Houding, al de beste allround FPV headset in de Fat Shark line-up, is supercharged met de toevoeging van de revolutionaire 3-assige Trinity hoofd tracker. De 16bit, 9DFO 3-assige hoofd tracker is niets minder dan perfectie die camerabeweging bindt aan beweging hoofd zo nauwkeurig en soepel dat het creëert de meest overtuigende meeslepende FPV ervaring ter beschikking.
De 35 graden FOV scherm een perfecte balans tussen grote scherm onderdompeling en compact pixeldichtheid duidelijkheid. De Houding V2 sport dezelfde gepolariseerde backlight technologie die wordt gebruikt in het prachtige Dominator display voor levendige kleuren en heeft een instelbare IPD voor het kiezen in de optiek sweet spot.
Het maakt gebruik van Attitude NexwaveRF technologie met een high-pass filter om het ongevoelig voor 433 MHz en 2,4 GHz UHF radio-interferentie te maken. De kwaliteit strekt zich uit tot de buitenkant met zijn strakke ergonomie, rubberen textuur shell, tactiele beweging IPD sliders en beveiligde rubberen oogschelpen, de AttitudeV2 headset ziet en voelt geweldig van binnen naar buiten.
Als u uw reis naar FPV Nirvana te verkorten, de AttitudeV2 bundel bevat de hoge prestaties 600TVL FPV afgestemd CMOS camera voor RTF uit de doos (pan / tilt / roll mount niet inbegrepen).
Kit bestaat uit:
Atttitude V2 headset (met geïntegreerde 5G8 RX en Trinity hoofd tracker)
1/3 "CMOS 600TVL FPV afgestemd NTSC / PAL-camera
250mW 7ch 5G8 TX
3dBi 5G8 antenne x 2
Futaba 6p datakabel
3.5mm JR datakabel
ezUHF MiniDIN datakabel
Optics: FOV (gezichtsveld): 35 ° diagonaal (Beeldformaat: 1,3 m @ 2m)
Interpupillary (IPD) afstand: 59 ~ 69mm (instelbaar)
Hierin kunt u optionele dioptrie lens inserts: -2, -4, -6 DPT
Gebruiker Controls: Channel selectie / head tracker reset
Elektrisch: Voeding: 7 ~ 13V (2S / 3S supply)
Antenne: 5G8 3dBi dipool (circulair gepolariseerde compatibel)
Display: Full color LCD LED-backlit Kopin CyberDisplay 922.000 pixels binoculair display (640 x 480 VGA) NTCS / PAL auto selecteren
Head Tracker: Trinity 16bit 9DFO 3-assige
Batterij: 2S 7.4V 1000mAh (vereist, niet inbegrepen)
Voeding: 7 ~ 13 V (2S / 3S supply)
Vermogen: 310mA @ 7.4V
TX vermogen: 250mW
Antenne: Externe dipool (circulair gepolariseerd compatibel)
Gewicht: 22g (w / antenne)
Voeding: 3,5 ~ 5V
Vermogen: 60mA @ 5V
Imager: 1/3 "CMOS 600TVL, FPV afgestemd licht handling, NTSC / PAL
Lens: 2.8mm IR gecoat, 100 ° diagonaal FOV (ideaal voor vaste camera)
Lens extruderen: diameter 15x14mm
3.5mm AV in / out poort
PS / 2-DIN head tracker data port
5740 MHz, 5760 MHz, 5780 MHz, 5800 MHz 5820 MHz 5840 MHz 5860 MHz
Gewicht ( g)
very good goggles. worth the price you pay.They are great quality and have a good feel to them,whoooa that was the fastest shipment ever.. 4 days from china to israel with DHL
great googels amazing screen quality (Compering the teleporter) great range with immersion spironet circular polirazed antenas
i just love it i just love hobbyking
well done!These were my first FPV goggles and my first FPV experience. I can't compare to other goggles becasue i have not used them. But these have a really good field of view and the quality of the image is very good. I will probably be upgrading to a different camera for better video. I highly recommend this product for any FPV pilot. Even though they aren't the cheapest they are worth every penny haven't had any problems with them and i hope they last me a long time.Not very good range with stock antenna I got a deffictive product and I'm still waiting for a refundI received my kit and after 2 flights without any crash the video transmitter fail. I sent back my kit to HK and they replaced it.
But today, When I tested my new kit, I attached the camera exactly like before, but when I takeoff impossible to fly due to A LOT of jello on the camera... Really strange because I attached it EXACTLY like the first camera, and the first camera never had jello :(
So opened a request to HK for this problem but no replay...
Apart this problem, the kit is good to start fpv / fpv racing like me (or not due to camera...)
No other problem, good quality and 1000ft with spironet antennaThe Manual is not very good. To install and use the Head Tracking Funktion is very explaned. I saw this Video on you tube :https://www.youtube.com/watch?v=HI2VKT52kzE
after this i had no Problems!Everything worked out of the box. The picture delivered by the 600TVL CMOS camera is not the best, there are colour convergence issues, and low light performance is poor. But for the price and as a beginner camera I guess it's adequate. I also bought the three axis pan/tilt/roll camera mount, which works well with the Trinity head tracker, but there is one issue: It turns quickly in all directions except when panning to the right, there I get a really sluggish response. There is nothing wrong with the servos (checked with servo tester) so it appears to be an issue with the tracker. But it's not unusable, just slightly annoyingly slow in that single direction. Apart from that, everything works great. The tracker comes with channel 7&8 setup for pan and tilt, so you have to enter the beep menu to switch to three-axis control. It was not in the documentation how to enter the beep menu, you do that by holding the reset button down and then connect the battery and immediately release the reset button after the first beep. The eye cups are a bit uncomfortable, I will have to address that (maybe take parts from ski goggles). But all in all a great deal, recommend.This is my 1st time at FPV. I've had a few flights now using the Attitude v3 and it's so much fun. All works well. I've made my own pan/tilt/roll setup using three hobbyking sero's and it works a treat. Highly recommend this kit. Thanks fatsharkand hobbyking!I had my first fight & it was so much fun! It took abit of thinking to setup the head tracking to the transmitter but I got it working. I made my own pan/tilt/roll mount using hk servo's & it works & looks like a bought one. It will take some getting used to the height judgment. I thought i was well above trees when I was only about a metre or so above them. If you want to get into FPV or want to upgrade, buy this!!!!Just received these attitudes and am very pleased with the quality. Also got the pleasure of comparing these to other fatshark goggles (dominator v1, predators and teleporter) today for comparison at a quad meet.
Teleporters are terrible and I wouldn't bother with them as the picture quality is dissapointing to say the least.
Predators are really nice, comparable in picture quality to the attitude. Only difference I would say is the fov. When wearing the goggles the screen looks noticeably closer and bigger in the attitude. However if I didn't have or want to spend the extra I would have still been happy with the predators.
Dominators had a slightly better quality picture than the attitudes but smaller fov.
So in conclusion I would say that the attitudes are a good jack of all trade but as long as you stay away from the teleporters you can't really go wrong.