Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Gee Bee-R3 1400mm EPO (PNF)

Generating Links

Gee Bee-R3 1400mm EPO (PNF)

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 182,07
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
177000008
Geen verzendkosten? Klik hier meer leren!

Er kan geen twijfel over bestaan, de Gee Bee R3 is een geweldige op zoek model en deze grote omvang Gee Bee heeft fantastische acrobatische prestaties aan te passen dat het hoofd draaien looks!

Gemaakt van harde EPO foam, dit R3 is eenvoudig en snel te monteren, vooral omdat de borstelloze outrunner motor, ESC en servo's zijn allemaal vooraf geïnstalleerd. Een van de meest opvallende kenmerken van de R3 zijn de grote wielkap, deze te verbergen zeer robuust, ply gemonteerd onderstel been en wielen die groot genoeg zijn om de zwaarste stroken aan te pakken met gemak zijn. Voor de final touch en flex te minimaliseren, de R3 is voorzien van gemakkelijk te staal tuigage die perfect voorspanning met dank aan de meegeleverde montage veren te installeren. Dit is een groot voorbeeld voor een schuimige, maar het is ook praktisch, de 1 pc vleugel is afneembaar voor gemakkelijk transport en de grote batterij luik maakt lipo swappen een wind!

Dit prachtige zoek R3 is een echte blikvanger, heeft de aanwezigheid in schoppen zowel op de grond als in de lucht, is het verrassend gemakkelijk om te vliegen en gewoon ziet er geweldig uit het maken van die laag n snelle passes, maar als je begint aan de aerobatic verkennen vermogen van de R3, is er geen twijfel over bestaan, wordt u onder de indruk! De neutrale casco maakt patroon stijl vliegen een briesje, Cuban 8's, knifedge geeft een Split-S, stall turns, etc zijn allemaal een genot, vooral met een vliegtuig dat ziet er zo goed, maar het is zo goed gedragen als sommige trainers toen net gevlogen in het circuit! Dit Gee Bee R3 is een briljante sport model dat geschikt is voor elk gebied, het formaat geeft ton aanwezigheid, is het uiterst moeilijk en vliegt uitstekend. Modellen die er deze geweldige vaak hanger koninginnen, niet de R3, prestaties en gebruiksgemak worden gecombineerd in één fantastische sport vliegtuig dat is net zo leuk om te vliegen en te bezitten!

Kenmerken:
Plug and Fly - Voeg eenvoudig uw ontvanger en LiPoly! (niet inbegrepen)
Gemakkelijk en snel te monteren
Superb en Eye Catching Looks
Tough EPO Foam
Heavy Duty onderstel en grote wielen kan bijna Tackle elke Strip
Verwijderbare 1pc Wing voor gemakkelijk transport
Goede grootte met Loads of Presence
Indrukwekkende Acrobatische prestaties in combinatie met Docile Low Speed ​​Handling

specs:
Spanwijdte: 1400mm
Lengte: 1328mm
Flying Gewicht: 2300g
ESC: 45A w / BEC
Servo: 9g x 2, 25g x 2
Motor: 3648 borstelloze Outrunner motor 600kv

vereist:
Uw Eigen 4 ~ 6-kanaals TX / RX
2650mAh ~ 3300mAh 4s LiPoly Battery

  • Gee Bee-R3 1400mm EPO
Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Reginald | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 25, 2015

Ive been flying this plane stock, no mods. A little Fidely with the build concerning the undercarriage not seating flush. Not a big problem but considering the wheels and mounts are quite a large part of the plane. I've flown it with 2200 4s to 3000 4s mha batteries and the aircraft has plenty of power for the full range of aerobatics. I set the CG at 108mm and as some one else mentioned the battery is nearly all the way to the servo's. The pane seems a little tail heavy at this CG but doesn't overly effect the flying too much. I haven't noticed any tendency to tip stall at low speed. Flight times of 9 minutes with 15pcnt remaining. It does like a little power for landings. Overall I'm very happy with this plane

suzygs1000 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 24, 2015

Very nice plane, and very easy to assemble. I am flying it on stock electronics, and it has plenty of power, and is easy enough fly, but needs to be landed under power, as it seems to have a tendency to tip stall. It is built for speed, as wing and ailerons do not appear to have sufficient area for successful 3d-ing. The tail wheel is miles to small for the weight of the plane, for me anyway, as I fly off very rough bitumen .... not really for the novice flyer, you would be better off with a full on 3d plane, as with low control settings, these are very easy to fly, and as a general rule, don't have tendencies to stall, and will float in for landings ...

rob0101 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 07, 2015

Beautiful detailing on the plane, went together quickly except for the rigging which takes a bit of time to get adjusted. Very uneventful maiden, flew well out of the box. Able to do loops, knife edge and flat turns easily. All in all a very nice plane. Had it up for seven flights the first day off a grass field. The landing gear is quite rugged and handles the grass easily. I would definitely recommend the plane. The only mod I made was to make a tab with electrical tape to make removing the battery compartment cover easier.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 17, 2015

Gee Bee R3 is best Air Plane

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 18, 2015

wonderful! such a huge airplane

very gentle in air, rubust build

i whould make the rear wheel a little bit bigger, it went out after 2nd landing

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 07, 2015

Trs bel avion ,belle finition il me tarde de le recevoir

Joseph | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jan 05, 2014

A few flights in now and wow does this thing fly nicely! Really gets a lot of attention at the field. It is also surprisingly big! Takes off in about 10 feet if you want it to. Will cruise around at 1/3rd throttle very happily. I am using 3000 mah bats and after 5 min flights of mixed throttle usage only put about 1400 mah back in, so i'm sure 7 min flights aren't out of the question. The battery compartment is huge, so huge in fact that I have fit a 4500 mah pack in with ease!. Build quality is pretty good. My only gripes with the model are the way the tail wheel attaches to the rudder, The flying wires are slightly sloppy fitting ( loose but easily fixable) and that the elevator and ailerons don't have real hinges, just the foam join, although the plane does come with spare parts, to include a bag full of nylon or plastic hinges it would be nice if they were pre installed. A couple little things I would recommend. I put a light coat of finishing epoxy on the entire airframe. This not only protects the foam from little dings, dents and scratched, but also really brings out the color and ads a fantastic shine! Also, put heat shrink tubing on all of the points where the flying wires attach to the springs, this really helps keep them in place. In all I am VERY satisfied with this model

anthony | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 26, 2013

Have now flown the Gee Bee several times fly's really well however had slight rolling when no input from controls, after landing and close inspection noticed the elevator centre section was very weak and believe was twisting under load have now epoxied u shap piano wire to centre joint and looking forward to next flight ( hope hobby king take note of this could be dangerous ) suggest anyone buying this model check elevator for twist simple to put right before assembly.

anthony | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Dec 07, 2013

I have recieved my Gee Bee R3 two days delivery, opening the box looks great, is now assembled and ready to go, so far seems fantastic value for money hope it fly's as good as it looks.
Problems encountered were assembly instruction photos not very clear, absolutely no info on the motor or ESC, ESC would not function so removed from the model is it programable ? is it bec or opto ? what max voltage would it take ?, also the motor is not marked at all so will it take a five cell lipo ?
On the verge of sending the ESC back as faulty my son said he had had the same problem and to adjust the travel to max on the throttle servo and now works perfectly, I wonder how many ESC's are sent back for being faulty when they are OK.
Just take your time assembling the model a lot of the plastic mouldings are handed, easy to stick them in the wrong place, close all the flying wire loops so the springs cannot come out and close all the spring hooks where required.
Foreseable problem if a wheel needs changing you will have to cut the side out of the spat to replace it, all in all really pleased with model so far

Steve S | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Nov 14, 2013

C of G in the book is way off. C of G should be around 95mm from LE at fuz with the plane the right way up

  1. 1
  2. 2
  3. 3
  4. 4
Klantbestanden
geebee r3 kitaro Download [32]
geebee r3 kitaro Download [32]
668195303X158594X12.jpg Download [490]
668195303X158594X44.jpg Download [449]
chambley-air-loisir Download [182]
GeeBee Tail Mod Download [102]
Gee Bee Tail Mod 2 Download [106]
Gee Bee Tail Mod 3 Download [91]
No File Name Download [555]
R3_001 Download [102]
  1. 1
  2. 2
  3. 3
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!