal 1750 gram.
Binnenin de romp zit stukje doorzichtig plastic geplakt. Dit moet eruit om zwaartepunt goed te krijgen met accu. Zwaartepunt heb ik op 85 MM.
Leuk uitziend model, maar heeft wel aandacht nodig bij het bouwen.

Bij de maiden vloog de cockpitkap eraf. Model heeft luchtinlaat maar geen luchtuitlaat. Door de opgebouwde druk schoot de kap die met magneten vast zit eraf. Schade viel mee.
Heb nu achteraan twee luchtuitlaten gemaakt.
Cockpitkap wil ik nog vastzetten met een pennetje o.i.d.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
beautiful model, built clean and of good quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is my 2nd attempt to warn you guys about buying this new extra. My 1st complaint in 50 orders. Flying 30 yrs. Bought one of these 3?yrs ago and it flew beautifully doing hard aerobatics. Decked it several weeks ago (brain fart), and so ordered another. $30 dearer. New kit is VERY poor standard. 2 full days to straiten, epoxy strengthen and re-glue it. Won't be buying another. The list is very long. This plane should never have got past ANY QC. HK is big enough to screw any supplier who boxes crap like this to them. Its nowhere near the 1st one's quality....No carbon in this one.(Al and plastic !) Grossly over shrunk covering enough to crack stringers. Missing bolts etc, bad dust in paint work, canopy is so 'crazed' its hard to see through. etc etc it just goes on and on. My 1st winge ok !! Why not return it ?? $30 to get it $30? to return and then the hassles.....I'd built one previously didn't open it all up until needed. I have used old canopy, wings etc so to late. Good luck if you buy one examine it all before doing anything. If yours is a good kit you will be happy.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is real great.
My first Balsa plane but still one of the best among what I got.
It has been already three years with more than around 1000 flights.
Now, would like to buy another one but no stock available.

Please H.K. Restock this great plane.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just got my second Extra 260 and the motor mount was assembled backwards, with left and up thrust instead on right and down thrust. I took the motor mount apart and reassembled it to fix this problem. See description under the discussions. The plane will not fly straight and ture with an incorrectly assembled motor mount.
The plane is now complete and flying. With the rebuilt motor mount it flys straight and ture just like my first one did.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received, box had water stains so I was careful to access while unboxing.
All appears OK. Did a preliminary assemble to make sure small parts were all there. This appears to be complete. Careful with the loose fit hinges as a couple of them slid inside never to be seen again. The finishes are good with the exception of the white skin has some hot iron scorching on a few of the wing ribs. Some pen marks are from factory also on the wings. This does take away from the close up appearance, once in the air nobody will ever notice. The CD that contains the directions leave a lot to be desired. Best to have some previous building experience or someone to help along the way, Otherwise a great value and I am looking forward to having it ready to put up in the air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pour le prix rien a redire,sauf que c'est un avion lger, et fragile,montez le train sur vis nylon,avec crous 4mm.Sinon bonne qualit en vol, la masse avec accu 3s3000, est de 1610gr, moteur 3548.A la construction ,ontez l'avant du fuselage < le nez > et rsinez a l'poxy cela suffit a rigidifier l'ensemble.Centrage a 85mm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a great deal but not for the first timer,may need a little know how to finish .but flies great look good what do you want for under 100 bucks?
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.