New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Hawker Hunter 70mm EDF Jet 6s w / Zet vrij & Kleppen WSR (PNF)

Hawker Hunter 70mm EDF Jet 6s w / Zet vrij & Kleppen WSR (PNF)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
3385 g
SKU:
HAWK-H-PNP-W
WANT FREE SHIPPING? Click here to find out more!

De Hawker Hunter was de UKs eerste geveegd vleugel vechter en was een groot succes wordt bediend door veel luchtmachten de overkant van de wereld. Ontworpen door de briljante Sir Sydney Camm, de Hunter was zeker een van de best uitziende jets van zijn leeftijd en ging over tot een aantal documenten met inbegrip van de wereld snelheidsrecord te breken in 1953, een andere geweldige record werd ingesteld toen 22 Jagers in formatie werden lus! The Hunter is nog steeds in gebruik als trainer recht in de jaren 1990 en is de geschiedenis ingegaan als een van de meest succesvolle en best uitziende Koude Oorlog strijders.

Deze zeer grootschalige en schitterend afgewerkte model is Plug N Fly, en omvat alle servo's pre-uitgerust en volledig metalen / afgeveerde trekt pre-gemonteerd. De pre-gemonteerde legering ventilator is zeer hoge kwaliteit, zeer krachtig, zeer vloeiende, betrouwbare en efficiënte, op de aanbevolen LiPoly dit apparaat produceert ongeveer 1700g stuwkracht. Een OPTO ESC is ook pre-uitgerust met een 5A UBEC om RX van stroom te voorzien. Hoewel het niet moeilijk om te bouwen, de Hunter is een beetje meer betrokken dan sommige PNF modellen. Het ontwerp is slim, met elke sectie als een 'module' wordt voltooid.

De zijdezachte geluid van de vooraf geïnstalleerde Unit Fan op 6s moet je horen om het te geloven. Dit model vliegt als het is op rails, en combineert snelheid met de stabiliteit en elegantie het is ook een koud kunstje om te landen dankzij de vooraf geïnstalleerde split flaps. Deze Hunter combineert kwaliteit en prestaties met hoofd draaien ziet er goed uit en is zeker om je te onderscheiden op het gebied vliegen.

specs:
Spanwijdte: 866mm
Lengte: 1157mm
Flying Gewicht: 1500g
EDF: 70mm Alloy met 2399kv borstelloze Inrunner Motor voor 6s
ESC: 60A OPTO Volledig programmeerbare ESC
Servo: 9 x High Torque Sub Micro Servo
RX Vermogen: HV UBEC verstelbare 5V / 6V Output

inclusief:
Alle Hardware & Decals
Foto Instruction Book
Pilot Figuur
Servo Uitbreiding & Y-Leads

vereist:
Uw Eigen TX / RX 6 Channel
2200mAh 6s ~ 2650mAh 6s LiPoly Battery

  • Sku HAWK-H-PNP-W
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht ( g) 3385.00
  • Lengte 1155.00
  • Breedte 250.00
  • Hoogte 300.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Pros: This is a typical Rc Lander plane. Lots of pieces and lots of steps with epoxy. Quality is excellent and all the parts fit together well. The paint is done well and and look really good. The cheater hole is covered with a solid piece of plastic and there is plenty of power.
Cons:I really wish this was a 4s system. The battery bay is really small and I'm having a hard time imagining a 6s pack in there, So plan on 2 3s packs. Lander, obviously thinks this is the way to go too as there is a series plug included (BTW everything is Deans T connectors, which is what I use). So, don't expect long flight times. THE BIGGEST disappointment is the manual retracts. They work fine (and are pre-setup) but I have to think Rc Lander has a ton of left over manual retracts to off load instead of including their nice electronic retracts. Fortunately, they seem tough and I had a set on my Lander F-16 and Panther and they held up fine.

If you've ever owned a Lander plane, no surprises here. If not, this is a lot more work than other EDFs on the market but in the end you get a very high quality plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pros: This is a typical Rc Lander plane. Lots of pieces and lots of steps with epoxy. Quality is excellent and all the parts fit together well. The paint is done well and and look really good. The cheater hole is covered with a solid piece of plastic and there is plenty of power.
Cons:I really wish this was a 4s system. The battery bay is really small and I'm having a hard time imagining a 6s pack in there, So plan on 2 3s packs. Lander, obviously thinks this is the way to go too as there is a series plug included (BTW everything is Deans T connectors, which is what I use). So, don't expect long flight times. THE BIGGEST disappointment is the manual retracts. They work fine (and are pre-setup) but I have to think Rc Lander has a ton of left over manual retracts to off load instead of including their nice electronic retracts. Fortunately, they seem tough and I had a set on my Lander F-16 and Panther and they held up fine.

If you've ever owned a Lander plane, no surprises here. If not, this is a lot more work than other EDFs on the market but in the end you get a very high quality plane.

Plane looks great! I am very pleased to see that hobbyking are beginning to get in some jets that are your average run of the mill!! good to see some other jets coming through!! maybe one day hobbyking might be selling the Saab Viggen....one can dream!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plane looks great! I am very pleased to see that hobbyking are beginning to get in some jets that are your average run of the mill!! good to see some other jets coming through!! maybe one day hobbyking might be selling the Saab Viggen....one can dream!

Fantastic jet, brought direct from a UK model shop. Flying weight stated as 1500g but mine came at 2300g with all the hardware included with the kit. Running mine on a 3200mah 35c 6s lipo and getting 850w. Good fast flight but not much vertical performance. Tends to tip stall and due to the high wing loading it comes in like a brick. Flys like it is on rails. I took all the undercarriage out and flaps and rudder to reduce weight and measured at 105 mph level flight. Fantastic jet well worth the money, but the elevator linkage needs sorting as the metal rod bends and deforms under pressure. Great aircraft and at a fantastic price, mine cosst 400 to get up so a real steal at this price!! :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic jet, brought direct from a UK model shop. Flying weight stated as 1500g but mine came at 2300g with all the hardware included with the kit. Running mine on a 3200mah 35c 6s lipo and getting 850w. Good fast flight but not much vertical performance. Tends to tip stall and due to the high wing loading it comes in like a brick. Flys like it is on rails. I took all the undercarriage out and flaps and rudder to reduce weight and measured at 105 mph level flight. Fantastic jet well worth the money, but the elevator linkage needs sorting as the metal rod bends and deforms under pressure. Great aircraft and at a fantastic price, mine cosst 400 to get up so a real steal at this price!! :)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save