Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

Extra 330 Balsa Plug and Fly 1500mm voor 6s w / Motor / ESC / MG Servo

Extra 330 Balsa Plug and Fly 1500mm voor 6s w / Motor / ESC / MG Servo

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
5995 g
SKU:
189000031

Combine

essential items and
battery
acc
Product
Omschrijving

Ooit wouden een fatsoenlijk formaat 3D of Acrobatische Sport Fly balsa vliegtuig, maar waren verbijsterd door de set-up keuzes? Of misschien wilt u gewoon een grote balsa sport vliegtuig dat kan worden geassembleerd in dubbele snelle tijd? Als dat zo is, deze geweldige uitziende en zeer capabel Extra 330 is voor u!

De all balsa bouw van deze mooie maat Extra is mooi gedaan, net als het vakkundig aangebracht bekleding. Het niveau van de pre-montage is zeer hoog voor een balsa model, de krachtige outrunner borstelloze motor, ESC en Metal Gear Digital Servo's hebben al geinstalleerd! Eenmaal uit de doos, je gewoon nodig om lijm op de horizontale stabilisator, schroef in de bal verbonden stuurstangen, bout op de prachtige Carbon Fibre onderwagen, tuig van de pull / pull roer en je bent in principe goed om te gaan! De vleugels zijn plug-in, zoals je zou verwachten en zijn gemonteerd op een grote, maar lichtgewicht CF buis, is de grote luifel beveiligd door een goede vergrendeling en kan worden geraadpleegd in seconden voor snelle veranderingen batterij, zodat evenals mooi uitzien en briljant, de Extra is ook praktisch!

Er is geen twijfel dat dit extra is zeer capabele 3D vliegtuig maar als een schaalmodel, het is ook zeer geschikt voor sport aerobatic's en gezien het formaat, de Extra is een perfecte club size model. De lichte regeling is uitstekend geschikt voor oriëntatie, en de krachtige vooraf geïnstalleerde motor zwaait een 15x8 prop op 6s, meer dan genoeg vermogen voor elk type van het vliegen! Deze extra 330 is een fantastische en zeer capabele model dat het gemak van een schuimige gecombineerd met de duurzaamheid, prestaties en precisie die alleen balsa te bieden heeft!

Kenmerken:
Stevige maar lichtgewicht Balsa Construction
Uitstekend niveau van afwerking met Prachtig Applied Covering en Painted GF Kap & wielkappen
Grote controle Surfaces, Ideaal voor 3D
Uitstekende Regeling voor Oriëntatie
Vooraf geïnstalleerde Motor, ESC & Servo's
GF Servo Horn Extensions & Horns
-Ball gekoppeld pushrods
Trek / Pull Rudder controle
6s Macht Swinging 15x8 Prop voor Amazing Vertical Prestaties
Advanced Level van Pre-Finish voor snelle en eenvoudige montage
Koolstofvezel onderwagen & Wing Tube
Plug In Wings voor gemakkelijk transport

specs:
Spanwijdte: 1500mm
Lengte: 1500mm
Flying Gewicht: 3000g (Ongeveer Afhankelijk On LiPoly Capacity)
Wing Gebied: 46.2dm2
Wing Loading: 54.1g ~ 71g dm2
Motor: 500kV Brushless Outrunner
ESC: 80A w / SBEC
Servo: Digital Metal Gear x 5
Spinner: Plastic w / Alloy Backplate
Prop: 15x8

vereist:
Uw Eigen 5 ~ 6-kanaals TX / RX
4000mAh ~ 5000mAh 6s LiPoly Battery

Product
Specifications

Aanvullende Informatie

  • Sku:
    189000031
  • Brand:
    Nvt
  • Gewicht ( g)
    5995.00
  • Lengte
    1365.00
  • Breedte:
    295.00
  • Hoogte:
    420.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall




all servos are bad . the servo output arms are not glued properly . My model has crashed due to a defective elevator servo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Make sure you check the canopy lock. The pin on mine retracted and the canopy flew off in flight and was damaged when it hit the ground. :( Make sure you pull the wire pin forward and make sure it has engaged the ply former properly before taking off. Also, check the temperature of the motor and look at cooling. I cut a hole in the bottom of my cowl (as per full size) to let hot air out and am contemplating adding air deflectors on the 2 air inlets either side of the motor to direct cool air onto it and blocking off the centre inlet. There is no hot air outlet. My motor got very hot after one flight. I changed the ESC timing settings to see if that will help.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I probably had a similar experience to some of the other reviews but I thought I would itemise my points:
- Kit was delivered in a big plain double skinned box. Nicely wrapped parts and nothing was damaged inside. Everything as advertised.
- Structure is nice, looks like decent laser cutting and glue. No big blobs of hot melt glue so what ever glue it used, it is neat and tidy.
-Covering on my model was very good, cannot really complain. Iron on as opposed to self adhesive which is good. Will have to see how it copes with lots of use. Had to sick the graphics on the model and there were no pictures in the instructions I received to show me the reference points. I used the pictures on the HK site as a guide.
- Nice CF undercarriage. Shame the spats don't have anti-rotation screws, etc.
- I found the ailerons and rudder warped, had to heat the covering to straighten the control surface. I believe this is pretty normal with ARTF's. Straighten them before gluing the hinges, especially the rudder!
- I had to ask HK for a copy of the assembly manual which had the CG location but no control surface throw recommendations. I emailed support and received those and also the ESC manual.
- The ESC was faulty from new. Send videos to HK support and they shipped a new one. Can't really complain about support. Hopefully my motor lasts.
- I can't say I have had a problem with the
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Colis reu en parfait tat mais entoilage de la drive mal ralis (vrille). Une vrification complte des fixations est faire! Manque de colle a tous les niveaux ! Manque balsa pour fixation capot moteur ....
Problme liaison esc-moteur ( bruits a diffrent rgime et surchauffe moteur aprs 3 min de vol ). surement le PWN donc changer esc et plus de bruit!
Moteur cram apres 3 vols. ( a ce demander si c'est pas un moteur 5s )
Le premier achat dcevant chez hk !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Review part 2: The fitted servos are too slow, especially for 3D flying and one of the elevator servos was 'sticky' until I partially dismantled it to free it up.
Flying - despite adding a little nose-weight to correct the CoG, the model is still very tail heavy and very, very sensitive in pitch, so needed shorter elevator throws and lots of exponential (70pcnt ).
Other than that, it will fly amazingly slowly, nose high without dropping a wing. Also surprisingly the stall is relatively clean. There is plenty of power and most of the time it will needs only 1/2 to 2/3 throttle. Above about 2/3 throttle it makes a lot of noise and vibration - Why? ESC timing? Prop is balanced but supplied bushes may be a problem? .Or is it the motor?
Prop hanging is relatively easy, especially for the small size and certainly much better than my now deceased electric EPO Thunderbolt, but not as nice a 55cc Edge 540 I have.
So, hopefully this will be a good model to teach myself 3D flying.
The wheels are really too small for flying off our grass strip so will dispense with the wheel pants and up-size the wheels.
Overall - I'm happy but a few things need to be sorted out before it becomes an enjoyable, reliable model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Review Part 1:
Hi Guys, I recently bought this model to replace my HK EPO SBach Thundebolt, which totalled itself after the Turnigy BEC failed.
The model is built to a high quality, but some minor issues let it down:
1. The film covering easily peels back in places and so the entire needs to be run over with an iron.
2. Not all screws are secure. Need to check all screws and nuts, adding Loctite where appropriate. I destroyed a wheel pant on landing, partly due to a loose nut.
3. Some parts are missing - specifically the nylon wing bolts. Also, it needs some wooden dowels (or pegs) fitting to the rear of each wing root . These should locate in already drilled holes in the fuselage when the wings are fitted, preventing the wings from rotating. Currently it relies just on the fuselage wing fairings to stop rotation which is insufficient IMHO.
4. Assembly instructions - tiny pictures and insufficient or no supporting wording. Not at all useful unfortunately.
5. I fitted 5000mAH 6S Nanotech battery packs, but the C o G was still just behind the recommended point.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Leider bin ich mit dem im Modell eigebauten Teile wie Servos,Regler und Motor nicht zufrieden. Der Motor hat im einen Lgerschaden(hohes Laufgeraesch mit Vibationen),der Regler hat ein unsauberes Regelverhalten(stottern beim Hochlaufen) und die Servos haben keine praeziese Rckstellung.Diese Teile sind mal wieder Chinamuell!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very nice accro plane - powerful - motor burned after 40 minutes
flight - elevator servos must also be replaced.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine arived with some damage to the cowl an vertical stabilizer. Servos seems to be very low quality, but in general the model flys well. its impresively light and aparently it is very fragile to. As other buyers already stated it has absolutely no information about eletric motor, esc, servos or whatever.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice structure design, low quality assembly, bent ribs in the wings, covering peals out.
Low quality packaging, the kit arrived with a torn covering on one of the ailerons and a hole in fuselage covering.
No assembly and set up manual and lack of information about motor, ECS and servos.
The following hardware parts were not included:
a. 4mm thumbscrews for the wings
b. Helen screws for linkage stoppers
c. Push-pull clevises were predrilled with a slight angle
Recommendations:
Reinstall ball-linked pushrods and pull/pull rudder control.
Reinstall and re-glue all control horns; half of the horns havent been bonded.
Apply CA over all bonded elements,
The airplane is tail heavy, use lypo pack to find the right CG location.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Extra 330 Balsa Plug and Fly 1500mm for 6s w/Motor/ESC/MG Servo

  • Extra 330

Upload video
Upload
Files

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.