New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

HobbyKing AP-03 7000kv borstelloze micro-motor (3,1 g)

HobbyKing AP-03 7000kv borstelloze micro-motor (3,1 g)

Shipped From:
  • USA
  • Global
QTY:

Now save bewaar € 0,00 € 0,00

€ 16,58
status:
In voorraad
SKU:
HK-AP03-7000
WANT FREE SHIPPING? Click here to find out more!
Hoge kwaliteit micro-motoren. Precisie wond met zilver-koperdraad en ultra hard-pers lamellen.
Extreme prestaties en efficiëntie voor uw microplane.

Factory Spec.
Kv: 7000rpm / v
Range lipo: 1S 3.7V
Voorgestelde prop: 3020
Max stroom: 3A
Burst stroom (10sec): 4A
Gewicht: 3,1 g (inclusief mount en draad)
Shaft: 1.5mm
Shaft lengte: 6mm
Afmetingen: 13 x 10mm
Testgegevens:
3020 prop (aanbevolen)
Voltage: 3.7V
Huidige: 2.1A
Thrust: 44g
Voor 30g 3D vliegtuig en 60g normaal vliegen.
  • Sku HK-AP03-7000
  • Brand HobbyKing
  • Gewicht 15.0000
  • Lengte 85.00
  • Breedte 17.00
  • Hoogte 70.00
  • Kv ( tpm / v ) 7000.00
  • Max Currents (A ) 4.00
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 4.00
  • Vermogen ( W) 16.00
  • Shaft A ( mm ) 2.00
  • Lengte B ( mm ) 10.00
  • C Diameter ( mm ) 13.00
  • Kan Lengte D ( mm ) 4.00
  • Totale lengte E ( mm ) 16.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very cool little motor, I it put into my HK micro J3 cub paired with the XP 3A .7g micro esc, and 3x2 GWS prop. All up weight on the cub is now 42grams and performance is fantastic.
Be prepared to do some very fine soldering, and find some very small mounting screws.
This little Gem is well worth the brushless conversion cost on a micro flyer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very cool little motor, I it put into my HK micro J3 cub paired with the XP 3A .7g micro esc, and 3x2 GWS prop. All up weight on the cub is now 42grams and performance is fantastic.
Be prepared to do some very fine soldering, and find some very small mounting screws.
This little Gem is well worth the brushless conversion cost on a micro flyer.

fr kleine Depron Hallenflieger gut

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fr kleine Depron Hallenflieger gut

Measured weight is 3.3g with bare wires. Even a lightweight connector will add an extra .1g so the practical weight would be closer to 3.4g. This motor is designed for a single LiPo cell. The advertised 44g thrust with a 3x2 GWS prop is pretty optiistic. That might be achievable with perfect soldering, thick wires and a brand new high end LiPo, but my personal experiments with Zippy 350 mAh cells and thin wires and connectors (to save weight at the cost of increased resistance) managed to spin a GWS 3x2 prop at around 20.000 RPM, pulling 2.6A for a static thrust of about 36g. Anything larger than a 3x2.5 (for instance a 3x3 or 3.5x2) will overload this motor (drawing more than 3 amps at 100pcnt thrust). A 4x2.5 would go beyond 5A, ending in a puff of blue smoke before you could even throttle back . Still a very good motor for 30-60g planes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Measured weight is 3.3g with bare wires. Even a lightweight connector will add an extra .1g so the practical weight would be closer to 3.4g. This motor is designed for a single LiPo cell. The advertised 44g thrust with a 3x2 GWS prop is pretty optiistic. That might be achievable with perfect soldering, thick wires and a brand new high end LiPo, but my personal experiments with Zippy 350 mAh cells and thin wires and connectors (to save weight at the cost of increased resistance) managed to spin a GWS 3x2 prop at around 20.000 RPM, pulling 2.6A for a static thrust of about 36g. Anything larger than a 3x2.5 (for instance a 3x3 or 3.5x2) will overload this motor (drawing more than 3 amps at 100pcnt thrust). A 4x2.5 would go beyond 5A, ending in a puff of blue smoke before you could even throttle back . Still a very good motor for 30-60g planes.

buen motor muy pequeo y fuerte

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

buen motor muy pequeo y fuerte

Motor seems good quality but do not use for 1s use on any p@rkz0ne um planes. Tried to convert polecat to 1s and it was a huge waste of time for same as stock performance or worse.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor seems good quality but do not use for 1s use on any p@rkz0ne um planes. Tried to convert polecat to 1s and it was a huge waste of time for same as stock performance or worse.

this is so so soooo tiny ...very cool product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this is so so soooo tiny ...very cool product.

It works ok for my 42g 450mm wing-span micro trainer. I use it with AR6400 DSM2 RX, 3A 1g 1S ESC, 1S 200mah 20C Li-pol, and 4x2,5 prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It works ok for my 42g 450mm wing-span micro trainer. I use it with AR6400 DSM2 RX, 3A 1g 1S ESC, 1S 200mah 20C Li-pol, and 4x2,5 prop.

I have done some thrust testing with various propellers on the AP03-7000kv motor.
See this video.
Youtube.com/watch?v=6WMros9ZCjA

Works good on a 1s LiPo system with certain props and batteries like GWS 5030 prop and 160mah Nanotech on a XP3A ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have done some thrust testing with various propellers on the AP03-7000kv motor.
See this video.
Youtube.com/watch?v=6WMros9ZCjA

Works good on a 1s LiPo system with certain props and batteries like GWS 5030 prop and 160mah Nanotech on a XP3A ESC.

It's so tiny! It is smaller than the picture makes it look, but its still a good motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's so tiny! It is smaller than the picture makes it look, but its still a good motor.

Awesome LITTLE motor, I use it in my UM P51 and boy it pulls.
Best prop I found so far is a 4030.

I use it combined with a XP 3A ESC.
10 stars

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome LITTLE motor, I use it in my UM P51 and boy it pulls.
Best prop I found so far is a 4030.

I use it combined with a XP 3A ESC.
10 stars

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save