Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA

Firstar 1600 EPO / Plastic 1600mm (PNF)

Firstar 1600 EPO / Plastic 1600mm (PNF)

QTY:

Now save bewaar € 0,00 € 0,00

€ 99,26
Stock:
Gewicht:
3184 g
SKU:
043000018-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
battery
Product
Omschrijving

De Firstar 1600EX is een aantrekkelijk en prachtig ontworpen FPV platform met aa groot aantal leuke features dat dit model een van de beste in zijn klasse te maken.

Voor taaiheid en betrouwbaarheid, het model is voorzien van een door blazen gevormde romp, die gebruik maakt van Nylon en is vrijwel onverwoestbaar, zijn de vliegende oppervlakken allemaal gemaakt van taai EPO schuim. Vanuit een praktisch oogpunt, de vleugels zijn plug-in en het model vereist geen lijm voor assemblage. Alles gewoon schroeven aan elkaar. De buitenste kap is puur voor de looks en wordt gebruikt wanneer de Firstar 1600EX wordt gevlogen als een zweefvliegtuig, hoewel unclips in enkele seconden om een camera klaar platform, compleet met een pan / tilt servo montage gat dat is voorgevormde onthullen. Deze grote camera platform / vleugelkap is beveiligd door een snelle ontgrendeling en een keer verwijderd, onthult enorme luifel gebied voor montage batterijen en FPV apparatuur op een pre-gemonteerd triplex plaat. Alle servo's, motor en ESC zijn natuurlijk vooraf geïnstalleerd.

De tweedelige vleugel heeft lijsten voor het toevoegen van flappen, indien gewenst, plus gegoten C van G-indicatoren aan de onderkant voor een snelle pre-flight controles. Er is geen twijfel dat dit een prachtig ontworpen, hoge kwaliteit FPV model tegen een uitstekende prijs. Het zou eerlijk zijn om te zeggen dat het aantrekkelijker is om naar te kijken dan de meeste FPV platforms, niet te veel harder op te noemen, de Firstar 1600EX zal de RC Pilot uren plezier voor de komende jaren te geven!

Kenmerken:
• Plug and Fly - voeg enkel uw keuze van de batterij, de zender en ontvanger
• Gegoten EPO vleugels en blaas gegoten kunststof romp
• Ruim de voorkant romp compartiment
• Canopy / hatch heeft platte basis voor de montage FPV camera
• Stabiele prestaties vlucht
• Optionele kleppen
• Flat mount platform achterin vleugel aan FPV antenne monteren

specs:
Spanwijdte: 1600mm
Lengte: 1044mm
Flying Gewicht: 950g
Motor: 2812 1400KV borstelloze
ESC: 30A ESC
Servo: 4 x 9g

Vereiste:
4 ~ 5 CH zender en ontvanger
3S 11.1V 1800 ~ 2200mAh batterij LiPoly

Product
Specifications

Aanvullende Informatie

  • Sku:
    043000018-0
  • Brand:
    Nee
  • Gewicht ( g)
    3184.00
  • Lengte
    1050.00
  • Breedte:
    170.00
  • Hoogte:
    240.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
love this place. solid construction and decent glide capabilities, haven't had it long but so far it's outstanding i did swap out the motor and speedy as well as aileron servo's and elevator servo. and used them for flaps while using mg servo's all round, only because of the distance i want to do with this i dont want any failures.

all in all on the build i'd tell everyone to go buy one.!!!

love it!!!
Quality
Value
Overall
Quality
Value
Overall
The electronics are crap so I replaced the lot.
The plane itself isnt too bad but and its a big but...
The motor mount and pod are awful.
They are both soft and brittle.
I have ordered the V2 mount from Hobbyking in the hope that I will at last have a good fpv platform.
In the end this has cost me nearly double the buying price to get it working well.
Quality
Value
Overall
Quality
Value
Overall
The FPV raptor 1.6 is the best fpv plane i have had. Its rugged and has loads of carrying capacity. Just replace the electronics. They really need to supply a kit version.
Quality
Value
Overall
Quality
Value
Overall
This is great aircraft. The only thing that lets this aircraft down are the wing bolts, it would be more convenient if it had some type to thumb screws or quick release system.

Has good pay load capacity, and EPO foam is good quality.

Packaging could be better to protect the aircraft, mine had damaged on vertical stabiliser, but nothing a quick soaking in boiling water couldnt straighten out.

Quality
Value
Overall
Quality
Value
Overall
The decals I received where like 100 years old, all curled up and they dont stick. Hinges also need some reinforcement but those minor complaints aside, quality wise it seems fine, and a fairly easy build. There is LOTS of room in the fuselage, I shouldnt have problems mounting a flight controller, GPS, OSD, and amp sensor.

I flew the maiden with a 2200mAH battery and no fpv gear besides a mobius in the cockpit. Its borderline tail heavy even in that configuration, pitch stability was bad, didnt fly nicely. Forget about even smaller batteries, with a 2700 and 3300 it balances out and becomes a much nicer plane to fly, however, it also becomes even more underpowered than it was. Its OK for FPV and learning how to fly, but the power just isnt there to get you out of trouble, and even doing a looping from level flight is nearly impossible without diving for speed first.

Lack of power makes take off also a bit of a challenge, it needs a healty throw. Although I did manage to take off from the snow with no problems. Maybe it will work on (wet) grass too.

Power aside, flight characteristics are very good. Glide angle is excellent and I suspect flight times will be impressive (didnt time my flights, and it was freezing cold, but I suspect 20 minutes will be a given). She is pretty forgiving when stalled (if cg is correct), rolls nicely, doesnt 'auto level' like a bixler, but i
Quality
Value
Overall
Quality
Value
Overall
<a href='http://www.hobbyking.com/hobbycity/store/uploads/684449117X991778X39.JPG' target=_blank>Igor</a>

'''
http://youtu.be/Jksawf6IYuc
Quality
Value
Overall
Quality
Value
Overall
Purchased for my first FPV flying experience and flew well but felt a little under powered. Replaced all my servos for metal geared and fitted 40A ESC and a NTM 28mm 1400kv motor......perfect.
I went a step further and swapped out the wings for 2m Phoenix 2000 wings with minor alterations. Maidened it today and what a great plane for FPV gliding about was perfect. Needs a fair bit of weight in the nose and 2 x 2200mAh 3S batteries are perfect. As it doesn't use much power flight times are great too. HIGHLY RECOMMENDED.....
Quality
Value
Overall
Quality
Value
Overall
May be a little under powered but this plane can take a beating. Went into a nose dive close to the ground and hit with a load bang. Picked it up and brushed off the dirt to find a little gouge in the nose. I replaced the battery and check the flight controls and I was flying in 5 mins.
Quality
Value
Overall
Quality
Value
Overall
I can't really recommend this one because it requires so much upgrading to make it good. Mine arrived with 2 dead servos so I replaced most of them. The body is hard plastic, which is nice, but it's also heavy meaning that if you're going to put in a big battery and FPV gear then you also need to upgrade the motor. With stock motor it's ok but slightly underpowered and definitely will NOT take off from the ground as advertised, even with a 2200 in there. I ended up upgrading the motor to a Rimfire .10, which now allows it to take off from the ground and gain altitude reasonably quickly. Of course this also required a new ESC. You can see where this is going... It's now a much more expensive model.
Quality
Value
Overall
Quality
Value
Overall
Received it the other day double boxed which was good as outer box damaged,Hole in the side inner box was all good, on open the box wings wrapped in bubble wrap no damage, fuselage is bigger than expected blow moulded plastic as is the Phoenix. All bits and pieces are as they should be seems as though there are lots of spare screws 2 spare clevises and there was safety clevises rubber bands. Motor pod fits well and 4 screws to secure and is as described and esc, rudder and elevator fit in plastic clamp which clamps through tail section 2 screws for elevator and 2 screws for rudder all fit good, now for the bonus if you have a Phoenix the wing are exactly the same so the 2 meter wings fit and if you have the 2000 Phoenix you know have the 1600 Phoenix as these wings fit. All in all happy with purchase and HK service. Maiden flight to follow.
Quality
Value
Overall
View all reviews
Upload
Videos
  • Firstar EX Glider

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.