New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HKPilot32 autonoom voertuig 32Bit Control Set w / Power Module

HKPilot32 autonoom voertuig 32Bit Control Set w / Power Module

Discontinued Product

Please continue searching for a similar product.
SKU:
387000050-0
WANT FREE SHIPPING? Click here to find out more!

De HKPilot32 is de volgende stap in FC hardware met zijn krachtige ST micro 32bit ARM Cortex kern en enorme I / O-ondersteuning. De HK Pilot32 is een van de meest geavanceerde automatische piloot systemen beschikbaar met ondersteuning voor bijna elk type voertuig vanaf een maan rover of een multirotor vliegtuigen, zelfs een onderzeeër! Opgemaakt door PX4 open hardwareproject wordt gesteund door een aantal ontwikkeling gemeenschappen waardoor dit een van de meest flexibele en betrouwbare platforms voor voertuig controle, met vele mogelijkheden en functies ervoor beschikbaar zijn in de toekomst.

Met krachtige geïntegreerde multithreading NuttX RTOS, een Unix / Linux-achtige programmeeromgeving, volledig nieuwe automatische piloot functies, automatische detectie en configuratie van randapparatuur en een naadloze overgang van een HK Pilot Mega of APM, deze geavanceerde mogelijkheden verwijder de beperking tot uw autonoom voertuig.

Voor documentatie en gebruikershandleidingen klik HIER

Kenmerken:
• Geavanceerde 32 bit ARM Cortex® M4 processor draait NuttX RTOS
• 14 PWM / servo-uitgangen (8 met failsafe en handbediening, 6 hulp, high-power-compatibel)
• Overvloedige aansluitmogelijkheden voor extra randapparatuur (UART, I2C, CAN)
• Geïntegreerde back-up systeem voor in-flight herstel en handbediening met speciale processor en stand-alone stroomvoorziening
• Back-up systeem integreert mengen, consistente automatische piloot en handbediening mengen modes
• Redundante voeding inputs en automatische failover
• Externe knop veiligheid voor eenvoudige motor activering
• Multicolor LED-indicator
• High-power, multi-tone piëzo audio indicator
• microSD-kaart voor de lange-time high-rate logging

specs:
Grootte: 81x44x15mm
Gewicht: 33.1g
microprocessor:
32-bit STM32F427 Cortex M4 kern met FPU
168 MHz / 256 KB RAM / 2 MB Flash
32 bit STM32F103 failsafe co-processor
sensoren:
ST Micro L3GD20 3-assige 16-bit gyroscoop
ST Micro LSM303D 3-assige 14-bit accelerometer / magnetometer
InvenSense MPU 6000 3-assige accelerometer / gyroscoop
MEAS MS5611 barometer
interfaces:
5x UART (seriële poorten), een high-power staat, 2x met HW flow control
2x CAN
Spektrum DSM / DSM2 / DSM-X® Satellite compatible ingang tot DX8 (DX9 en vooral niet ondersteund)
Futaba S.BUS® compatible input en output
PPM somsignaal
RSSI (PWM of spanning) ingang
I2C®
SPI
3.3 en 6.6V ADC inputs
Externe microUSB-poort

inbegrepen:
HK Pilot32 autopilot
Zoemer
Safety switch knop
10s power module met XT60 connectoren en 6-positie connector kabel
Extra 6-positie kabel aan op een GPS + kompas module aan te sluiten
Micro-USB-kabel
SD-kaart
montage foam
3-aderige kabel servo
I2C splitter module met kabel

Opmerking: HK Pilot32 is een PPM-ingang autopilot, wat betekent dat het krijgt RC input van een enkele kabel naar de ontvanger, hetzij via de PPM-poort, de Futaba S.BUS poort of de speciale satellietontvanger poort voor Spektrum versnelling. De meeste moderne RC-ontvangers zorgen voor PPM-uitgang, maar sommige, zoals niet-S.BUS Futaba ontvangers niet.

* PX4 / Pixhawk is een onafhankelijke, open-source, open hardware project gericht op het verstrekken van een high-end automatische piloot aan de academische, hobby en industriële gemeenschappen (BSD licentie gegeven)

** De verwijzing naar APM verwijst naar het ArduPilot project, een familie van open source stuurautomaten op basis van de Arduino open source computing-platform, ontwikkeld door 3DR en de open source gemeenschap. Het bestaat uit een keuze van ArduPilot Mega (APM) elektronica en een scala aan gratis software versies voor verschillende voertuigen en wordt bestuurd door een open source creative commons licentie.

* Let op: Dit is geen originele Arduino merkproduct.

  • Sku 387000050-0
  • Brand HobbyKing
  • Capaciteit ( mAh ) -
  • Gewicht 153.0000
  • Lengte 110.00
  • Breedte 45.00
  • Hoogte 80.00
  • HKPilot 32
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

To say I hate this controller is an understatement. To buy this is to begin a journey of frustration and spending. After spending another $200 on equipment to complete the kit, replace the crap power sensor, connect all the bits to my plane and then it flakes out on my ESC? Naze32 runs my Wing great, before and after the HKPilot. It just boggles my mind how involved you have to get just to run this POS. I was going to spend all night googling esc issues and playing with my Taranis settings to fix it, but decided my time is worth more than the cost of this god-awful vehicle controller.
I'll try it on my quad next. It has non-HK ESC's, so might work better.... but don't hold your breath folks.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

To say I hate this controller is an understatement. To buy this is to begin a journey of frustration and spending. After spending another $200 on equipment to complete the kit, replace the crap power sensor, connect all the bits to my plane and then it flakes out on my ESC? Naze32 runs my Wing great, before and after the HKPilot. It just boggles my mind how involved you have to get just to run this POS. I was going to spend all night googling esc issues and playing with my Taranis settings to fix it, but decided my time is worth more than the cost of this god-awful vehicle controller.
I'll try it on my quad next. It has non-HK ESC's, so might work better.... but don't hold your breath folks.

The FC are satisfied were purchased to replace existing products. After using it seems to be more accurate evaluation.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The FC are satisfied were purchased to replace existing products. After using it seems to be more accurate evaluation.

Excellent, better than the Megapilot 2.7 Ive got from HK. The Megapilot 2.7 was not able to save log files with correct date and time. This however, is flawless thus far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent, better than the Megapilot 2.7 Ive got from HK. The Megapilot 2.7 was not able to save log files with correct date and time. This however, is flawless thus far.

Overall, I love it. It works great out of the box. Just one tip to setup the Battery Monitor correctly, I hve chosen the following settings from Mission Planner and they work great as it measures both Vols and Ams:
Monitor: 4: Voltage and Current
Sensor: 0: Other
APM: 5: VR Brain 4.5 - 5

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall, I love it. It works great out of the box. Just one tip to setup the Battery Monitor correctly, I hve chosen the following settings from Mission Planner and they work great as it measures both Vols and Ams:
Monitor: 4: Voltage and Current
Sensor: 0: Other
APM: 5: VR Brain 4.5 - 5

I bought an Aerosky hexacopter more than a year ago with a MultiWii flight controller and could never get the hex to fly properly! I was going to change the MWC for an APM 2.5 flight controller but found this Pixhawk and the price was reasonable so I picked it up. That ended up being a good call, as APM:Copter will stop supporting the APM 2.x flight controllers in the next release (3.3), and the current 3.2.1 runs like a dog on the older hardware (if you want PosHold you have to use the previous 3.2 on an APM 2.x FC, which is only slightly better on the older hardware)! I ended up having to buy the GPS, MinimOSD and telemetry radios separately, but finally got everything installed on the hex frame and the maiden flight went like a dream! It went even better than my first flight on a DJI Phantom 1.1.1, which had been the best "out of the box" flight experience up till now. Once I did the Autotrim, it flies very well and is rock solid on loiter (except in gusty winds) and with landing (no bouncing like the both Phantom and the Quanum Nova does). The Pixhawk fired up right away, no issues with connecting to it, with updating firmware or configuration. I've tried out autonomous flight and it is rock solid on navigation. I was starting to sour on APM:Copter due to the issues using an APM:2.x FC, but all those issues went away with the Pixhawk FC. I'm a fan again!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought an Aerosky hexacopter more than a year ago with a MultiWii flight controller and could never get the hex to fly properly! I was going to change the MWC for an APM 2.5 flight controller but found this Pixhawk and the price was reasonable so I picked it up. That ended up being a good call, as APM:Copter will stop supporting the APM 2.x flight controllers in the next release (3.3), and the current 3.2.1 runs like a dog on the older hardware (if you want PosHold you have to use the previous 3.2 on an APM 2.x FC, which is only slightly better on the older hardware)! I ended up having to buy the GPS, MinimOSD and telemetry radios separately, but finally got everything installed on the hex frame and the maiden flight went like a dream! It went even better than my first flight on a DJI Phantom 1.1.1, which had been the best "out of the box" flight experience up till now. Once I did the Autotrim, it flies very well and is rock solid on loiter (except in gusty winds) and with landing (no bouncing like the both Phantom and the Quanum Nova does). The Pixhawk fired up right away, no issues with connecting to it, with updating firmware or configuration. I've tried out autonomous flight and it is rock solid on navigation. I was starting to sour on APM:Copter due to the issues using an APM:2.x FC, but all those issues went away with the Pixhawk FC. I'm a fan again!

Look, this is a cheaper version of the pixhawk but so far has lived up to the performance. If you use telemetry don't expect to see perfect voltage or current readings, also in my case I initially used a poor prop/motor match and ended up chasing and comparing PWM output signals when really the controller was fine. While some of the documentation is dated (same documentation for the clone and the real thing, so it isn't HK's fault) this is a great controller for the money with a lot of room to grow.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Look, this is a cheaper version of the pixhawk but so far has lived up to the performance. If you use telemetry don't expect to see perfect voltage or current readings, also in my case I initially used a poor prop/motor match and ended up chasing and comparing PWM output signals when really the controller was fine. While some of the documentation is dated (same documentation for the clone and the real thing, so it isn't HK's fault) this is a great controller for the money with a lot of room to grow.

it didnt take long to set it up using youtube, but then...on my first test flight with FC i crashed my tricopter...well "it wasnt me".....when it got of the ground and in the air it couldnt hold stable position rotation wise,it was spinning like hell,i flipped switch from stable to loiter(before take of i got 9 satelites in lock on gps,cheked via laptoop) and it went skyhigh like a rocket, i saw it flying away up in sky,tryed to flip back into stable and lower the throtle but that didnt work it kept climbing,so i flipped to RTl and then i saw a nice show, it turrned slightly to the left of me and went sideways and slowly flipping upside down and towards the ground on full speed. it was 70 kph into the ground,luckily did hit no one,just the concrete playground, burst into flames coz of lipo fire.......so far im down for 600$ because of that strange behavior of that FC.every thing shattered and burned.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

it didnt take long to set it up using youtube, but then...on my first test flight with FC i crashed my tricopter...well "it wasnt me".....when it got of the ground and in the air it couldnt hold stable position rotation wise,it was spinning like hell,i flipped switch from stable to loiter(before take of i got 9 satelites in lock on gps,cheked via laptoop) and it went skyhigh like a rocket, i saw it flying away up in sky,tryed to flip back into stable and lower the throtle but that didnt work it kept climbing,so i flipped to RTl and then i saw a nice show, it turrned slightly to the left of me and went sideways and slowly flipping upside down and towards the ground on full speed. it was 70 kph into the ground,luckily did hit no one,just the concrete playground, burst into flames coz of lipo fire.......so far im down for 600$ because of that strange behavior of that FC.every thing shattered and burned.

I love the pixhawk. This one is affordable and the components fit well together. The unit came well packaged. Arrived within a week of ordering. Wiring, plugs and fitting all in box as advertised.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love the pixhawk. This one is affordable and the components fit well together. The unit came well packaged. Arrived within a week of ordering. Wiring, plugs and fitting all in box as advertised.

Functions as described, a great Pixhawk clone. The best part is that it is a fraction of the cost and works the same!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Functions as described, a great Pixhawk clone. The best part is that it is a fraction of the cost and works the same!

I love it, so much faster and better that my previous APM, very good quality from HK, I fly a lot and have never had an issue so far, am running AC3.2.1 firmware on it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love it, so much faster and better that my previous APM, very good quality from HK, I fly a lot and have never had an issue so far, am running AC3.2.1 firmware on it

  1. 1
  2. 2
  3. 3
Customer files
2m hex Download [3180]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save