Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

F-86 Desert Rats EDF Jet 70mm Electric Zet vrij, kleppen, Airbrake, EPO (PNF

Generating Links

F-86 Desert Rats EDF Jet 70mm Electric Zet vrij, kleppen, Airbrake, EPO (PNF

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 129,00
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
F-86-70-DR
Geen verzendkosten? Klik hier meer leren!
Een echte koude oorlog strijder, de F-86 Sabre gevonden roem in de Koreaanse conflict van de jaren 1950, het is een echte klassieker met goede reden, en dit prachtige EPO Plug N Fly model doet dit echt geweldig vliegtuig rechtvaardigheid.

Being PNF is een snelle build, de machtige EDF unit / ESC combo is vooraf geïnstalleerd als zijn alle servo's. Dit model is een goede grootte en heeft een 4s LiPoly naar de aard van de prestaties die u zoekt, ook voor een leuke afwisseling in deze klasse, heeft de LiPoly compartiment is ontworpen om een ​​grote pack voor fatsoenlijke vluchttijden te nemen.

Naast het feit dat een prachtig uitzien en model, dit Sabre zit vol met functies zoals vooraf geïnstalleerde elektrische trekt, optionele daling tanks, kleppen zijn weer vooraf geïnstalleerd als de remkleppen, die je kan ofwel ingesteld op een apart kanaal of verbinden uit te breiden met de flappen, in feite deze moeilijke EPO jet heeft slechts één ding ...... een Mig 15 van deze nieuwe reeks van koude oorlog klassiekers tot handgemeen met!

specs:
Spanwijdte: 1103mm
Lengte: 1085mm
Flying Gewicht: 1500g
Wing Load: 100g dm2
EDF: 70mm met 2836kv 2770 Outrunner borstelloze motor
ESC: 45A
Servo: 9g x 11
6 ~ 7 Channel (gas, lift, rolroer, roer / besturing, trekt, kleppen / airbrake)

inclusief:
alle Hardware
instructie Book
Lijm

vereist:
Uw Eigen TX / RX minimaal 6 Channel
3200mAh 4s LiPoly Battery
  • F86
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

tim | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 30, 2014

Upgraded this with dr mad thrust 3900kv out runner , and it goes way better. Stock set up only gets about 800g of static thrust. With this upgrade now getting about 1300 with auw of 1600. Much,much more fun. Looks awesome too

tim | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2014

Recently picked up one of these as a second EDF after the vampire. Out of the box, the findings are:
- limited documentation, however everything basically makes sense
- the paint job on a couple of the surfaces was hopeless - like they forgot a second coat somewhere.
- someone forgot to hinge the right elevator, but there was an included bag of plastic hinges to do it.
- the fan was clipping its housing, needed some adjustment to set that straight.
All up, these are pretty minor things, at that price point you couldnt really ask for more.

At the field, the maiden was great - the plane just tracks perfectly. Needed like one click of adjustment to fly straight & level. Speed is good but not bowel shattering. I used zippy 2650 40C 4S battery, and got about 3 mins out of it. Landing with no flaps / speed brake was easy enough, on later flights using them made the plane almost stop in the air and the landings very easy.

On first landing, BOTH main gear fell off the model. As in, I was mentally patting myself on the back for a great landing, no bounce etc, and the wheels just fell off. There was just not enough, or not strong enough , glue on there. Reglued them with 5 minute epoxy, and no further landing gear problems on rest of flights.

Only other problem was my battery got hot & puffy, which you cant really blame the plane for. All up I'm really happy with this machi

Ted | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Apr 05, 2013

More than happy with this plane so far. Looks beautiful on the ground and in the air. Plane takes off well, flies very stable and lands predictably. All parts are working properly. Motor is smooth with almost no vibrations. Not a fast plane stock by any stretch but just looks great. Have had no problems thus far. I think this plane is a great value and may purchase another for back up. If your an F86 fan you will like it.

Wayne Dizi | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Feb 25, 2013

My first EDF jet: stable to fly, a lot of fun! Poor quality control on the impeller adapter after the motor, as I have mentioned in the discussions plus a failed retract out of the box, hence my 3 stars for quality, yet overall it is a good price for a good plane! Probably a little slow for a jet, but I need a slower jet as my first so I'm happy! Detail is pretty good and very simple to assemble... By the way, it arrived on my doorstep in less than one week from the US warehouse. Can't argue about the shipping costs either and no shipping damage. Thanks HK!

jaredw911 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2013

This model looks great and flys great. there are a few issues.
i never got the plane off the ground with the original fan and motor unit.
i upgraded this to an alloy fan unit and new brushless motor and run this on a 6s 2700mah battery.
the lretracts especially the front one are very weak. i have upgraded these to oleo retracts and modified the location of the steering servo.

now these mods have been performed it takes off flys and lands great.
even with these issues i still think this model offers great value for the price.

wolfmanbr | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 28, 2012

Got mine two days ago and seems that I haven't got luck this time.
The plane looks great, BUT: the edf is seriously unbalanced, the tiny double arm on the front gear was broken and worse: the 2 airbrake servos are dead. So I have to make a new steering arm from alu (HK doesn't sell this steering arm), balance the fan and replace 2 servos (one of them inverted!).
After flying it, I will report how it performs

greg | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 15, 2012

After all the crap of putting together it flys as great as it looks Just reglue all the retact blocks with epoxy they arent glued at all looks just press fit . as far as the nose stearing you gotta figure that one out ur self .. But its way cool in flight

greg | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jul 12, 2012

Nixce looking model But the instructions suck ! hooking up all the extras not for the beginner . If it flys as good as it looks well worth the price

CHRISTOPHER | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 03, 2012

Got my F86 today got to say what a disapointment absolute rubbish no retract servo wires so i went a got some from my local hobby store only to find out that they don't work and looking at the way the landing gear is put on the won't last long if they did work.

Klantbestanden
Front LG pull pull steering detail Download [190]
LG steerin detail Download [45]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!