Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren
Shipped From:
  • Global

HobbyKing EDF Hoverjet (Plug and Hover)

HobbyKing EDF Hoverjet (Plug and Hover)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1506 g
SKU:
EDF-HOVERJET

Combine

essential items and
battery
acc
Product
Omschrijving

Like it snel? Like it opzij? Dan is HobbyKing EDF Hoverjet voor u!

Gebouwd rond 2 krachtige 55mm EDF units de HobbyKing EDF Hoverjet klaar is voor hoge snelheid Geen technieken ontbloot hover actie. De taaie polyurethaan en kunststof composiet chassis zorgt voor een duurzame en lichte platform optimale lift en snelheid. Spring het, drift of het alleen maar draai het op de plek tot je duizelig! de HobbyKing EDF Hoverjet is gegarandeerd plezier!

De HobbyKing EDF Hoverjet wordt geleverd met twee 55mm EDF units, twee SER's en een 9gram stuurservo voor de stuwkracht vectoring systeem vooraf geïnstalleerd. Alles wat u nodig heeft is een 2200mAh 3s1p LiPoly batterij en je eigen 2-kanaals zender en ontvanger (Tx / Rx)

specs:
Lengte: 355mm
Breedte: 225mm
Lengte: 110mm
Gewicht 396g (niet inclusief batterij en Rx)
Batterij Plug: XT-60

Lift System:
EDF: 55mm 6 Blade
Motor: 2225-2000kv
ESC: 10A

Thrust System:
EDF: 55mm 6 Blade
Motor: 2225-3650kv
ESC: 20amp
Steering: Thrust Vectored systeem met behulp van 1 x 9gram servo

Vereiste:
1800 ~ 2200mAh 3s1p LiPoly Battery
2-kanaals Tx / Rx

Opmerking: De HobbyKing EOF Hoverjet is voor afgedichte oppervlakken en is niet geschikt voor water.

Product
Specifications

Aanvullende Informatie

  • Sku:
    EDF-HOVERJET
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    1506.00
  • Lengte:
    390.00
  • Breedte:
    120.00
  • Hoogte
    245.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Got mine today and shipping was good time and packed well. everything worked, but the esc gets hot quick. I had to shut it down after 2 minutes using a Turnigy 3s 2200 25c When I go slow I got a little more time on it, but not much. Not too impressed with it was expecting more for the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this because the wife wanted to try something new when the RC car was getting boring.

Minus
It lasted 30 seconds before the ESC and motor for Lift burned out.
Wasn't even going full speed on a completely flat surface.

Plus
The 30 seconds it lasted it was great fun.
The stickers has to be applied to the body, which I think is good because then you can make it in your way.

Spare parts will be ordered soon and hopefully it will last a bit longer
Going for a gyro as well as that seems to be helping a bit for handling according to another review.

Going to pimp it with some lights as well for some night hovering.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nuostabus daiktas,tik sunkiai valdosi blede ta.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice quality and looks like a good bargain every thing fits in chassis good, can't wait to use when weather gets warmer!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Maiden run of my Hover Jet this evening.
Setup:
Turnigy 1800
Radio HK-T4A Transmitter
HK-GT2R
old piezo mini Gyro

Really smoth run without any problems.
Good control with a cheap Gyro.
Speed for the 50 next runs really o.k.
Lift EDF BL (2000KV)could be a little bit stronger.
Looking for a higher KV BL.
The 3S died with this run. Rest in Piece T1.8.
Low Voltage beep alert highly recommended
and ordered now.
Nice Machine, lot of fun!
Greetings Mike
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this hovercraft is great. it drives like a drift car on an ice rink, as in: EPIC. you can go round corners completely sideways, just have to steer with both rudder throttle combined. to go round a corner: approach the corner at 3/4 throttle, turn it about 45 degrees and cut throttle to 1/2 about four feet away from the corner. once you get to the corner, turn the rest of the way round and increase throttle, feathering the throttle a bit if you have to. you should be sliding sideways, like a drift car. counter steer, so as not to spin, and begin to straighten on the way out of the corner. slowly straighten out, do not jerk back to straight. returning to straight too violently will make the rotary inertia spin it too far, leading to a violent swinging from side to side as one overcorrection leads to another. now onto the review: this is a great hovercraft, but the lower foam piece tends to tear off if running on asphalt. other than that, this is a really fun hovercraft at a good price. DEFINITELY ORDER FROM THE U.S. warehouse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pas une voiture, pas un bateau, pas un avion, mais 100pcnt fun !
Pilotage en drift, gaz fond !
Voyez ma vido sur ma chaine youtube: stf650

www. youtube.com/user/stf650


Not a car, not a boat, not a plane, but 100pcnt fun!
Drift in steering, full throttle !
See my video on my youtube channel: stf650

www. youtube.com/user/stf650
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3 batteries through it and its falling apart , gets dirty dirty quick,
really hard to control , seems like the lift fan is starting to fail as it sounds like the bearings are chattering , i dont give it more than a few more batteries and it will be parts . i would avoid this its really a dissapointment and seems very very poorly made
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello every one,
I am looking for two replacement motors for my hoveryet can annybody help me becouse i cant find a suiteble motor

Thnx

Grtz zubresco
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
i got my hoverjet a few days ago, and think it's pretty cool. i added lights to it (cuz i often drive at night) and with the 9volt battery for the 10 lights,& 3S 2200ma lipo battery it seems a little heavy. I kinda want a bigger lift motor to accommodate the extra weight, but am unsure of which motor would work best. any suggestions?? otherwise,, it's pretty fast once it gets going, but there's lots of cracks and uneven spots in street, so i think it would hover better on a flatter surface. it's a nice change from the usual cars and trucks i drive!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
custom hoverjet download now [283kb]

Combine

essential items and
battery
acc

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.