Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • USA
  • Global

Flycat EDF Foam Jet zeer snel (kit only)

Flycat EDF Foam Jet zeer snel (kit only)

QTY:

Now save bewaar € 0,00 € 0,00

€ 21,99
Stock:
Gewicht:
1395 g
SKU:
OR028-070

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
acc
Product
Omschrijving

Deze kleine kit duurt ongeveer 4 uur op te bouwen en zal voldoen aan de gashendel jocky in ieder van ons!

De flycat wordt geleverd met 56mm EDF en je zal een 25A ESC & 4800kv inrunner nodig.

Dit vliegtuig is extreem snel, (meer dan 100 mph!), Maar nog steeds stabiel op langzame vlucht.

Spec.
Spanwijdte: 640mm
Lengte: 800mm
Gewicht: 290g
BESC: 25A (niet inbegrepen)
Motor: 4800kv 20-30 size Inrunner (niet inbegrepen)
LiPoly: 1300mAh 11.1V 20C (niet inbegrepen)

Vereist.
Motor & ESC
3 x 9g Servo
5 of 10 min epoxy (Araldite)
1 x Servo Y lood
1 x Servo Extention lood
12AWG Silicon draad (20cm Voor motor ESC)
1300mAh 11.1V 20C lipo batterij
Uw eigen ontvanger en zender

Onze vlucht rapport.

Kit past goed samen, licht schuren van de voorste en achterste randen die nodig is om extra schuim te verwijderen. We kozen ervoor om niet het versterken van de vleugel met CF slangen, die niet hielpen blijken te zijn een probleem, zelfs op volle snelheid hoge G draait.

We kozen voor de BESC monteren waarbij de batterij gebied, in het geval dat de batterij nodig naar voren te worden verplaatst naar CofG aan te passen, maar dit was niet nodig.

EDF werd gemonteerd op de stick mount. Stick mount werd verkort, met de extra stuk gebruikt om het EOF te verhogen van de stick om het EOF lijkwade te wissen. 2 bouten hield de ventilator aan de stok, een voor en een na de ventilatorbladen.

Eerste vlucht.

We hielden CofG 9,5 cm van de top van de vleugels leading edge. De flycat werd met de hand gelanceerd op 3/4 gasklep, snel accelereren. Tot onze verbazing, was er geen trimmen nodig.

De flycat is een uiterst snelle kit om te vliegen, en vergde veel van de lift in de bochten. Wij stellen voor de invoering van de lift op maximale gooit. Het vergt enorme hoeveelheden lift tijdens de bochten!

Kortom een ​​uitstekende vlak dat soepel flys, zelfs op winderige dagen.

Wij stellen voor een goede lipo pack, zoals deze kleine hotty zal kauwen door een 1500mAh in slechts 5 minuten. We gebruikten de ZIPPY-R 1800mAh 22C 3s1p pack voor ongeveer 8 minute vluchten. Vergeleken met de ZIPPY Q-pakket met ons korte ongeveer 7 minuten gebracht.

Product
Specifications

Aanvullende Informatie

  • Sku:
    OR028-070
  • Brand:
    Nee
  • Gewicht ( g)
    1395.00
  • Lengte
    670.00
  • Breedte:
    95.00
  • Hoogte:
    375.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
A bit disappointed, I found out it's eps after I bought it! If it's half as tough as the skyfun I'll be happy with it :-)) great options with it edf or prop, WHY do they make these edfs where you have to buy SPECIAL long narrow motors to fit in them? I have a box full of spare motors none of which will fit the edf

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little plane and great little price. I fitted a Dr mad 50mm 4800 EDF and squeezed a zippy 2200 3cell in the nose. Worth buying good control horns and a couple of earth magnets for the canopy. fly's very stable for a little plane, you can also fly as if you stole it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For the money this is a great little model, fly's really well. Invest in better quality control horns and earth magnets for the canopy, I also fitted a Dr mad 50mm fan. a careful bit of thumbing the inside of the battery area allows a zippy 2200 3cell to fit nicely.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used Turnigy 2610 4000KV, Turnigy Plush 40 Amp ESC, 1800Mah 20C and supplied EDF.
Speed a bit dissapointiung but it did fly and handle very nicely, sure needs a bit of power on when landing.
7mm throw on aileron, 12mm throw on elevator, 30pcntexpo. CoG at 110mm.
Will try 2610 5000KV next.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am building my second Fly cat . ( the first one being still in fly condition ) .. I want to put a tri-axis gyro box (orange RX-3S which is the smallest ) on the 3 rudders .( which needs to carve some place inside the fuse )
But , despite the engine I choosed for N 1 was great ,(TGY 2815 , ID: T28151A4800 . 73 g ) I look for an other engine that should be less heavy : an INRUNNER , Out shaft diam : < 24mm . Kv 4800 . Power # 400W
Who can help me to find an other engine than the TGY 2815 EDF ?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The fan adapter in this kit has a 3mm diameter hole in it. Nearly all the inrunner motors have a 2mm shaft diameter. Can someone who is using the EDF post a source for an appropriate motor to fit the fan housing. Thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 4 for this palne,this plane a very good quality and handling, i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv propeller 6x4.Very stable once

Thanks hobby,i give 6 thumb
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane a very good quality and handling,i am very satisfied all.Very stable and fast enough i use battery 3s 1300 and 1500mah with motors turnigy d2826 / 6 2200kv.Very stable once
Thanks hobby
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3S 1000mah nano tech, 3 HXT servo, 30A birdie and Turnigy 2632 Brushless Motor 3400kv 350W with 5x5 pusher prop. CG 9 cm from the crossing of the leading edge. Average max speed : 120 km/h Perfect flight, easy to launch and less than 50 $ all together. A lot of fun.
For more speed find another motor high kv, 500W, 3S.
I definitely would get it again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very cheap, simple good kit that flies well and very fast long your setup and COG is correct. Very fast build as its so simple, great jet especially people who have spare electronics laying around from dead planes. I added tiny bit lead weight to the front to correct C.o.G running 1300mah 3S 25C lipo, 4000kv outrunner and 30amp esc
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • flycat pusher

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.