Become a Dealer Blog
Registreren

Totale prijs

US$ 0,00

Winkelmand 0 Winkelmand 0 Loading...

HK-500CMT (TT) 3D-Torque Tube Helicopter Kit Align T-Rex Compat.

Generating Links

HK-500CMT (TT) 3D-Torque Tube Helicopter Kit Align T-Rex Compat.

 
Prijs:

Now save bespaar US$ 0,00 US$ 0,00

US$ 101,47
Al gekocht Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
HK500CMT-TT
Geen verzendkosten? Klik hier meer leren!

Accessoires

De hoogste SPEC HK Heli, de CMT is alle metalen, alle koolstof en allll goed!
Je can''t upgrade van deze slechte jongen, het is al een upgrade naar het maximum!
Veel groter dan het 'is kleiner 450 broer, de 500CMT is een spannende helikopter om in actie te zien en nog spannender om te vliegen. It ''s 2024 legering hoofd zorgt voor harde kern 3D pilots zal niet teleurgesteld in de prestaties en de prachtig beschilderde kap en Titanium geanodiseerd componenten maken dit een visueel verbluffende helikopter met prestaties om een ​​back-up!
Carbon Fiber belangrijkste frame, CF horizontale en verticale lamellen ook volledig metalen tail unit maakt deze heli perfect voor Pro ''s!
Alle onderdelen zijn 100% compatibel met T-Rex 500
Inbegrepen zijn hoofd en staart blades & Carbon Fiber boom ondersteunt.
Klik hier voor de onderdelen en upgrades.

Wij garanderen u gewoon een beter geprijsd heli van deze kwaliteit te vinden overal!

Functies.
Lichtgewicht ontwerp biedt fantastische vlucht prestaties en extreme 3D-mogelijkheden.
Rotor kop / staart met druklagers.
Direct-to-swash CCPM koppeling.
Zwaartepunt van accubak ontworpen dicht bij de rotor hoofd.
Hoog rendement Torque-Tube gedreven metal staart.
Volledig gedreven staart automatische rotatie systeem.
Tail servo boom monteren.
Carbon Fibre Main Frame en giek steun staven.

Specificatie.
Lengte: 840mm
Lengte: 310mm
Hoofd rotor diameter: 970mm
Staart rotor diameter: 200mm
Motor rondsel: 13T
Main gear aandrijving: 162T
Tail drive gear: 31T
Drive gear ratio: 1: 12.46: 4.68
Gewicht (zonder power systeem): 1370g
Flying gewicht: ca. 1700g


Vereiste items.
Borstelloze Outrunner Motor
Servo's: Zie gekoppeld onderstaande punten.
Radio Gear: Gyro / Rx
ESC: 80A of hoger.
Batterij: 2 x 2200mAh 3S 20C of hoger.

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

Baz | Geverifieerde koper

  • Overall
  • Quality
  • Value

Not good

Oct 13, 2019

Poor quality and nothing even close to a trex 500 clone. No parts whatsoever are compatible. Quality of the parts is sad. Stripped nuts and bolts. No manual.or instructions and a complete waste of time and money. Parts missing. Useless. Dont bother

Gustavo Sganzerla | Geverifieerde koper

  • Overall
  • Quality
  • Value

Update to my previous review, tail authority improvement.

Jan 21, 2017

Update to my previous review: The lack of right rudder (nose-right tail rotor authority) that I was experiencing was not due to lack of tail rotor pitch but lack of tail servo torque. When spinning, the centrifugal force acting on the tail rotor blade grip pitch links forces the tail rotor to zero pitch. The higher the revs, the higher the tendency for the tail rotor blades to center at zero pitch. Above a certain head speed, the servo I was using simply ran out of torque to overcome this centering force, and that was causing the lack of nose-right tail rotor authority. I solved this problem by using an original Align tail rotor pitch control arm off of my Trex 600 ESP (it fits the 500 beautifully). This Align arm is longer on the side that connects to the servo pushrod, giving the tail servo higher mechanical advantage. So, either get a very strong tail servo or change the pitch control arm (google Align part number H60186A). Also, iinstalling the ball link on the innermost hole on the tail servo arm will help the servo deliver more torque to the pitch control arm. The servo I used for the tail is an HKS-9257 running on 5.5 volts. After tinkering with this heli a bit to solve a bunch of minor issues, I am now very happy with it. Thanks HobbyKing!

Gustavo Sganzerla | Geverifieerde koper

  • Overall
  • Quality
  • Value

Has a few kinks that have to be ironed out but, overall, good product.

Jan 09, 2017

I own an Align T-Rex 600 ESP and decided to build myself a HK 500 CMT TT with fairly cheap electronics, just to see how good or how bad of a heli this would get me. Turns out, I got quite a nice heli out of it. But this product does have some kinks that need to be ironed out by the builder: 1- The canopy needs to be reinforced where it connects to the bottom front of the frame (used toilet paper and CA glue for this, simple fix). 2- Gears on the front torque tube transmission were binding rather severely (after about 5 or 6 flights they wore themselves in and worked smoothly from then on). 3- Main blades and tail blades work, but they cause a fair amount of vibration (It flew fine on the original blades but Align main and tail blades improved the flying qualities and smoothness quite a bit). 4- Don't use very high head speeds or you will overstress the tail rotor, resulting in failure of the tail blade grip bolts and explosion of the tail rotor (there are several reports of this occurrence in other reviews; here CF Align blades help, as they are much lighter than the stock tail blades). 5- Torque tube must be rolled over a flat glass table and straightened-out by hand (also a simple fix). 6- Make sure to use every bit of tail pitch available, as you run out of right rudder on this heli fairly easily when using low rotor head speeds and pumping collective (not a problem when using normal head speeds, just don't go crazy high on the revs). Electronics used: Turnigy H3126 1600 KV motor and 13-tooth pinion, YEP-60A ESC, HK-752MG cyclic servos, HKS-9257 tail servo, Mini K-Bar flybarless controller, RJX flybarless head, Orange R-620x receiver. The original flybarred rotorhead is surprisingly smooth and well built, but I never did use it. Overall, I like this heli and think it is a great product if you are willing to do some tinkering to correct a few simple bugs and issues. And I love the clear windshield on the canopy. Gustavo Sganzerla, Brasilia, Brazil.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 07, 2016

Vous serez peut-être moins heureux de savoir que j'ai récemment acheté un hélicoptère pour lequel je n'ai aucune notice de montage, de réglage et de maintenance.

Donc ce modèle est toujours dans son carton, et s'il n'est pas possible d'avoir ces documents, il finira à la poubelle car je ne prendrais pas le risque de faire voler cet engin de manière hasardeuse et / ou périlleuse.

Bien entendu, je ne manquerais pas de faire une publicité négative auprès de mes collègues, et il ne sera plus jamais question de commander chez Hobby KIng.

A vous de choisir l'avenir.

Daniel

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 12, 2015

great helicopter, super stable, great price and other than the canopy it is a beautiful helicopter.

rainerwahnsinn | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2014

The Frames are different to the original T-Rex 500. The Battery tray is located higher than the original and the 3000mAh Turnigy Packs won't fit below the canopy.
Some Screws are different to the original Align, where Plastic screws were needed in this Heli are metric screws used.
There is no velcro, manual delivered and the Frames have very sharp edges.
I have only used the Maingear and the Tail to make my T-Rex looking like a Heli again. Flight test is still outstanding because the ESC is not back from manufacturer. (Not an HobbyKing-Issue). In summary I would say, that this Heli is not really 100pcnt compatible with Align.

michael | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 14, 2014

I have a Trex 500, but wanted to fly this kit first because of the price difference. Overall nice kit. However, I was missing the main blades from the box. After filing a claim(as a return, since there is no claim for missing parts) I was informed that I had to submit a photo or video of the issue before they would consider it. I asked what they wanted, a pix of the missing part? No response yet. I've placed 22 orders with HK, with no problems with any others. You'd think they would want to keep me as a satisfied customer over a $10 part.

Garry4 | Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 08, 2013

For the price very good deal. Torque tube and tail pitch slider had to replaced after 2 flights. Ordered my second one which will be converted to fbl.

Geert | Geverifieerde koper

  • Overall
  • Quality
  • Value

Customer Rated

Jun 17, 2013

Snel geleverd via DE warehouse. Heli is erg compleet afgeleverd. Torque tube vervangen, was krom. Tevens linkage ball van swash vervangen, schroefdraad was te kort. Dit resulteerde in een crash toen de nick losschoot. Veel trilling in de heli, kwam door veel te ruimte op de metal main rotor housing. Deze ook vervangen door origineel. Tevens hoofdas vervangen door origineel. Maindrivegear vervangen, van hk was krom. Originele maindrivegear was recht en 6 gram zwaarder. De linkage ball van alle servo hevels vervangen, de originele zijn niet met een moertje geborgd en zitten er naar mijn idee niet echt goed vast. Conclusie: Veel heli voor weinig, bouwen was prettig, over sommige onderdelen is niet goed nagedacht. Toch tevreden.

| Geverifieerde koper

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 23, 2013

Just resived may heli and hes in perfect condition

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 9
Klantbestanden
hk 500 Download [1907]
hk 500 Download [1972]
HK500TT in action Download [96]
Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!