Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

AXN Floater-Jet EPO (ARF)

Generating Links

AXN Floater-Jet EPO (ARF)

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 42,06
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
AXN-C-KIT
Geen verzendkosten? Klik hier meer leren!

Accessoires

De AXN Floater jet is een perfect model voor beginners. Zijn stabiele vliegeigenschappen en vergevingsgezind handling maken het de perfecte platform om te leren vliegen. In tegenstelling tot sommige modellen in zijn klasse de AXN Floater-jet wordt geleverd met ailerons direct uit de doos. Dit is een kritieke controle-oppervlak dat alle ontluikende piloten moeten beheersen.

Gemaakt van sterke EPO schuim met een hoogglans afwerking van de AXN Floater-Jet is in staat om het bereiken van hoge snelheden in een kleine hoeveelheid ruimte of zweefvliegen rond gracieus op de wind alleen hoeven gaspedaal om hoogte te winnen.

De voorspelbare vliegeigenschappen, lage vleugel laad- en pusher prop ook de AXN Floater-Jet een ideaal platform voor FPV. Gebruik een kleinere batterij zoals een 1600mAh 1800mAh 3s1p zal zorgen voor extra lading aan de voorkant van het vliegtuig en het vinden van de juiste CG zonder extra staartgewicht eenvoudig toevoegen.

De voorgestelde motor en 5x5 propeller bieden zowel de prestaties en de vlucht tijd op basis van uw vliegende stijl. U krijgt een 2100kv Brushless outrunner vereisen, 4 x 9gram servo's, een 1600mAh ~ 2200mAh 3s1p LiPoly batterij (afhankelijk van de payload-eisen) een 20Amp ESC en je eigen zender en ontvanger (Tx / Rx) om dit model te voltooien.

Bewezen keer op keer de AXN Floater-Jet teken alle dozen voor iedereen die op zoek te krijgen in de hobby als een beginner of intermediair piloten op zoek te krijgen in de spannende wereld van FPV vliegen.

specificaties:
Spanwijdte: 1290
Fuse Lengte: 860mm
Motor: 2100Kv Outrunner (niet inbegrepen)
Propeller: 5x5inch x (2pc inbegrepen)
ESC: 20A (niet inbegrepen)
Servo's: 4 x 9g servo (niet inbegrepen) voor Rudder, Lift, 2x Aileron

Vereiste:
Uw eigen RX / TX
20A Brushless ESC
4 X 9g Servo
1600 ~ 2200mAh 3s LiPoly
2100kv Outrunner motor

  • Spanwijdte ( mm ) 1280.00
  • AXN Floater Jet with Turnigy Graphene 1500mAh 3S 65C and 6x5 Prop.
  • Low, Slow, and Inverted
  • FLY TYME - AXN Floater Jet Build Tips & Review
  • FLY TYME - AXN Golden Hour
  • AXN-FLOATER WITH 70 mm EDF
  • AXN Floater Jet Build Review & Tips - FLY TYME
  • AXN Floater Jet Flight Footage - FLY TYME
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Jose Maria | Geverifieerde koper

  • Overall
  • Quality
  • Value

AXN Floater-Jet EPO 1280mm (ARF)

Mar 13, 2018

Nice and cheap plane to learn to fly. 4 servos (9g), 30A ESC and the recommended motor and you are flying at a very low cost.

martin | Geverifieerde koper

  • Overall
  • Quality
  • Value

Easy to fly. Fly at walking speed or with unlimited vertical.

Nov 20, 2017

Buy the kit with the motor as it has enough power for unlimited vertical. With this plane you can float around searching for thermals or fly mild pattern style aerobatics. No 3D. I now have over 60 twenty minute flights on mine and I would buy it again. I use a 6-4 or 6-4.5 prop with the stock motor and a 3 cell 2200mah battery. Mine does have a couple problems. Don't trust the factory glue joints on the arf. They are really poor! All three of them. Take the time to glue it together with epoxy you won't be sorry. The ailerons are undersized so mix in some rudder it helps improve the roll rate considerably. I Used brightly colored tape to reinforce the hinge points, wing underside and leading edge, and the bottom of the fuselage. Don't forget to use the thread locking compound and your good to go.

RobRoy | Geverifieerde koper

  • Overall
  • Quality
  • Value

AXN CF

Sep 02, 2017

This is a very good plane. Very stable flight caracteristics in the air and fast. It is also a good sailplane. Go up in the sky and turn the engine down. Keep the nose down for speed and up you go!
Use APC prop 6x5 for best results. y don t trust the added props.

Jack | Geverifieerde koper

  • Overall
  • Quality
  • Value

One of the best starter planes

Aug 28, 2017

Amongst the best learner planes out there at a bargain price. It will grow with you too as it handles well at slow floating speeds as well a medium speed acrobatics. Great to learn on as it is a pusher and you can hand launch and belly land. I started learning on this plane and was able to fly solo within 6 flights, as a complete beginner.

gav | Geverifieerde koper

  • Overall
  • Quality
  • Value

great value, goes fast and slow, glides ok. bargain price. Easy to build, Great first rc

Apr 14, 2017

Highly recommend this plane. Definitely get the cheapest model and click on the motor in the Accessories tab and order it too, You'll need a 2200 3s Lipo, four Hextronik 9g servos and 25A BEC3amp speed controller, all available through HK. If you dont have a radio get a basic Radio Tx/Rx, like Turnigy 4,5,6 or 8 channel. I started with 9x Before you build its a good idea to watch the xjet AXN build youtube vid. Can take off on short grass in the park or throw launch but watch the dive when you crank it on.

gav | Geverifieerde koper

  • Overall
  • Quality
  • Value

great value, goes fast and slow, glides ok. bargain price. Easy to build, Great first rc

Apr 14, 2017

Highly recommend this plane. Definitely get the cheapest model and click on the motor in the Accessories tab and order it too, You'll need a 2200 3s Lipo, four Hextronik 9g servos and 25A BEC3amp speed controller, all available through HK. If you dont have a radio get a basic Radio Tx/Rx, like Turnigy 4,5,6 or 8 channel. I started with 9x Before you build its a good idea to watch the xjet AXN build youtube vid. Can take off on short grass in the park or throw launch but watch the dive when you crank it on.

kaido | Geverifieerde koper

  • Overall
  • Quality
  • Value

good plane

Mar 09, 2017

Good for beginners. Very hard to break. Simple to fly.

SKY FALL | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 07, 2016

Great plane for the novice and the more professional Pilot

Richard | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Mar 23, 2016

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2015

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

Klantbestanden
Manual Download [493]
my axn floater-jet Download [233]
my axn floater-jet Download [233]
Manual 01 Download [121]
Manual 02 Download [121]
Manual 03 Download [135]
motor_2 Download [139]
motor_1 Download [129]
cabin Download [224]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!