Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

hexTronik DT1000 borstelloze Outrunner 1000kv

hexTronik DT1000 borstelloze Outrunner 1000kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
140 g
SKU:
413000003
Product
Omschrijving

Schijn bedriegt. Dit outrunner is ongeveer twee keer zo groot als een TowerPro bel motor, en zwaait een veel grotere prop. Zijn de gebruikte motor op een aantal van Art-techs nieuw vliegtuig kits, die testiment om zijn duurzaamheid, gebruiksgemak en kwaliteit.

Spec.
Vereiste Voltage: 11.1V
Max stroomverbruik: 35A
Max vermogen: 500W
Onbelast Current: 1.2A
Shaft: M4 (perfect geschikt voor Towerpor / GWS SF Slow Fly props)
Gewicht: 115g
Diameter: 41mm
Totale lengte: 66mm
Kv: 1000rpm / v
Wordt geleverd met mount, zoals aangegeven in Afbeelding

prop Test
Prop Maat Voltage Ampere Thrust
11x9 drie blade 11.1V 20A 1200g

Product
Specifications

Aanvullende Informatie

  • Sku:
    413000003
  • Brand:
    hexTronik
  • Gewicht ( g)
    140.00
  • Lengte
    80.00
  • Breedte:
    60.00
  • Hoogte:
    65.00
  • Kv ( tpm / v )
    1000.00
  • Max Currents (A )
    35.00
  • Vermogen ( W):
    500.00
  • Lengte B ( mm ):
    33.00
  • Kan Lengte D ( mm )
    13.00
  • Max Voltage ( V )
    12.00
  • Shaft A ( mm ):
    4.00
  • Unit Weight (g):
    115
  • C Diameter ( mm )
    41.00
  • Totale lengte E ( mm )
    66.00
  • Resistance ( mh ):
    0.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
These are great motors - powerful and efficient - using these to increase the power on a number of models without breaking the bank or being power hungary
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've had very good luck with these motors. I use them on my tricopter and they have lots of power. I have 10x4.5 props, pulling around 23 amps (per motor) at full throttle. I've had to replace the bearings in one after a crash, but that's to be expected. Make sure to secure the wires to prevent stressing the the connection to the stator, I used a little bit of 5 minute epoxy, worked great.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
???? ??? ? ??? ??? ???

?? ?? ?????
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good engine
pulls 1375 grams with Turnigy 2200 3s nano and an old wood 11 * 7
I have two of these and will buy more
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I use this motor in a Hk Club Trainer, with 10X6 prop and 40 ESC. I'm very satisfied with its efficiency, the plane climbs like a rocket and can performance any aerobatics with more than enough power. And furthermore a good price.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine doesn't work at all. Quality visibly worse than my original motor from Mustang P 51 Art-Tech (same as HK Mustang).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Este motor podria sustituirlo por El D4023 con Una 12/6 1500gramos esc 60 bis prrafo es sin ENTRENADOR Parecido al cesna 1,4 cm de envergadura.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor is just amazing I am using it with a 12x6 apc prop and a 50A ESC and a 3s 3500mwh tons of thrust and power . and just near worm after a 8 minute flight thanks hobbyking its cheap and good quality and its power .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
my test results are
3s 12x6 57 amps i stopped a little over 1/2 throttle
where did you get 11x9 three blade 11.1V 20A from?
completely ripped off with this motor
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I only give 3 Crowns because.....I bought four and they came with NO information. V X A = W. your specs call for a 11.1V at 35A = 388 watts??? you say 500 watts??? at 14.8 V x 35 amps = 518 watts?? So.. what is it? I don't want to burn out my motors using 14.8V But I want the 500 watts!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.