TPU98A Premium Soft Flesh Pink 500g 1.75mm HobbyKing
TPU98A Premium Soft Flesh Pink 500g 1.75mm HobbyKing
Print with strong, flexible filament to create spare parts, artworks and 3D models. TPU98A premium filament is easy to use for high-speed printing on both direct and Bowen style 3D printers. TPU98A filament has exceptionally high heat resistance (138℃) and can be stretched as far as 450% before reaching breaking point. TPU98A filament does not require the use of a heated bed and can even be printed straight onto glass.
PA-CX12@df needs to be dried for best 3D printing results. A standard air-circulated oven is sufficient. A guideline for drying is 2-3 hours at 110-130˚C for 100 gram (Please take care to remove the spool holding the filament as it will melt at much lower temperatures). Recommended temperature for heated bed is 80-100˚C or even higher.
PA-CX12@df will not bond perfectly to glass, but adheres well to a variety of “print stickers” and other bed adhesives. PA-CX12@df can be used on most common desktop FDM or FFF technology 3D printers.
Extremely flexible, the TPU98A filament can be used as vibration dampers, prosthetics or even orthopaedic insoles. Trust our premium TPU98A filament to create the best results every time. An excellent material choice for your next 3D printing project.
Features:
• Strong & Flexible
• Works on Direct & Bowden style 3D printers
• Printable at speeds of >75mm/s
• Exceptionally high softening point of 138°C
• 450% elongation at break
• Resistance to oils, greases & microorganisms
• Easily print watertight objects
Specs:
Width: 1.75mm
Weight: 500g
Colour: Soft Flesh Pink
Tensile Strength at Yield: 60 MPa
Strain at Yield: 0.08
Strain at Break: >150%
Tensile Modulus: 1400 MPa
Flexural Modulus: 1700 MPa
Flexural Strength: 90 MPa
Impact Strength - Charpynotched 23˚C: 14 kJ/m2
Moisture Absorption: 3,5%
Printing Temper: 240-260°C
Melting Points: 250°C
Shore D Hardness: 81
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly. HobbyKIng will supply this product with a moisture content <0,2%. After being out of the bag for several hours, redrying in an oven is recommended to eliminate moisture, please see method in the UPLOAD FILES tab.
Registreer u om video's te uploaden aanmelden of registreren
Registreer u om beoordelingen te schrijven aanmelden of registreren
Foppe | Geverifieerde koper
-
Overall
-
Quality
-
Value
Full of moisture
Dec 04, 2019
Derek | Geverifieerde koper
-
Overall
-
Quality
-
Value
TPU98A Premium?
Dec 03, 2018
TPU Drying Method | Download [168] |
Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!