Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

FrSky X8R 8/16Ch S.Bus ACCST Telemetry Receiver W/Smart Port (no antenna cover) (EU)

Generating Links

FrSky X8R 8/16Ch S.Bus ACCST Telemetry Receiver W/Smart Port (no antenna cover) (EU)

Prijs:
€ 34,03
Aantal stuks:
Verzonden vanaf:
  • Global
Al gekocht
Toestand:
Op voorraad
SKU:
236000115-0
Geen verzendkosten? Klik hier meer leren!

The top of the range, 16 Channel X8R receiver from FrSky with 8 normal PWM outputs and no less than 16 channels on the dedicated S.BUS output. Now supplied with the 2015 firmware to compy with EU regulations.

The X8R is a surprisingly compact package compared to many 8 channel receivers and has all of the amazing functionality associated with FrSky products. The Smart Port supports the new hub-less sensors in addition to the older hub analog sensors.

The X8R supports 8 standard servo outputs, with a further 8 being available by using the S.Bus line with S.Bus supported servos or use a FrSky S.Bus Decoder, giving you a total of 16 channels. Alternatively, you can use two X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second. The second option will give a fantastic degree of redundancy, essential when flying large models and highly desirable in any event.

The X8 protocol is backward compatible, so that in D8 mode it works with the DHT, DJT, DFT and DHT-U transmitter modules. This mode you facilitate a total of 8 channels and all of the Smart Port functions so that you can still use the full range of digital sensors.
The PCB antenna has been recorded as providing up to a 20% gain in range over traditional and to save weight, these antennas do not have an external case.

This is an outstanding receiver for all applications and is perfect for use with the FrSky Horus, X9D and X9E Taranis transmitters, with their built-in XJT Module or any of the D8 systems to take advantage of the new digital Smart Port sensors.

The firmware of the X8R receiver can be upgraded by using the USB upgrade cables available separately (please see related items.)

 

Features:
• 16 channels
• Solid ACCST performance
• Full telemetry support
• Upgradeable firmware
• Smart port enabled
• Backwards compatible
• PCB antennas
• Suitable for use with FrSky digital sensors
• 2015 EU firmware
• RED certified for use in EU/GB

 


Specs:
Voltage: 4~10.0V
Operating Current: 100mA @ 5V
Range: >1.5km 
RSSI output: Analog voltage output (0~3.3V)
Dimensions: 46.5 x 27 x 14mm
Weight: 16.8g

 


Compatibility:
All 16 channels require the FrSky Horus, X9D/X9E Taranis, or the XJT module.
For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

fabryking | Geverifieerde koper

  • Quality
  • Overall
  • Value

good

Jan 27, 2022

ottime riceventi

TB | Geverifieerde koper

  • Quality
  • Overall
  • Value

good standard receiver

Jan 12, 2022

Hopefully again available from Euro Warehouse in future

Lubo | Geverifieerde koper

  • Quality
  • Overall
  • Value

Still good quality

Jan 12, 2022

I use it in nitro airplanes. Still good, hooked on HK Polyester Peel-n-Stick.
Flying in a 400m range my Taranis X9d Ist edition recorded 90 to 55 RSSI.

dorin | Geverifieerde koper

  • Quality
  • Overall
  • Value

Good product but not fully backward compatible with old ACCST modules

Dec 14, 2021

I have a Turnigy 9X with the DHT module from 2012 and this receiver didn't work right away. I had to re-flash to receiver with 1.x FCC firmware before I could bind it with the module.

tonnellier | Geverifieerde koper

  • Quality
  • Overall
  • Value

recepteur nickel

Nov 01, 2021

très bon article

tonnellier | Geverifieerde koper

  • Quality
  • Overall
  • Value

très bon article

Nov 01, 2021

good

Cooljack | Geverifieerde koper

  • Quality
  • Overall
  • Value

Bon achat

Sep 22, 2021

Bon matériel sans problème

EndyX | Geverifieerde koper

  • Quality
  • Overall
  • Value

still can bind with old x9d plus taranis.

Sep 17, 2021

this receiver is the european version but i can't bind with taranis x9d plus due to fcc mode. after that i am looking for a suitable firmware for fcc mode to this receiver. and amazing they can be binding and there is telemetry.now i can fly dji f450 flamewheel.i am very satisfied.

Benny | Geverifieerde koper

  • Quality
  • Overall
  • Value

verry good

Aug 23, 2021

verry good

Benny | Geverifieerde koper

  • Quality
  • Overall
  • Value

verry good

Aug 23, 2021

verry good

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Klantbestanden
Manual Download [511]
X8R_Taranis_opentx_telmetrie_Configuration.jpg Download [193]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!