New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HKPilot Mega LED Driver Board 12V (4ch) (APM)

HKPilot Mega LED Driver Board 12V (4ch) (APM)

Shipped From:
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 4,19
status:
In voorraad
SKU:
387000046-0
WANT FREE SHIPPING? Click here to find out more!

Deze eenvoudig te gebruiken led driver board is ontworpen en ingericht voor het uitvoeren van externe Led indicatoren uit uw HKPilot Mega of APM. U kunt eenvoudig de controle 12V led's tot 700mA van de A4 ~ 7 pinnen op uw APM compliant Flight controller. 12V externe hoge zichtbaarheid LED-indicatoren voor Motor wapens, arm-status, GPS, en lage spanning kan nu eenvoudig worden bediend met dit moet vlucht controller accessoire.

specs:
Ingangsspanning: tot 12V
Output: 700mA
Gewicht: 5,3 g
Kanalen van de LED's: 4

* Opmerking: De verwijzing naar APM verwijst naar het ArduPilot project, een familie van open source stuurautomaten op basis van de Arduino open source computing-platform, ontwikkeld door 3DR en de open source gemeenschap. Het bestaat uit een keuze van ArduPilot Mega (APM) elektronica en een scala aan gratis software versies voor verschillende voertuigen en wordt bestuurd door een open source creative commons licentie.

* Let op: Dit is geen originele Arduino merkproduct.

  • Sku 387000046-0
  • Brand H-King
  • Capaciteit ( mAh ) -
  • Gewicht 18.0000
  • Lengte 30.00
  • Breedte 10.00
  • Hoogte 30.00
  • HK Pilot Mega Accessories
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Easy to setup and does exactly what it is suppose to.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Easy to setup and does exactly what it is suppose to.

Great little board. Built flame wheel quad with HK Pilot Mega. Used four green / red LED strips for the arms. Connected the driver board input connection to the pilot mega inputs. Connected the very small power wires to the power distribution board. Great light display whin the quad is powered up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little board. Built flame wheel quad with HK Pilot Mega. Used four green / red LED strips for the arms. Connected the driver board input connection to the pilot mega inputs. Connected the very small power wires to the power distribution board. Great light display whin the quad is powered up.

using this in combination with strip lights makes it easier to know whats happening. im using it for Arming, GPS might add a 12v buzzer as well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

using this in combination with strip lights makes it easier to know whats happening. im using it for Arming, GPS might add a 12v buzzer as well

Used with 4x 3-LED long RGB-strips, one Red, one Green, one Blue and one White. Works great, and apparently on lower voltages too (~9 V) if you prefer dimmer LEDs, feeding with 3S should work, maybe even 2S if you'd need it? Hardware information: The chip is a Texas Instruments ULN2003A Darlington transistor array, datasheet can be found by searching for "uln2003a.pdf", seems like it has the capability to drive up to seven loads.
Downsides: The 12V input wires seem a bit flimsy for 700mA.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used with 4x 3-LED long RGB-strips, one Red, one Green, one Blue and one White. Works great, and apparently on lower voltages too (~9 V) if you prefer dimmer LEDs, feeding with 3S should work, maybe even 2S if you'd need it? Hardware information: The chip is a Texas Instruments ULN2003A Darlington transistor array, datasheet can be found by searching for "uln2003a.pdf", seems like it has the capability to drive up to seven loads.
Downsides: The 12V input wires seem a bit flimsy for 700mA.

Great board. It came without instructions,but I soldered some test leds and figured out outputs.I use it on my s500 quadcopter - apm 2.5.2 from HK. Led strip(6x smd led) on each arm of frame. Just set parameter "LED_MODE" to 107(default is 9). I have gps lock blue led. When battery voltage is low red leds are flashing. Firmwavre is AC 3.2 rc7.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great board. It came without instructions,but I soldered some test leds and figured out outputs.I use it on my s500 quadcopter - apm 2.5.2 from HK. Led strip(6x smd led) on each arm of frame. Just set parameter "LED_MODE" to 107(default is 9). I have gps lock blue led. When battery voltage is low red leds are flashing. Firmwavre is AC 3.2 rc7.

No instructions came with mine. The video is too general to be useful. Please supply a wiring layout or smple setup so that people can use these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

No instructions came with mine. The video is too general to be useful. Please supply a wiring layout or smple setup so that people can use these.

Customer files
Ignore my horrible soldering! ;) Download [1238]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save