Leverancier worden Blog Nieuwe items
Registreren

Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

PETG Premium Sky Blue 1kg 1.75mm HobbyKing

Generating Links

PETG Premium Sky Blue 1kg 1.75mm HobbyKing

Prijs:

Now save bespaar € 0,00 € 0,00

€ 22,03
Toestand:
Uit voorraad!
SKU:
9913000004-0
Geen verzendkosten? Klik hier meer leren!

Print with strong, flexible filament to create spare parts, artworks and 3D models. PET-G premium filament has high clarity and minimal shrinkage making it easy to use at a work bench or in the office.

PET-G @df can be used on all common desktop FDM or FFF technology 3D printers. The recommended temperature for heated bed is ± 35-60˚C and adhesion is possible on different surfaces.

Combining the advantages of PLA and ABS, this quality filament is odor neutral and hydrophobic, meaning that it won't absorb water. Trust our premium PET-G filament to create the best results every time. An excellent material choice for your next 3D printing project.

Features:
• High clarity
• Strong and flexible
• Almost no “warping”
• Hydrophobic (does not absorb water)
• Food contact acceptable
• Odor neutral printing

Specs:
Width: 1.75mm
Weight: 1kg
Colour: Sky Blue
Specific Gravity: 1,27 g/cc
MFR 190°C/2,16 kg: 6,4 gr/10 min
Tensile Strength at Yield: 50,4 Mpa
Strain at Yield: 5,9%
Strain at Break: 22.7%
Tensile Modulus: 2020 MPa
Flexural Modulus: 2050Mpa
Flexural Strength: 69 MPa
Impact Strength -Charpymethod 23˚C: 8,1 kJ/m2
Rockwell Hardness: 105
Moisture Absorption: 1104ppm
Printing Temperature: 195-220°C
Heat Deflection Temperature: 70°C
Transparency: 90%

Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.

 

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Dan | Geverifieerde koper

  • Overall
  • Quality
  • Value

Quality product at a fair price

Mar 28, 2022

HK branded PLA and PETG filaments are a great buy for the money! I find them to have good roundness, consistent melting point and accurate diameter. These characteristics make for quality prints.
I am happy to recommend them to anyone looking for a quality product at a fair price.

EJ | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good Quality as always, one minorish complaint.

Sep 25, 2021

This filament performed as it always has, good quality for the price. My only complaint is the end of the winding was not done very well. Before the rolls are completed the end of the filament runs up into the winding. So when you are about 80% into the roll you start to see, wrapped within the filament, the end of the roll. Normally this would be at the very end and tucked up into spool. I had 9 rolls and through 7 this seems to have been an issue each time. It didn't ever mess anything up but it could have if I didn't see it and snip it off. I could foresee it tangling at some point and messing up a print.

John | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good PETG

Jul 15, 2020

Hobbyking filament is shrink wrapped for delivery; but there are small pin prick holes in the wrapper, I assume to help with vacuum packing. This lets the moisture from the air in, and by the time its delivered the filament has absorbed too much water. PETG gets very stringy unless dried before use.
Its not up to the standard of Prusament; but for the price, HK filament is great and I like using it.

Roger | Geverifieerde koper

  • Overall
  • Quality
  • Value

Really good

Jun 03, 2020

Really good filament, printed perfectly and good price.

Thomas | Geverifieerde koper

  • Overall
  • Quality
  • Value

Good value PETG filament

Feb 26, 2020

This filament prints nicely on my printer @ 230C and 70C bed. I print on glass with a dried up PVA/water solution. It has a nice color.

Enryk | Geverifieerde koper

  • Overall
  • Quality
  • Value

Perfetto

Nov 30, 2019

Ottimo materiale peccato che non è piu disponibile in Europa...

vliegman | Geverifieerde koper

  • Overall
  • Quality
  • Value

Peteg 1.75

Nov 18, 2019

werkt fijn op mijn printer

Ross | Geverifieerde koper

  • Overall
  • Quality
  • Value

Prints nice

Oct 22, 2019

Prints well at a bit lower temp than other PETG, has the good properties of PETG, i.e. a bit a flex and ductile (rather than brittle) failure. This sky blue is a nice colour.

philippe | Geverifieerde koper

  • Overall
  • Quality
  • Value

fil 3D

Sep 11, 2019

nickel pour impression 3D

Jonny | Geverifieerde koper

  • Overall
  • Quality
  • Value

helnöjd

Feb 10, 2019

riktigt nöjd. mycket fin färg med.

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!