Registreren

Product Finder

Instellingen

Useful links

 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global
  • USA

hexTronik DT750 borstelloze Outrunner 750KV

hexTronik DT750 borstelloze Outrunner 750KV

QTY:

Now save bewaar € 0,62 € 0,62

Special Price € 10,92 € 10,92

You save bewaar € 0,62 € 0,62

Was  € 11,54

Stock:
Gewicht:
79 g
SKU:
DT750

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Omschrijving

Schijn bedriegt. Dit outrunner is ongeveer twee keer zo groot als een TowerPro bel motor, en zwaait een veel grotere prop. Zijn de gebruikte motor op een aantal van Art-techs nieuw vliegtuig kits, die testiment om zijn duurzaamheid, gebruiksgemak en kwaliteit.
De DT700 zal een 11x4.7 SF prop lekker swingen, tot meer dan 900 g stuwkracht te produceren.
Het is geweldig voor een grotere GWS foamies of parkfly vliegtuigen.

Spec.
Vereiste Voltage: 11.1V
Voorgestelde Batterij Capaciteit: 1300mAh +
Voorgestelde Prop: 11x3.8 of 11x4.7
Max stroomverbruik: 18A (met 11x4.7 prop)
Max stuwkracht: 1000g +
Onbelast Current: 1.4A
Shaft: 4M (perfect geschikt voor Towerpor / GWS SF Slow Fly props)
Gewicht: 78g
Diameter: 41mm
Totale lengte: 77mm
Kv: 750rpm / v
Wordt geleverd met mount, zoals aangegeven in Afbeelding

Test rapport.
We gebruikten de DAT700 outrunner aan de macht van de een Art-tech Pitts. Uitgevoerd met een 1300mAh 3s1p 20C pack, 18A BESC en 1147 GWS / TowerPro prop, de Art-tech pitts liep mooi. Uitstekende klim tarief, maar niet hoverable en met 13minute vluchttijden of meer, we waren erg onder de indruk.
Een zeer efficiënt outrunner voor langzamer vliegen modellen van maximaal 0,15 grootte.

Product
Specifications

Aanvullende Informatie

  • Sku:
    DT750
  • Brand:
    Nee
  • Gewicht ( g)
    79.00
  • Lengte
    88.00
  • Breedte:
    45.00
  • Hoogte:
    51.00
  • Kv ( tpm / v )
    Nee
  • Max Currents (A )
    Nee
  • Vermogen ( W):
    Nee
  • Lengte B ( mm ):
    Nee
  • Kan Lengte D ( mm )
    Nee
  • Max Voltage ( V )
    Nee
  • Shaft A ( mm ):
    Nee
  • Unit Weight (g):
    78
  • C Diameter ( mm )
    Nee
  • Totale lengte E ( mm )
    Nee
  • Resistance ( mh ):
    Nee
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Well, It spins, which is good.

The shaft is ridiculous but its easy to cut to length
Quality
Value
Overall
Quality
Value
Overall
A strong motor. Cut the shaft if you do not require the length. Make sure to wrap the motor in a plastic bag as small bits of metal will kill the motor if they get stuck to the magnets.
Quality
Value
Overall
Quality
Value
Overall
Good motor if you invest some time & money.
- needs balancing (all 6 I have bought)
- secure the wire with epoxy
- cut the shaft to the right size (a too long shaft gets bend easily)
- replace bearings (very important)

Use with 10,11,12 inch props. 12 inch needs 25 amp ESC.

I'm using them on an RCExporer Tricopter: Hover time about 25 mins. Flight time about 10 to 17 min depending how much full throttle.

Quality
Value
Overall
Quality
Value
Overall
Unbelievably efficient motors. Only requires a 20A ESC but delivers the lift.

Quality
Value
Overall
Quality
Value
Overall
Extremely good motor, especially for the price.There is one thing I dont like, and its the long motor shaft. I've only had one problem with this motor and its the E Clip on the bottom falling off in a crash, so remember to check if its firmly in place before you mount your motor. I recommend it!
Quality
Value
Overall
Quality
Value
Overall
Good motor, especially for the price. I dont like the long motor shafts though. I've had one proble with this motor, and thats the E clip on the bottom falling off, so just make sure its firmly in place before you mount your motor.
Quality
Value
Overall
Quality
Value
Overall
propellor batterie, amps&thrust

9055 carbon 3S/7,2A/530g 4S/11A/890g
Gemfan 9"x4.7 3S/9,8A/730g 4S/14,3A/1150g
10"x4.5 wood 3S/15,5A/900g 4S/22A/1300g
9"x4.5 3 blade 3S/15,5A/920g 4S/22A/1350g
Gemfan 10"x4.5 3S/15A/1050g 4S/22A/1500g
Gemfan 11"x4.7 3S/15A/1150g 4S/21A/1550g

Replace the tiny allen grubscrews in the mount with proper M3 allenbolts, so you can properly tighten them (use loctite) and won't lose your motor in midair!
Also use loctite on the grubscrew securing the motor shaft, or you might bind the bearings when tightening your prop on the shaft.
Quality
Value
Overall
Quality
Value
Overall
DT750 3S 4S

prop Amps thrust Amps thrust

9055 carbon 7,2 530 11 890

Gemfan 9"x4.7 9,8 730 14,3 1150

10"x4.5 wood 15,5 900 22 1300

9"x4.5 3 blade 15,5 920 22 1350

Gemfan 10"x4.5 15 1050 22 1500

Gemfan 11"x4.7 15 1150 21 1550

Quality
Value
Overall
Quality
Value
Overall
Great motor apart from the long shaft! But is very efficient in power and thrust. Great for large depron scratchbuilt slow flyers and works well on a RCExplorer tri!

Lacks punch but it is a low Kv motor after. However great thrust on 10 to 12inch props!
Quality
Value
Overall
Quality
Value
Overall
Lots of power to pull my home made foam board projects.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.